Dake E-16 User manual

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 1 –Section II
JOHNSON VERTICAL BAND SAWS
INSTRUCTION MANUAL AND PARTS LIST
SECTION II –Electrical Diagrams
FOR MODELS
E-16 (And Old Style V-16)
V-16
V-24
VH-24
V-40
VH-40
MODEL: ________________________________________
SERIAL NUMBER: ________________________________
DATE PURCHASED: ______________________________
DAKE Division of JSJ
724 Robbins Road
Grand Haven, Michigan 49417
616.842.7110 Phone [phone]
616.842.0859 Fax [phone]
Web: www.dakecorp.com
E-mail : [e-mail]
[e-mail]

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 2 –Section II
If machine is to be
operated
At 440 volt 3 phase power,
please read the following
warning.
WARNING!
This machine must be wired by a qualified
electrician. Do not connect 440-volt power directly
to this machine. The use of the stop down
transformer supplied with this machine must be
used. Failure to do so may affect warranty, if
damage occurs from improper wiring.

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 3 –Section II
Model V-16 : Drawing 85380S1

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 4 –Section II
Model V-16 : Drawing 85380S2

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 5 –Section II
Model V-16 : Drawing 85380S3

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 6 –Section II
Model V-24 & V-40 : Drawing 86557S1

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 7 –Section II
Model V-24 & V-40 : Drawing 86557S2

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 8 –Section II
Model V-24 & V-40 : Drawing 86557S3

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 9 –Section II
Model VH-24 & VH-40 : Drawing VH40S1

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 10 –Section II
Model V-24 & VH-40 : Drawing VH40S2

7/24/17
Manual V-16, V-24, VH-24, V-40 & VH-40 11 –Section II
Model V-24 & VH-40 : Drawing VH40S3