Daktronics ProPixel PSX-5901-125MN-3 User manual

PSX-5901-125MN-3 ProPixel®Quick Guide 1 of 5
DD2024046 Rev 4
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®
SPECIFICATIONS
Model number
LED technology
Pixel configuration
Pixels/element
Native full-color line spacing
Element Length
Element width
PSX-5901-125MN-3
Through-hole LEDs
1 red, 1 green, 1 blue LED
2
125 mm (4.92”)
235 mm (9.25”)
23.5 mm (.925”)
Horizontal viewing angle (matrix)
Vertical viewing angle
LED lifetime
Intensity/pixel
Power/pixel
Color processing
Dimming control
Operating temperature
140o(70ooff center)
50o(25ooff center) min.
75,000 hours (half brightness)
6.80 candelas
0.15 watts avg, 0.6 watts max
12-bit (68 billion colors)
6-bit (128 levels)
-34oto 49oC (-30oto 120oF)26.5 mm (1.04”)
Element depth without louvers
Element weight (no mounting) 0.57 kg/string of 4 (1.25 lbs)
Vertical viewing angle (matrix) 70o(35ooff center)
Service access
Environmental rating
Front or rear
IP 67
Horizontal viewing angle 110o(55ooff center) min.

PSX-5901-125MN-3 ProPixel®Quick Guide 2 of 5
DD2024046 Rev 4
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®

PSX-5901-125MN-3 ProPixel®Quick Guide 3 of 5
DD2024046 Rev 4
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®
Specialized Mounting Options
With the proper brackets, the PSX-125MN-3 can be mounted in concave and convex orientations.
Brackets can be shaped to the desired orientation.
Concave
When working with a concave application, brackets can achieve a maximum bend radius of
950 mm.
Convex
Brackets are capable of tting most convex curves. The brackets can achieve a greater bend
radius than shown below, but it is not recommended. If an application calls for a greater radius,
individual elements can be used.

PSX-5901-125MN-3 ProPixel®Quick Guide 4 of 5
DD2024046 Rev 4
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®
Tuck the cable into the element between
the bolt and the end of the element. Make
sure the loop does not go around the
mounting bolt.
CABLES STOWED IN ELEMENT
Connect the cables and stow them in
the element. Then attach them to the
mounting bracket.
Press the male and female ends together
and twist clockwise until connector clicks
into place.
CABLES STOWED IN MOUNTING BRACKET
The different styles of mounting brackets
each have their own space under the
element to run cables.
Press the male and female ends together
and twist clockwise until connector clicks
into place.
Pass the cables through the holes in the
mounting bracket and connect the cables.
Then stow the cables in the bracket.

PSX-5901-125MN-3 ProPixel®Quick Guide 5 of 5
DD2024046 Rev 4
25 July 2012
PO Box 5128 201 Daktronics Dr. Brookings, SD 57006-5128
tel [phone] or 800-325-8766 Fax [phone]
www.Daktronics.com
Daktronics
®