Daktronics ProPixel PSX-5102-62MN-10 User manual

PSX-5102-62MN-10 ProPixel Quick Guide 1 of 5
DD1840322 Rev 8
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®
Exterior View of PSX-62 at 65% Transparency
SPECIFICATIONS
Model number
LED technology
Pixel configuration
Pixels/element
Native full-color line spacing
Native full-color column spacing
Element Length
Element width
Element depth with louvers
PSX-5102-62MN-10
Through-hole LEDs
4 red, 3 green, 3 blue LEDs
8
62.50 mm (2.461”)
62.50 mm (2.461”)
500 mm (19.70”)
31 mm (1.22”)
65 mm (2.56”)
Horizontal viewing angle (matrix)
Vertical viewing angle
LED lifetime
Intensity/pixel
Intensity/element
Power/element (1)
Color processing
Dimming control
Operating temperature
140o(70ooff center) min.
50o(25ooff center) min.
75,000 hours (half brightness)
19.50 candelas
156 candelas
2 watts avg, 8 watts max
10-bit (1.07 billion colors)
5-bit (32 levels)
-34oto 49oC (-30oto 120oF)
Element weight (no mounting) 0.625 kg (1.375 lbs)
Vertical viewing angle (matrix) 70o(35ooff center)
Service access
Environmental rating
Front or rear
IP 67
Element depth 52 mm (2.05”)
Horizontal viewing angle 110o(55ooff center) min.

PSX-5102-62MN-10 ProPixel Quick Guide 2 of 5
DD1840322 Rev 8
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®

PSX-5102-62MN-10 ProPixel Quick Guide 3 of 5
DD1840322 Rev 8
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®
Tuck the cable into the element between
the bolt and the end of the element. Make
sure the loop does not go around the
mounting bolt.
CABLES STOWED IN ELEMENT
Connect the cables and stow them in
the element. Then attach them to the
mounting bracket.
Press the male and female ends together
and twist clockwise until connector clicks
into place.
CABLES STOWED IN MOUNTING BRACKET
The different styles of mounting brackets
each have their own space under the
element to run cables.
Press the male and female ends together
and twist clockwise until connector clicks
into place.
Pass the cables through the holes in the
mounting bracket and connect the cables.
Then stow the cables in the bracket.

PSX-5102-62MN-10 ProPixel Quick Guide 4 of 5
DD1840322 Rev 8
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®
See-Through DisplaysBrightness and Transparency
Brightness
(Nits)
Transparency
Percentage
Element to Element
Spacing
6000 40% 52 mm (2.05 in)
5000 50% 62.5 mm (3.46 in)
4000 60% 78 mm (3.10 in)
3000 70% 104 mm (4.10 in)

PSX-5102-62MN-10 ProPixel Quick Guide 5 of 5
DD1840322 Rev 8
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®