Dakota Micro AgCam User manual

Dakota Micro, Inc.
Page1of16Author:CNR
UsersManual
AgCam®/AGCO
PartNumber:QC‐9(7)M


Contents:Page
1. IncludedComponents....................................................................2
2. StandardFeatures
a. Camera.........................................................................3
b. Monitor.........................................................................3
c. Cables...........................................................................3
3. Installation&Mounting
a. CameraInstallation&Mounting................................4
b. CameraFunctionPlugs...............................................4
c. CableInstallation&Mounting....................................5
d. MonitorInstallation&Mounting................................6‐7
e. TriggerEventOperations............................................8
4. Monitor&RemoteOperation........................................................8‐10
5. StandardMenuSettings.................................................................11‐12
6. Specifications..................................................................................13
7. Warnings.........................................................................................14
8. Warranty.........................................................................................15
9. ContactUs......................................................................................16

Alwaysreadthemanualspriortooperatingthisequipment,&pleasefollowallsafetysignsandprecautions.
SeeDMWebsiteforinstallationtrainingvideosatwww.dakotamicro.com


User Manual DMAC-QC-9M-7M
Page2of16Rev:3/17/14

1. INCLUDEDMONITORKITCOMPONENTS(PERMONITORKIT)

DescriptionPicture
DakotaMicro9”or7”LCDMonitorw/DeutschQuick
connectMonitorwireharness
Creditcardstylemonitorremotew/battery(stylesvary
bykit)

AgCamMonitorWireHarnessforMonitorsequipped
withQuickConnectwireharnesshookup(notriggers)

ACpoweradaptor(stylesvarybykit)

MonitorU‐bracketw/4wingbolts

Monitorsunshield
Cigarettelighter(12v)poweradaptor(stylesvarybykit)

AccessoryCameraKitContents(percamerakit–soldseparately)
DescriptionPicture
AgCam®camera
*NTSC/Silvercamerashown
PALCamerasfeatureblackbody

Camerabracketw/attachedmagneticbase

Cameracomponentbag:Allenwrench,(x2)nylon
washers,(x2)retainingscrews&camerapigtail

60’power/videocable


20’power/videocable


Dakota Micro, Inc.
Page3of16Author:CNR
ThankyouforpurchasingtheAgCam®.TheAgCam®isadurable,reliablesurveillancesystemwiththe
innovativeabilitytobequicklymovedfromoneapplicationtothenext.Trainingvideosareavailableonthe
DakotaMicrowebsiteatwww.dakotamicro.com.

2. STANDARDFEATURES

a. Camera
 Waterproof,shockproof,suitablefornearlyanyuse.
 Minimumfocaldistanceof5”.
 Built‐in,highqualityCCDcamerawithhighperformanceinfrared(IR)illuminatormodules.
 IRhaseffectiverangeof45’+incompletedarkness.
 In‐lineconditionerandsurgesuppressorpreventsover/underpoweringofunit,preventing
damage.
 Built‐inCDSlight‐sourcesensorcanautomaticallyturnon/offtheIR’sbydetectingthelight
intensityoftheenvironment.
 OurexclusivePhotograycamerabodylensdarkensinbrightconditionsandbecomescompletely
transparentunderlowlightconditions.Thislensisalsotransparentofinfraredlight,allowingthe
LED’stopenetrateevenwhenitisdarkened.
 Standardlensfeatures92°fieldofview(3.6mm).
 Optionallensesavailableinclude:6mm,12mm&16mm.(Acompletelensguideisavailableon
ourwebsiteatwww.dakotamicro.com.
 FunctionplugsonEliteAgCam®versionsallowforIRON/OFFandswitchingofForward/Reverse
image.
 Removable/Replaceablecameratail.
b. Monitors
 FeaturesthelatestinLCDtechnology.
 Color,brightness,contrastandvolumecontrolsthatallowcompensationforuseindifferent
environments.
 Selectableaudiovideoinputs.
 Remotecontrol&sunshieldincluded.
c. Cables
 Siliconejacketenableshighflexibilityinalltemperatures.
 Ourdurablepower/videoextensioncablescomein20’and60’standardlengthsandfeature
sturdy,watertightconnectors.

Additionalpower/videocablesavailableinlengthsof10’,30’,40’,50’and80's.

User Manual DMAC-QC-9M-7M
Page4of16Rev:3/17/14

3. INSTALLATION&MOUNTING
SeeDMWebsiteforInstallationTrainingVideos
a. CameraInstallation&Mounting

1. CameraBody
2. *IRFunctionPlug
(EliteOnly)
3. *MIRFunctionPlug
(EliteOnly)
4. RetainingScrew(x3)
5. CameraTailInput
6. Camerabracket
7. FiberWasher(x2)
8. Magnet
9. MagnetNut




b. FunctionPlugs(EliteModelsOnly)
TherearetwofunctionplugsonthebottomofeachEliteDakotaMicrocamera,nearthecamera
tail.Theywilllookliketwoadditionalscrewsataslightanglerecessedintothecamerabody.The
functionplugsutilizeapolarizedmagnettochangecamerafunctionality.
1) IRON/OFF.ThisfunctionplugrequiresamagnettoallowfortheIRLED’stofunctionin
lowlightconditions.Ifyouremovethepolarizedmagnet,theIRLED’swillNOTcomeon.
2) MIR/FOR.Thisfunctionrequiresamagnettoactivate/deactivatethemirror/forward
functionofthecamera.ElitecamerasareshippedfromthefactorywiththeMIRmagnet
installed.

TemporaryMounting:
Fortemporarymounting,itisrecommendedthatyouusethesupplied65#pullmagnet.Ifusing
magneticmount,fastencameracablewithaziptieorotherstylefastener.Thiswillactasa“safety
wire”intheeventyourcameraisknockedlooseforsomereason.Whenselectingalocation,make
surethattheequipmentsurfaceiscleanofallforeignmaterialandasflataspossibletoensurethatthe
magneticcamerabasewillhavegoodcontactandnotvibrateoff.





Dakota Micro, Inc.
Page5of16Author:CNR


PermanentMounting:
Forpermanentmounting,itisrecommendedthatyouremovethemagnetandattachtoanysolid
surfacewithtwo(2)screws.

Aftercameraissecurelymounted,plugpower/videoinputintoAgCam®extensionpower/videocable.Make
suretheyaresecurelyattachedandlocked(¼turnwilllockthecablestogether).

SuggestionsforMountingCamera:
Whendeterminingthelocationforthecameraitisalwaysbesttouseasolidsurfacetominimizevibration.
Laddersarenotgoodmountingchoicesduetolackofstability.

IfyouwillbeusingyourAgCam®forassistinginvisibilityfortowing,youwillwanttopositionthecameraso
youcanseethedesiredareaandaportionofthevehicle/trailerintow;thiswillgiveyousomereferenceto
distance.YouwillalsowanttousethemirroredsettinginthemonitormenuorremovethemagnetintheMIR
functionplugonthecamerasoastoaccuratelyrepresentleftandright.Thiswillgiveyoutheeffectoflooking
inarearviewmirror.

CameraWarnings
 NEVERRELYONYOURAGCAM®ASASAFETYFEATURE.Itisuptoyourdiscretiontokeepyourroad
travelandotheroperationssafe.YourAgCam®willprovideyouwithinformationonlybasedonwhat
itsees.Operationofmachinerysafetyguidelinesstillapply.
 TheAgCam®isequippedwithanarrayofinfraredlightemitterswhichareinvisibletothehumaneye.
Thisfeaturewillaidinlowlightconditionsbuthaslimitations.Theeffectiverangeofthenightvision
featureis1to45+feetandwillproduceamonochromeimageonly.Donotattempttodrive
machineryusingthisfeature.

c. CableInstallation&Mounting
Therearetwo(2)lengthsofcablewithyourcamerasystem:One(1)20’andone(1)60’.Ifyouwouldliketo
purchasedifferentoradditionalcablelengths,pleasecontactyourdealerwhereyoupurchasedyourAgCam®.

CableWarnings
 Cableroutingisimportant.Whereyouchoosetorunthecablesshouldnotinterferewiththenormal
operationofthemachineoranysafetyequipment.
 ALWAYSbeawareofany“pinchpoints”orotherpotentialhazardstothecable.
 Secureallcablestovehicle/equipmentusingcableclips,ziptiesorotherstylefastener.
 IfyouintendtouseyourAgCam®forshortlengthPTOoperatedimplement,avoidexcesscablelengths
ifpossible.Whenyoudecideonalocationyoushouldfixthecameratoapermanentbracketusing¼
inchbolts,andattachanyloosecablesecurelysothereisnochanceofentanglementinthePTOor
othermovingparts.
 IfyouuseyourAgCam®tomonitoracombinehopperorothercombineoperations,takecareto
rememberthatcombineshavemanymovingparts.Useextremecarewhenroutingcables,anditis
stronglyrecommendedthatyouuseboltstosecurethecamera.Whileitwouldbesufficienttousethe
magneticbaseformonitoringpurposesduringroadtravel,itisadvisedtosecurethecamerawithbolts
duringoperationofthecombine.




User Manual DMAC-QC-9M-7M
Page6of16Rev:3/17/14

d. MonitorInstallation&Mounting
Mounting:
Removeyourmonitorcarefullyfrompackaging,andinspectallmountinghardware.Mountinglocationisthe
mostimportantpartofthemonitorinstallationtoensuremaximumvisualbenefitfromyourAgCam®system.
Keepinmind:
 Leastdirectsunlight.Keepingyourmonitoroutofdirectsunlightwillprolongthelifeoftheunitaswell
asensureoptimumvisibility
 Doesnotobstructyourview
 Doesnotinterferewiththenormaloperationofvehicle

WARNING:DakotaMicro,Inc.isnotresponsibleforanydamagescausedtoyourmonitor,or
yourself,duetotheimproperinstallationoruseofasuctioncupmonitormount,whetherit
beproductsoldbyDMorproductpurchasedfromanothersource.

Drymountthemonitortotheincludeduniversalmountingbracketby:
1. HoldingmonitorU‐bracketinplaceonmonitor
2. Attachbracketwithincludedwingbolts



Onceyouhaveattachedthemonitortothemountingbracket,followthesestepstofinalizetheinstallation.
1. Withthemountandmonitorattached,findandmarkthedesiredpositionforthemonitor.
2. Removethemonitorfromthemount.
3. Attachthemonitortothemountandtightenthewingnut.




Dakota Micro, Inc.
Page7of16Author:CNR
Installation:

MonitorWireHarnessDetail:




1) AV1‐VideoInput5)RCA‐VideoOutput(Non‐functional)
2) AV2‐VideoInput6)PowerInput*
3) AV3‐VideoInput7)InputtoMonitor
4) AV4‐VideoInput 

User Manual DMAC-QC-9M-7M
Page8of16Rev:3/17/14



Power:
12vPower:
1. Attachthepowerinputconnector(8above)toyourincluded12vcigarettelighteradaptor**.
2. Plugcigarettelighteradaptorinto12vpowersource.

*Thereisasmallin‐lineglassfuselocatedontheredpowerwire.Whenreplacingblownfuses,useaMAX
2ampglassfuse.

**Thereisasmallglassfuselocatedinsidethetipofthe12vportionofthepoweradaptor.Whenreplacing
blownfuses,useaMAX4ampglassfuse.

HardwirePower(7.5ampmaximumcircuitcapability):
1. ContactyourlocalAgCam®dealerforavailablehardwirepoweradaptors.

e. TriggerEventOperations:
Cameraselection

Eventtriggerwiresareasfollows:
Camera1–Green
Camera2–Purple
Camera3–Gray
Camera4–White

Eventtriggerwirescanbeattachedtoany12vpositiveevent.Thiswillcausethemonitortochangetothat
camera,regardlessofthestateofthemonitor(i.e.ON/OFForchannelselection).Themostrecenteventwill
betheprimarydisplay,soiftwovideochannels(AV1&AV2)areattachedtoaneventoutput,theonethat
happenslastwillchangethemonitortoitsrespectivecameraview.

Thewirescanbeattachedtoanypositiveoutput10.5vto16.9vswitchorsupplytocausethemonitorto
automaticallyswitchtheunittoitsrespectivechannelcamera.Forexample;ifyouweretoattachtheAV1
wiretoapositiveoutputfromanunloadingaugeronacombine,themonitorwouldswitchfromchannel2,3,
or4tochannel1whentheaugerisextended.Theeventcircuitshouldbeneutralinitsnormalstateand
changetoHIGH(+12v)whentheeventisconsideredtobeactive.

4.MONITOR&REMOTEOPERATION

Turnthemonitorononlyafterithasbeensecurelymounted,suppliedwithpower,andthecamerasare
connected.(9”Monitorshown.Actualbuttonlocationson7”monitormayvaryslightly):

Dakota Micro, Inc.
Page9of16Author:CNR







1OutputJackHeadphoneJack
2‐4FORUSEONLYWITHQuadProcessor
2FullScreenWhenconnectedtoDMQuad,willshowcameras1/2/3/4eachtimepressed
3DuplexScreenWhenconnectedtoDMQuadwillshowcameras1/4andcameras2/3eachtime
pressed
4QuadScreenWhenconnectedtoDMQuadwilldisplayall4camerasconnected
5‐KeyTodecreaseparameter
6+KeyToincreaseparameter
7MENUToswitchmenuselection,pressmultipletimes.Togotonexticon,use+
8AVKeySwitchesbetweenAV1,AV2,AV3,&AV4
9POWERTurnsmonitorON/OFF
11‐12portslocatedonsidesandbottomofmonitor
10USBPortInputforoptionalcablewhenusingacomputerconnectedtotheVGAport
(duplicatesimagefrominputdevice,cablenotavailablefromDM)
11QuadPlugUSBfemaleconnectorforQuadprocessor
12VGAInputInputforVGAfromcomputerorotherconsole(duplicatesimagefrominput
device,cablenotavailablefromDM)

User Manual DMAC-QC-9M-7M
Page10of16Rev:3/17/14

Remote


POWERON/OFF
MuteEnable/Disablesound
FlipimageLeft/Right
FlipimageUp/Down
NavigationArrows

MENUEntersthemenu
Alsoactsas“enter”buttonin
menusettings
Adjustsscreendisplaymodes
Resetyourselection
Enablestimerthatwillturnoff
monitor
Superimposeagridonscreen
AspectRatioadjustment
A/Vswitching(cameraselection)
GettingStarted:
1. Poweronmonitorbypushing“POWER”buttononthefaceofmonitororremote.
2. Ifyoudonotseevideofromyourcamera,pushtheAVbuttononmonitororSELbuttononremote.
RepeatedlypushingtheAVorSELbuttonwillcyclethroughthevideochannels.

5.STANDARDMENUSETTINGS
PresstheMENUkeyonthemonitororremote.Usethe–and+keysonthemonitorortheleftandright
arrowkeysontheremotetomovethroughtheiconsatthetopofthescreen.
1. UsetheMENUkeyonthemonitor(upanddownarrowsonremote)toselectanitemundereach
section.Selectedmenuitemsturnred.
2. Use–or+onthemonitor(leftandrightarrowsonremote)tochangethevalueofthehighlighted
item.
3. Toexit:

Dakota Micro, Inc.
Page11of16Author:CNR
a. Pressthe–or+keyonthemonitor(leftorrightarrowonremote)multipletimestillthemenu
goesaway
b. Allowmonitortotimeout(approximately5seconds).


PICTURE

BRIGHT:Adjuststhebrightnessoftheimage
CONTRAST:Adjuststhecontrastoftheimage
COLOR:Adjuststhecoloroftheimage
TINT:Adjusttintofimage(appearsonlywhencamera
ispluggedin)
RESET:Returnssettingstodefault


VOLUME

VOLUME:Adjuststhevolumelevel

OPTION

CAMERA1:AV1eventtriggerdelaytime
CAMERA2:AV2eventtriggerdelaytime
CAMERA3:AV3eventtriggerdelaytime
CAMERA4:AV4eventtriggerdelaytime
ROTATE:Invertimageonscreen




User Manual DMAC-QC-9M-7M
Page12of16Rev:3/17/14

SYSTEM

LANG:Selectyourlanguage(Englishdefault)
SOURCE:AdjuststheAVinputsource(AV1default)
GUIDELINES:Superimposesagridonyourmonitor
screen(selectONorOFF)

PRESET


SLEEP:Enablessleeptimerdelaysetting(inminutes)
AV1:Enable(ON)orDisable(OFF)AV1
AV2:Enable(ON)orDisable(OFF)AV2
AV3:Enable(ON)orDisable(OFF)AV3
AV4:Enable(ON)orDisable(OFF)AV4
VGA:Enable(ON)orDisable(OFF)VGAinput

Dakota Micro, Inc.
Page13of16Author:CNR
6.SPECIFICATIONS

A.Camera:
EffectivePictureElements510*492
ImagePick‐upDeviceSONY1/3”SuperHADCCDsensor
HorizontalResolution540Horizontallines
MinimumIllumination0LUX@F2.0
S/NRationMorethan48dB
AutoElectronicShutter1/60s~1/100,000s,ON/OFFSwitch‐able
AutoWhiteBalanceColorTemperature:2500K~9500K
AutoGainControlHigh/LowSwitch‐able
AutoIrisControlVideo‐DriveIrisControl
ScanningSystemInterlace2:1
GammaCharacteristic0.45
LensesFurnishedBoardLens3.6mm/F2.0,PhotograyBody
SynchronousSystemInternal,Negativesync.
BackLightCompensationOn/OffSwitch‐able
VideoOutput1Vp‐p/75Ohms.
OperatingTemp.‐45°F~150°F(‐42°C~66°C)
ConstructionAluminumCase
WaterproofingcriteriaIP68/69
Dimensions53x58(L)mm(BodyOnly)
B.LCDMonitor:
ScreenSize9”(16:9)digitalpanel/7”(16:9)digitalpanel
OverallSize235(L)X155(W)X36.5(H)mm
Weight600g
PowerinputAC10.5‐16.9V,1,200ma(2cameras)
ColorSystemNTSC/PALautoswitch
OperatingTemp.‐30°F~130°F(‐34°C~+54°C)
TouchPanel4‐Wireresistance(optionalfunction)
Brightness400cd/m2
Resolution(HxV)800(RGB)x480
Contrast500:1
ViewingAngleL/R:70°Up:70°Down:60°
OperatingVoltageMin.12v(Checkmonitorlabelforspecificvoltagerange)












User Manual DMAC-QC-9M-7M
Page14of16Rev:3/17/14

7.WARNINGS

1) Toavoidelectricalshockandmaintainoptimalfunctionality,donotopentheenclosures.Highvoltage
maybepresentandtherearenouserserviceablepartsinside.Allwarrantieswillbevoidshouldany
enclosuresbetamperedwithinanyway.

2) Donotuseanyharshchemicalsolvents,cleaningagentsorcorrosivedetergenttocleanawaydirton
thesurfaceofthescreenorlens.

3) Ourphoto‐chromiccameralenseshavebeenmadeimpact‐resistantandhavebeendrop‐balltested
accordingtoSec.3.84,21CRFBUTARENOTUNBREAKABLE.Becausetheyhavebeenhardened
chemically,theyshownostresspattern.Inspectyourlensesfrequently.Chippedorscratchedsurfaces
willreduceprotection.Suchlensesshouldbereplacedonlybythemanufacturer.

4) Thiscamerausesaspecialcoatedopticlenswithphotochromaticproperties;ifthelensneedstobe
replacedwerequirethatitbereturnedtothefactory.

5) Powertocamerasisnotinterruptedbyturningoffmonitor;12vpowersourcemustbeterminated
whennotinusetoavoidbatterydrain.Toavoidthisproblembesurewhenhardwiringaunit,usea
fusedcircuit.

6) DonotuseyourDakotaMicrocamerasystemforanythingotherthanlegalsurveillanceand
observationuses.DakotaMicro,Inc.isnotliableforanyillegalornefarioususage.

Dakota Micro, Inc.
Page15of16Author:CNR
8.CONSUMERLIMITEDWARRANTY
LIMITEDWARRANTY
Subjecttothedisclaimer,limitationsandotherdirectionsstatedhereafter,DakotaMicro,Inc.warrantsthatthe
Productwillbefreefromdefectsinmaterialandworkmanshipforperiodsasstatedhereafterfromthedateof
originalpurchase.THISWARRANTYISEXPRESSLYMADEINLIEUOFANYANDALLOTHERWARRANTIES,EXPRESS
ORIMPLIED,INCLUDINGTHEIMPLIEDWARRANTIESOFMERCHANTABILITYORFITNESS.THEEXCLUSIVEREMEDY
OFTHEBUYERISLIMITEDTOREPAIRORREPLACEMENTOFTHEPRODUCT.EXCEPTASSTATEDINTHIS
WARRANTY,DAKOTAMICROSHALLNOTBELIABLEFORANYLOSS,INCONVENIENCE,ORDAMAGE,INCLUDING
DIRECT,SPECIAL,INCIDENTAL,ORCONSEQUENTIALDAMAGES,RESULTINGFROMTHEUSEORINABILITYTOUSE
THEPRODUCT,WHETHERRESULTINGFROMBREACHOFWARRANTY,NEGLIGENCE,STRICTLIABILITYOFANY
OTHERLEGALTHEORY.Anyoralstatementsorrepresentationsmadebyanyonewhicharecontrarytoorat
variancewiththetermsstatedinthisLIMITEDWARRANTYarevoid.

DakotaMicrowill,atitsoption,eitherrepairthedefectorreplacethedefectiveProductorpartthereofwithanew
orremanufacturedequivalentatnochargetothepurchaserforpartsorlaborfortheperiodofthree(3)yearsfor
AgCam®/EnduraCam®cameras,two(2)yearsforAgCam®/EnduraCam®monitors,quadsandWirelessRanchHands,
EighteenMonths(18)forallOverviewCameras&Monitorsandone(1)yearforMiniDVR,cablesandallother
accessories.
TheDakotaMicrolimitedwarrantyperiodsoutlinedaboveapplythroughouttheUnitedStatesandCanadaonly.A
one(1)yearmaximumlimitedwarrantyforallProductsappliestoallothergeographiclocationsunlessotherwise
statedinwritingbyDakotaMicro.
Thislimitedwarrantydoesnotapplytoanyissuesconnectedwithappearancethathavenorelationtothe
performanceoftheProductnortoanyProducttheexteriorofwhichhasbeendamagedordefaced,whichhasbeen
subjectedtoimpropervoltageorothermisuse,abnormalserviceorhandling,orwhichhasbeenalteredormodified
indesignorconstruction.
Inordertoenforcetherightsunderthislimitedwarranty,thepurchasershouldfollowthestepssetforthinthe
completeDakotaMicro“Warranty&RepairPolicy”listedatwww.dakotamicro.com,andprovideproofofpurchase
toDakotaMicro.
NeitherthesalespersonnelofDakotaMicronoranydealeroranyotherpersonisauthorizedtomakeany
warrantiesotherthanthosedescribedherein,ortoextendthedurationofanywarrantiesbeyondthetimeperiods
describedherein.
ThewarrantiesdescribedhereinshallbethesoleandexclusivewarrantiesandremediesprovidedbyDakotaMicro.
Correctionofdefects,inthemannerandfortheperiodoftimedescribedherein,shallconstitutecomplete
fulfillmentofallliabilitiesandresponsibilitiesofDakotaMicrotothepurchaserwithrespecttotheProduct,and
shallconstitutefullsatisfactionofallclaims.InnoeventshallDakotaMicrobeliableorinanywayresponsiblefor
anydamagesordefectsintheProductwhichwerecausedbyrepairsorattemptedrepairsperformedbyanyone
otherthanDakotaMicro.
Somestatesdonotallowthelimitationorexclusionofincidentalorconsequentialdamages,sosaidlimitationmay
notapplytoyou.
Anyactionatlaw,suitinequity,orotherjudicialproceedingfortheenforcementofanyrightprovidedforhereinor
otherwise,orwithrespecttoanyclaimthatapurchasermayhaveagainstDakotaMicroshallbeinstitutedonlyin
theCourtsoftheStateofNorthDakota,eitherinthestatedistrictcourtlocatedinWahpeton,NorthDakotaorin
FederalDistrictCourtlocationinFargo,NorthDakota.Withoutregardtoconflictsoflawprinciples,thelawsofthe
stateofNorthDakotashallgoverntheinterpretationandenforcementofthetermsofthisLimitedWarrantyandall
aspectsoftherelationshipbetweenDakotaMicroandthepurchaser.
Thiswarrantygivesyouspecificlegalrightsandyoumayalsohaveotherrights,whichmayvaryfromstatetostate.

User Manual DMAC-QC-9M-7M
Page16of16Rev:3/17/14

9.CONTACTUS



Dakota Micro Inc. products, specifications, pricing and programs are subject to change without prior
notice. Dakota Micro Inc. reserves the right to make design changes at any time without obligation to
retroactively install them on previously sold units.
Dakota Micro, Inc.
1 866 462-4226
www.dakotamicro.com
8659 148th Ave. SE
Cayuga, ND 58013