Dakota Micro OverView DMOV-7M-C2 User manual
DakotaMicro,Inc.
8659148thAve.SE
Cayuga,ND58013
www.dakotamicro.com
Author:CNR Title:UserManDMOV‐7M‐C2Rev:10/18/17
RearViewMonitoringSystem
UserManual
PartNumber:DMOV‐7M‐C2
www.dakotamicro.com
TROUBLESHOOTING
Problem Possible Causes
No picture, no sound Improper connection with 12v power adapter.
Use of unauthorized power supply
Monitor is in OFF position
No picture Check whether AV cable is securely plugged in
No sound Check whether audio connector is secure
Check whether the sound volume is turned off or down
Dark picture Ensure that bright and contrast settings are properly
adjusted
Ensure monitor is warm enough
No color Ensure color settings are properly adjusted in menu
Upside down or lateral
inverted picture
Check horizontal/vertical adjustment on remote
Event Triggers not
activating (i.e. No
picture during triggered
event)
Event trigger is not securely connected
Remote Controller Fault Battery may be dead or improperly installed:
replacement battery Model:CR2025,3V
Remote controller is not pointed in the direction of the
receiving sensor on monitor
Too far away or improper angle: The maximum effective
distance between the remote controller and the receiving
sensor is 15 feet and the angle is 30 degrees.
Obstacle: Move any obstacles out of the path
LIMITEDWARRANTY
• 7inchLEDbacklit,highresolutionTFTLCD
• Widevoltageinput:11‐32V
• 3VideoChannelInputs
• Manualorautomaticimageswitchingmodes
• Forward/Mirrorimageselection
• EventTriggersprovidedforall4cameras.Camerascanbetriggeredforeventssuchas
backinguporapplyingthebrakes
• Powerisprovidedonlytotheactivecamera,prolongingthelifeofthecameras
• AVinputandoutputjacksprovided
• AutoON/OFFLEDsensorautomaticallytriggersnightvisionwhenrequired
• Includescreditcardstyleremotecontrol
• Backlitcontrolbuttonsenableeasymenunavigationinalllightingconditions
• Pleasereadentiremanualbeforeusingourproducts
• BeforeyoupoweryourrearOverViewsystem,ensurethatallcablesareproperly
connectedtoavoiddamagetothesystem
• MonitorISNOTWATERPROOF,pleasedonotplacethemonitoroutdoors
• Ensurethatallcablesareroutedasufficientdistancefromhightemperatureareasand
rotaryobjects
• Toensureproperheatdispersal,ensurethatventholesinmonitorremainclear
• Donotopenthemonitororcameracasing,doingsowillvoidthewarranty
• DONOTwatchDVDsetc.whiledriving
• Pleasedonotusecausticchemicalstowipethecameraand/ormonitor
Subjecttothedisclaimer,limitationsandotherdirectionsstatedhereafter,DakotaMicro,Inc.warrantsthat
theProductwillbefreefromdefectsinmaterialandworkmanshipforperiodsasstatedhereafterfromthe
dateoforiginalpurchase.THISWARRANTYISEXPRESSLYMADEINLIEUOFANYANDALLOTHER
WARRANTIES,EXPRESSORIMPLIED,INCLUDINGTHEIMPLIEDWARRANTIESOFMERCHANTABILITYOR
FITNESS.THEEXCLUSIVEREMEDYOFTHEBUYERISLIMITEDTOREPAIRORREPLACEMENTOFTHEPRODUCT.
EXCEPTASSTATEDINTHISWARRANTY,DAKOTAMICROSHALLNOTBELIABLEFORANYLOSS,
INCONVENIENCE,ORDAMAGE,INCLUDINGDIRECT,SPECIAL,INCIDENTAL,ORCONSEQUENTIALDAMAGES,
RESULTINGFROMTHEUSEORINABILITYTOUSETHEPRODUCT,WHETHERRESULTINGFROMBREACHOF
WARRANTY,NEGLIGENCE,STRICTLIABILITYOFANYOTHERLEGALTHEORY.Anyoralstatementsor
representationsmadebyanyonewhicharecontrarytooratvariancewiththetermsstatedinthis
LIMITEDWARRANTYarevoid.
DakotaMicrowill,atitsoption,eitherrepairthedefectorreplacethedefectiveProductorpartthereofwithanew
orremanufacturedequivalentatnochargetothepurchaserforpartsorlaborfortheperiodofthree(3)yearsfor
AgCam/EnduraCamcameras,two(2)yearsforAgCam/EnduraCammonitors,quadsandwireless.TwelveMonths
(12) forallOverViewCameras&Monitorsaswellasallothercablesandaccessories.
TheDakotaMicrolimitedwarrantyperiodsoutlinedaboveapplythroughouttheUnitedStatesandCanadaonly.A
one(1)yearmaximumlimitedwarrantyforallProductsappliestoallothergeographiclocationsunlessotherwise
statedinwritingbyDakotaMicro.
Thislimitedwarrantydoesnotapplytoanyissuesconnectedwithappearancethathavenorelationtothe
performanceoftheProductnortoanyProducttheexteriorofwhichhasbeendamagedordefaced,whichhas
beensubjectedtoimpropervoltageorothermisuse,abnormalserviceorhandling,orwhichhasbeenalteredor
modifiedindesignorconstruction.
Inordertoenforcetherightsunderthislimitedwarranty,thepurchasershouldfollowtheprocesssetforthon
page3ofthisPolicy,andprovideproofofpurchasetoDakotaMicro,Inc.Neitherthesalespersonnelof
DakotaMicronoranydealeroranyotherpersonisauthorizedtomakeanywarrantiesotherthanthose
describedherein,ortoextendthedurationofanywarrantiesbeyondthetimeperiodsdescribedherein.
ThewarrantiesdescribedhereinshallbethesoleandexclusivewarrantiesandremediesprovidedbyDakotaMicro.
Correctionofdefects,inthemannerandfortheperiodoftimedescribedherein,shallconstitutecomplete
fulfillmentofallliabilitiesandresponsibilitiesofDakotaMicrotothepurchaserwithrespecttotheProduct,and
shallconstitutefullsatisfactionofallclaims.InnoeventshallDakotaMicrobeliableorinanywayresponsiblefor
anydamagesordefectsintheProductwhichwerecausedbyrepairsorattemptedrepairsperformedbyanyone
otherthanDakotaMicro.
Somestatesdonotallowthelimitationonorexclusionofincidentalorconsequentialdamages,sosaidlimitationmay
notapplytoyou.
Anyactionatlaw,suitinequity,orotherjudicialproceedingfortheenforcementofanyrightprovidedforherein
orotherwise,orwithrespecttoanyclaimthatapurchasermayhaveagainstDakotaMicro,Inc.shallbeinstituted
onlyintheCourtsoftheStateofNorthDakota,eitherinthestatedistrictcourtlocatedinWahpeton,NorthDakota
orinFederalDistrictCourtlocationinFargo,NorthDakota.Withoutregardtoconflictsoflawprinciples,thelawsof
thestateofNorthDakotashallgoverntheinterpretationandenforcementofthetermsofthisLimitedWarranty
andallaspectsoftherelationshipbetweenDakotaMicroandthepurchaser.
Thiswarrantygivesyouspecificlegalrightsandyoumayalsohaveotherrights,whichmayvaryfromstatetostate
WARNINGS
WARNINGS
The OverView camera system is intended for light use and is not intended to be utilized in harsh
conditions such as high vibration, high moisture, and use in or around corrosive substances or
other high impact or corrosive situations. Should a heavy duty camera be required for your
application, an AgCam or EnduraCam camera from Dakota Micro should be utilized and is
warranted for this type of use. Warranty will be void on this system should it be utilized outside of
its recommended applications.
FEATURES
9 2
I. MonitorIntroduction
ConnectionChart
EventTriggerwireCAM1(white*)
①Left/Vol‐ ②Right/Vol+ ③Menu ④Down/CamSelecti
⑤Up/CamSelection ⑥QuadViewModeSwitch ⑦ON/OFF
Power/Video
Harness
Connectorwith
screws
FUSE
1)
Cameras1‐3haveanavailableeventtriggerwire.Camerasareidentifiedas1,2and3
CAM1‐Whiteconnector
CAM2‐Blueconnector
CAM3‐Brownconnector
2)
RegardlessifmonitorisONorOFF,ifpowerisappliedtothetrigger,activatedcamerawillbecome
powered
*EventTriggerwirecolorsaresubjecttochangewithoutnoticeandmayvaryslightlyfromthe
colorsindicatedabove.
Monitor
Included Components
②
Monitor w/ bracket
Monitor remote control
Power/Video harness
x2 Camera(s) w/ bracket
x2 40ft power/video cables
12v lighter adaptor
Screen Size
7” (16:9) digital panel
Overall Size
185mm(W)x124mm(H)x48(D) without mounting
bracket
Weight 400g
Power Input AC 10.5-16.9V, 1,200 ma (2 cameras)
Color System NTSC/PAL auto switch
Operating Temp -4°F~122°F (-20°C~50°C)
Brightness 400cd/m
2
Resolution 800(RGB) x 480
Contrast 500:1
Number of Camera Inputs 4
⑦
①
③④⑤⑥
4
7
X. ButtonFunction
MUTE
PressMutetoturnsoundoff，toresumevolume,pressMuteagainorpressVOL+.
POWER
PowersmonitorONandOFF.
CHbutton(up/down)
ToselectCH(Up)orCH(Down)
VOL‐/+
a. Adjustvolumeofmonitor.
b. Adjustbrightness,contrast,etc.
c. Toactivateotherfunctions,suchas,mirror/normalimageswitch,delaytimeadjustment,etc.
MENU
Displaysmonitormainmenu.
MODE
Usercanusethiskeytoselectfourmodes:standardcolor,softcolor,richcolorandbright.
CALL
PressthisbuttonistodisplaycurrentlydisplayedAVchannel.
TIMR
Timesetupofsleepoff,itisusedtosetthetimeoffwithin120minutes.
C/E/P
Languageselection:ChoiceofChineseorEnglish.
AC1/AV2/AV3
Pressthisbuttontotogglebetweenthe3videoinputs.
VI. MonitorOperation
Monitor
Remote Control
VII.MonitorMenuInstructions
a. Picture
Defaultvaluesformonitorbrightness,contrast
andsaturationis50.NTSChuedefaultissetto0.
Brightness,contrastandsaturationvaluescanbe
adjustedfrom0‐100.Huevaluecanbeadjusted
between‐50to+50.
b. ChannelReverseSetup
Defaultvaluesforpicturemodeisnormal(N‐LR).
Eachchannelhas4viewingmodesavailable:
LR(normalImage)
M‐LR(mirrorimage)
M‐UD(mirrorupsidedownimage)
N‐UD(normalupsidedownimage)
c. ReversePrioritySetup
ThedefaultreversechannelisCAM1.Default
priorityissetto:CAM1>CAM2>CAM3.Pressthe
arrowstochangeprioritybetweenCAM1and
CAM2.
WhenCAM2hasreversepriority,orderissetto:
CAM2>CAM1>CAM3
WhenCAM3hasreversepriority,orderissetto:
CAM3>CAM1>CAM2
IMPORTANTNOTE:Keysdonotworkwhensystemisinreverse.
8
3
III.InstallationofPower/VideoHarness
VII. Install/RemoveSunShade
V. MonitorBracketInstallation
Plug in securely and tighten screws
Monitor
Installation
Top Clip-buckle
Complete
Bottom Clip-buckle
Remove
Top Clip-buckle
Video System NTSC
Image Pick-up Device Sharp 1/3” Color CCD
Horizontal Resolution 600 Horizontal lines
Minimum Illumination 0 LUX @ F2.0
Lenses Furnished Board Lens 2.8mm
Synchronous System Internal Synchronization
Operating Temp -4°F~122°F (-20°C~50°C)
Power Supply DC12v +/-10%
Waterproofing Criteria IP68K
Dimensions 74mm(W) x 55.5mm(D) x 63.5mm(H)
6
5
VIII. RemoteIntroduction
.
Exit menu and save the settings
Remote Control
Monitor
Mute ON/OFF
Up
\
CAM Selection
Volume-
Volume+
Menu
Down
Call
Mode
Sleep
Language
Quad View Mode Switch
Horizontal Flip Calendar
Vertical Flip
IX.ReplacingtheBatteryinyourremote
BatteryModel:
CR2025
d.T‐DELAYsetup:
DefaultdelaytimeforeachCHis0S(seconds).You
canadjusttheamountofdelaytime(howlongthe
imageremainsonthescreenafterthetriggered
eventstops)inthefollowingincrements:0S,5S,10S,
15S,20S,25Sor30S
NOTE:The“scan”keywillnotfunctionwhena
triggerdelayisactivate
e.Language
ThedefaultlanguageofthemonitorisEnglish.
Alternativelanguageoptionsinclude:Chinese,
French,Deutsch,Italian,Spanish,Portuguese,
RussianDanish,PolishorDutch.
f.SystemSettings
BlueScreen
ON:Bluescreenwhennosignal
OFF:Blackscreenwhennosignal
Auto‐Brightness
ON:CDSsensorwilltestambientlight,ifless
than10lux,screenbrightnesswillautomatically
adjustandthekeybacklightingwillturnon
OFF:CDSsensorwillnotfunctionandkey
backlightingwillnotwork
RulerRefLineMode
ON:Referencelinewillalwaysbedisplayedon
videoimage
TRIG:Referencelinewillonlybedisplayedwhen
triggered
OFF:Referencelinewillneverbedisplayed
Table of contents
Other Dakota Micro Automobile Accessories manuals
