Allied Telesis RMT60 User manual

Datasheet | Remote Multiservice Terminal
Product Overview
The RMT60 (Remote Multiservice Terminal) is a
sealed, climate controlled cabinet that protects
Allied Telesis access equipment from water, dust
and all other outdoor elements.The RMT60 is
one of a choice of nine sizes of cabinets and lets
service providers select an exact match for their
needs, with the assurance that Allied Telesis
integrates the Multiservice Access Platform and
associated equipment before shipment.
Capacity
The RMT60 cabinet can accommodate up to 10
MiniMAP 9100s, five iMAP 9400s, or two iMAP
9700s. Initial capacity needs can be met and the
design allows for future growth. Allied Telesis will
work with service providers to find an ideal
cabinet size with port counts ranging from small
to large sized applications for POTS, DSL or
FTTx deployments.The enclosure and Allied
Telesis equipment will then be integrated and
shipped.
Turnkey System
The RMT60 includes Allied Telesis integrated
Multiservice Access Platforms (iMAPs), a DC
power plant, POTS splitters, cable management
and other accessories are also installed in the
cabinet and tested before shipment.This
reduces on-site staging and the chance for
installation errors.
Connectivity
The RMT60 supports POTS, ADSL/ADSL2+,
VDSL2 and fiber, as well as mixed POTS,
ADSL/ADSL2+,VDSL and fiber deployments.
The RMT60 is unique in its use of high
performance CAT5 cabling for ADSL2+ and
VDSL2 applications.This reduces noise and
crosstalk to improveoverall performance, paving
the wayto higher reliability and more service
choices. Service providers can expect to see
improved rate vs. reach as a result of the
optimized cabling schemes.
Flexibility
The RMT60 uses an expandable power
supply system that supports entry-level needs
and easily grows to support additional demand.
Battery back-up, battery heaters, pad/pole
mounting kits, integrated cross connects and
protection systems are optional.
Reliability
The RMT60 meets
Telcordia GR-487
standards. Battery compartments are sized
to accommodate up to two 170 amp hour
batterystrings providing for eight hour battery
back-up.The cabinets require little, if any,
maintenance for fans and filters.
Key Features
•Integrated environmentally controlled cabinet for
Outside Plant (OSP) deployments
•Integrated power supplies and Allied Telesis
integrated Multiservice Access Platforms
•Arange of OSP cabinet sizes and configurations
sized to meet deployment needs
•Supports POTS, xDSL, legacy telephony and
fiber FTTx deployments
•Sealed design with efficient, low maintenance
environmentally controlled cooling
•Meets Telcordia GR-487 requirements
•Optional batteries, battery heater, generator
connector, integrated cross connect and other
cabinet accessories
•Optional CAT5 wiring between all cabinet
components
RMT60
Remote Multiservice Terminal
Allied T
elesis www.alliedtelesis.com

Technical Specifications
Physical Characteristics
Dimensions 111.8 x 182.4 x 106.7cm
(W x H x D) 44 x 71.8 x 42in
Weight 363kg (800lbs)
Enclosure Mounting
Pad
Mounting Space
118.5in (54RU)
Hole Spacing on Racks
One inch
Rack Widths
23in EIA std
Center Mounting
Standard 12in deep
Heat Exchanger
One
Temperature
Fan turns on 32°C(90°F)
High temp. alarm 65°C (150°F)
Heat dissipation 2400W
AC System
Eight position AC load center
Convenience Outlets
Two in equipment chamber
One in power chamber
Battery Heater Pad
Optional
Compatible Batteries
8 x 48vDC
Battery Amp-hour Reserve
Up to 340 AMP hours
Padlockable
216-type tool
Intrusion Alarm
Local with remote location options
Bonding and Grounding
110-position dual-holed
L49 copper buss, 3/16in
Cable Entrance
3x2.5in cable cones
Protect Field
Up to 800-pair
Cross Connect Field
Up to 1200-pair
Ordering Information
AT-TN-R015-A Cable, alarm, 10ft
AT-TN-R016-A Fiber tray
AT-TN-R022-A Hubbel con for external generator, 30A
AT-TN-R023-A RLS block, 50-pair, CAT3, 3M MS2 conns
AT-TN-R024-A Battery (1) 12vDC, 155AH, front post
AT-TN-R027-A Bullet breaker, 30A
AT-TN-R028-A Protection block, 200PR, CAT5,
3M MS2 conns
AT-TN-R031-A 25A rectifier
AT-TN-R032-A Rectifier controller, LAN capable
AT-TN-R034-A 200-pair copper protection - wired with
CAT 3 cabling and connectorized with
3M MS2 connectors
AT-TN-R035-A 50-pair RLS block wired with
CAT 5 cabling and connectorized with
3M MS2 connectors
AT-TN-R043-A RMT60 with 2400 Watt heat exchanger
AT-TN-R044-A RMT60 MESA 2 NxT wide body with
2400 Watt heat exchanger
AT-TN-R045-A RMT60 SAI upgrade kit including swing
frame and mounting hardware
AT-TN-R046-A 400-pair copper protection -
wired with CAT 3 cabling and
connectorized with 3M MS2 connectors
AT-TN-R047-A 400-pair copper protection -
wired with CAT 5 cabling and
connectorized with 3M MS2 connectors
AT-TN-R048-A RMT60 battery heater pad
AT-TN-R049-A External hubbel generator connector -
60A
AT-TN-R050-A SAI pad mount template for RMT60
AT-TN-R051-A 20A rectifier
AT-TN-R053-A 10A rectifier
AT-TN-R138-A Valere DC power package for two or
more iMAP 9700 chassis
RMT60 |Remote Multiservice Terminal
USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 T
ai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2008 Allied T
elesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000277 Rev.A