Daikin iLINQ Room Terminal Instruction Manual
Daikin iLINQ Room Terminal
Installaon & User Manual
UM-ILINQRT
Only personnel that have been trained to install, adjust,
service, maintenance or repair (hereinafter, “service”)
the equipment specified in this manual should service the
equipment. The manufacturer will not be responsible for
any injury or property damage arising from improper
service or service procedures. If you service this unit, you
assume responsibility for any injury or property damage
which may result. In addition, in jurisdictions that require
one or more licenses to service the equipment specified in
this manual, only licensed personnel should service the
equipment. Improper installation, adjustment, servicing,
maintenance or repair of the equipment specified in this
manual, or attempting to install, adjust, service or repair
the equipment specified in this manual without proper
training may result in product damage, property damage,
personal injury or death.
WARNING
2
Table of Contents
4
4
5
6
7
7
7
7
8
11
12
12
12
12
14
14
14
15
15
15
16
16
16
16
17
18
18
18
21
21
22
24
24
24
24
25
25
26
26
26
27
27
27
28
28
28
4
1 Introducon
1.1 Room Terminal Components
Part Number Name Picture Descripon
Room Terminal
hotspot
5
1.2 Room Terminal Kits
iLINQ Room Terminal Flush Mount - ILINQRTFM
Part # Quanty Descripon
1 iLINQ Room Terminal
1
1
1
2
2
iLINQ Room Terminal Surface Mount - ILINQRTSM
Part # Quanty Descripon
1 iLINQ Room Terminal
1
1
1
2
2
6
1.3 System Overview
•
•
•
•
•
•
•
•
•
•
Figure 1 - Room Terminal Installaon
7
1.4 Soware Requirements
2 Room Terminal Hardware
2.1 Components and Specicaons
2.1.1 Room Terminal 0130L00292
• Supply Input Voltage:
• Power Absorpon:
• Installaon:
• LCD Type:
• Resoluon:
• Acve Display Area:
• Temperature/Humidity Probe:
• Wi-Fi:
• Serial Port:
• Ethernet Port:
• Physical Dimensions (inches) & Onboard Components:
Figure 2 - Room Terminal Operaons
8
Item Descripon
1
2
4
5
6
7
2.1.2 Power Supply 0130L00293
• Output Voltage:
• Output Current:
• Input Voltage:
• Input Power Consumpon:
• Physical Dimensions (inches) & Onboard Components:
Figure 3 - Power Supply Dimensions
2.2 Wiring Specicaons
HIGH VOLTAGE!
DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT.
MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY
CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
• Power Supply Power Input:
• Room Terminal Power Input:
• Serial Communicaon:
• Ethernet:
XS2 XS2 AG AG AG
G
G0
U1
U2
U3
GND
+VDC
J1 J2
-
+
J11
VIN
GND
VOUT
GND
-
+
VDC +
VDC -
1
NOTES
1
1SHEILDED TWISTED PAIR 20-22 AWG
2
2
2MALE RJ45 STP CAT5 CABLE. BOTH DDC CONTROLLER ETHERNET
PORTS ARE ACCEPTABLE FOR TERMINATION.
3ALL LOW VOLTAGE CONNECTIONS ARE CLASS 2. USE COPPER
CONDUCTORS ONLY FOR ALL FIELD CONNECTIONS.
Room Terminal
Serial
Communication
Terminal Block
(Factory Installed in RTU Control Box)
Power Supply
iLINQ DDC
Controller
Ethernet
Power Supply
Input
Room Terminal
Power Input
Figure 4 - Point to Point Wiring Diagram
3 Installaon Instrucons
HIGH VOLTAGE!
DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT.
MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY
CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
3.1 Electrical Wiring
3.2 Room Terminal Enclosures:
•
•
•
•
•
•
Surface Mount:
Flush Mount:
3.3 Room Terminal
3.4 Frame
11
3.5 Power Supply
POWER SUPPLY
24 VAC
SOURCE
POWER SUPPLY
24 VAC
SOURCE
Figure 5 - Small Chassis Figure 6 - Medium Chassis
POWER SUPPLY
POWER SUPPLY
24 VAC
SOURCE
24 VAC
SOURCE
Figure 7 - Large Chassis Figure 8 - DB 15-20 Ton Large Chassis
3.6 Wiring Terminaons
12
4 iLINQ System Conguraon
4.1 Space Temperature and Space Humidity Source - Room Terminal
1. Press and hold 2. Press and enter Service Password
Factory Default = 1954
4. Press Controller Display
3. Press enter icon
Figure 9 - Room Terminal Conguraon
4.2 Space Temperature and Space Humidity Source - Onboard LCD
1. Enter Service Password
Factory Default = 19542. Select “Unit Config” 3. Set “Space Temp Src” and “Space Hum Src” to Trminal
Figure 10 - iLINQ Controller Onboard LCD Conguraon
4.3 Space Temperature and Space Humidity Source - Web Interface
Figure 11 - iLINQ Controller Web Interface Conguraon
5 Room Terminal User Interface
5.1 User Interface Navigaon
•
•
•
Figure 12 - UI Navigaon
14
5.2 Home Page
5.2.1 Layout
③
②
⑤
⑤
①
④
⑤
②
⑥⑦
Factory Default Show All Hide All
① ②
④③
⑥
①
Figure 13 - Home Page Layouts
Item # Item Descripon
1
2
4
5
6
7
*NOTE: Values from Items 1 and 2 are sent from the room terminal and are normalized by the iLINQ controller (i.e., Osets, etc.).
5.2.2 Occupancy Indicaon
Unoccupied State Occupied State
Figure 14 - Unoccupied vs Occupied RTU State
15
5.2.3 Occupancy Override
•
•
Figure 15 - Occupancy Override Icon
5.3 Detail Page
5.3.1 Overview
Figure 16 - Detail Page
16
Item # Item Descripon
1
2
4
5
6
7
8
*NOTE: Values from Items 1 and 2 are sent from the room terminal and are normalized by the iLINQ controller (i.e., Osets, etc.).
5.3.2 Mode of Operaon
Figure 17 - Mode of Operaon Icons
5.3.3 Detail Page Occupancy Indicaon
5.4 Space Temperature Setpoint Adjust Page
5.4.1 Page Access
17
Press and hold
Figure 18 - Space Temperature Setpoint Adjust Page Access
5.4.2 Overview
①
②
③
④
⑤
Figure 19 - Space Temperature Setpoint Adjust Page
Item # Item Descripon
1
2
4
5
*NOTE: Value from Item 1 is sent from the room terminal and is normalized by the iLINQ controller (i.e., Osets, etc.).
18
5.5 Live Trend Page
•
•
•
•
•
5.5.1 Overview
③
①
④
②
⑤
⑦
⑥
Figure 20 - Live Trend Page
Item # Item
1
2
4
5
6
7
5.5.2 Graphing Window
5.5.3 Legend
5.6 Historical Trend Page
•
•
•
•
•
5.6.1 Page Access
Tap to access Historical Trend Page
Figure 21 - Historical Trend Page Access
5.6.2 Overview
③
①
④
②
⑤
⑥
⑦
⑧
Figure 22 - Historical Trend Page
Item # Item Descripon
1
2 -
4
5
6
7
8
5.6.3 Graphing Window
5.6.4 Cursor and Timestamp
This manual suits for next models
1
Table of contents
Other Daikin Touch Terminal manuals
