Danby Premiere DPAC 13009 Assembly instructions

Owner’s Use and Care Guide
Guide d’utilisation et soins de Propriètaire
Guía a utilizar y a cuidar
Model • Modèle
DPAC 13009
PORTABLE AIR CONDITIONER
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
CLIMATISEUR PORTATIF
Table des matières . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Danby Products Ltd, PO Box 1778, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc, PO Box 669, Findlay, Ohio USA 45839-0669
Version 2.12.08 JF
CAUTION: Read and follow all safety rules and operating instructions before first use
of this product.
MISE EN GARDE : Veuillez lire attentivement les consignes de sécurité et les directives
d'utilisation avant l'utilisation initiale de ce produit.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE: If the Dehumidifier changes ownership,
be sure this manual accompanies the unit.
CONSERVER CES INSTRUCTIONS POUR CONSULTATION ULTÉRIEURE: En cas de revente du
déshumidificateur, ce manuel doit être inclus avec l’appareil.

UNIT SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
PART IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
IMPORTANT SAFETY INFORMATION
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
OPERATING INSTRUCTIONS
Internal Safety Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Draining Excess Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Window Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Auto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dehumidifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Auto Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TABLE OF CONTENTS
1

Thank you for choosing a Danby appliance to provide you and your family with all of
the “Home Comfort” requirements of your home, cottage, or office. This Owner’s Use
and Care Guide will provide you with valuable information necessary for the proper
care and maintenance of your new appliance. If properly maintained, your Danby
appliance will give you many years of trouble free operation. Please take a few
moments to read the instructions thoroughly and familiarize yourself with all of the
operational aspects of this appliance.
Your Danby Portable Air-Conditioner is a multi-functional room air-exchanging,
air-processing appliance, designed to offer you the functions of; Air Conditioning,
Dehumidifying, and Independent Fan. Each individual mode is featured with
“oscillating” air swing capabilities. This unit can be conveniently moved from room to
room within your home and set up in just minutes. Imagine the convenience of 4
Season Home Comfort at your fingertips, anywhere, anytime.
For easy reference, may we suggest you attach a copy of your sales slip/receipt to this
page, along with the following information, located on the manufacturers nameplate on
the rear panel of the unit.
Model Number:
Serial Number:
Date of Purchase:
This information will be necessary if your unit requires servicing and/or for
general inquiries. To contact a Customer Service Representative, call Danby
TOLL FREE: 1-800-26- (1-
800-263-2629)
Description of Product Air Conditioner
Model DPAC13009
Voltage/Frequency 115V-60Hz
Input Power 1320W
Operating Cycle 11.5A
Cooling Capacity 13000BTU
Dehumidifying Capacity 4.25L/Hour
Refrigerant R-410A
Timer 12 hour
Dimensions (W) x (H) x (D) 50.8 cm x 91.5 cm x 41.8 cm
Weight 38 kg
NOTE: Continuing research results in steady improvement. Therefore, this information
and these specifications are subject to change without notice.
TABLE OF CONTENTS
UNIT SPECIFICATIONS
2

Remote Control
Air Outlet
Emergency
On/Off
Switch
Evaporator Air
Intake
Evaporator
Air Intake
Cable Hook
Drainage Pipe
Power Supply
Continuous drain hole (for Cooling/
Heating unit only)
READ ALL SAFETY INFORMATION BEFORE USING
1) All wiring must comply with local and national
electrical codes and be installed by a qualified
electrician. If you have any questions regarding
the following instructions, contact a qualified
electrician.
2) Check available power supply and resolve any
wiring problems BEFOREinstallation and
operation of this unit.
3) This appliance draws 11.5 nameplate amps
under Cooling Mode and may be used in any
properly wired, general purpose 15 amp
household grounded receptacle.
4) For your safety and protection, this unit is
grounded through the power cord plug when
plugged into a matching wall outlet. If you are not
sure whether the wall outlets in your home are
properly grounded, please consult a qualified
electrician. DO NOT USE PLUG ADAPTERS OR
EXTENSION CORDS WITH THIS UNIT. If it is
necessary to use an extension cord with this unit,
use an approved “air conditioner” extension cord
only (available at most local hardware stores).
5) The manufacturers nameplate is located on the
rear panel of the unit, and contains electrical and
other technical data specific to this unit.
6) To avoid the possibility of personal injury,
always disconnect the power supply to the unit
before installing and/or servicing.
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps *AWG Wire Size
11.5 14
AWG- American Wire Gauge
*Based on copper wire at 105°C temperature rating.
TABLE 2
Receptacle and Fuse Types
Rated Volts 125
Amps 15
Wall Outlet
Fuse Size 15
Time Delay Fuse Plug Type
(or Circuit Breaker)
PART IDENTIFICATION
IMPORTANT SAFETY INFORMATION
ELECTRICAL
SPECIFICATIONS
CAUTION: Do not leave this unit
unattended in a space where people or
animals cannot react to a failed unit are
located. A failed unit can cause extreme
overheating or death in such an
enclosed, unattended space.
3

The power cord supplied with this air conditioner contains a device
that senses damage to the power cord. To test if your power cord is
working properly, you must do the following:
Your Danby appliance is designed to be highly efficient in energy
savings. Follow these recommendations for greater efficiency.
1) Select a thermostat setting that suits your
comfort needs and leave at that chosen
setting.
2) The air filter is very efficient in removing
airborne particles. Keep the air filter clean at all
times.
3) Use drapes, curtains or shades to keep
direct sunlight from penetrating and heating
room, but do not allow drapes or curtains to
obstruct the air flow around the unit.
4) Start your air conditioner before the
outdoor air becomes hot and uncomfortable, to
avoid an initial period of discomfort while the
unit is cooling off the room. Use of the
automatic start/stop programmable TIMER
feature can be a major asset in this regard if
utilized to the fullest extent.
5) When outdoor temperatures are cool
enough, turn the air conditioner off and use the
FAN MODE on HIGH, MED, or LOW. This
circulates indoor air, providing some cooling
comfort while utilizing less electricity.
NOTE: The power cord supplied with this air
conditioner contains a current leakage detection
device designed to reduce the risk of fire. In the
event the power supply cord is damaged, it cannot
be repaired and must be replaced with a new cord
from the product manufacturer.
• Under no circumstances should this device be
used to turn the unit on or off.
• The “RESET” button must always be pushed in
(engaged) for correct operation.
• The power supply cord must be replaced if it fails
to reset when the “TEST” button is pushed in.
1) Connect the power supply cord to an
electrical outlet.
2) The power supply cord has two buttons
located on the head of the plug. One button is
marked “TEST”, and the other is marked
“RESET”. Press the “TEST” button; you will
hear a click as the “RESET” button pops out.
3) Press the “RESET” button; you will hear a
click as the button engages.
4) The power supply cord is now energized
and supplying electricity to the air conditioner
(on some products this is also indicated by a
light on the plug head).
CAUTION: During air conditioning and
dehumidifier mode, if the compressor cycle is
interrupted (water full condition, unplugged,
power failure, etc.) and reinstated immediately
thereafter (within 3-5 minutes), a compressor
protection circuit is automatically activated. The
compressor cannot operate during compressor
protection mode (this is normal). It may take 3-5
minutes before the protection circuit
self-deactivates.
DO NOT ATTEMPT TO START THE UNIT
(COMPRESSOR) DURING THIS PERIOD.
This unit is equipped with a fail-safe switch
mechanism that prevents the unit from
condensing water in the event the internal
reservoir becomes full or is accidentally
displaced. If this situation occurs, the (RED)
WATER FULL indicator light will illuminate.
This condition will remain steady until the
external water tank is emptied.
NOTE: No cooling will occur until the internal
tank is emptied and/or re-positioned. It may
take several minutes before the compressor
resumes normal operation.
IMPORTANT SAFETY INFORMATION
POWER SUPPLY
CORD
ENERGY-SAVING
TIPS
INTERNAL SAFETY
FEATURE
4

1) Drain excess water from the tank by placing a pan under the
drain water outlet. (Fig. 1)
2) Remove the drain plug and let the water drain into the pan.
3) When the water stops draining out, replace the drain plug, and
put the tube back in with the clip pointing up.
4) Remove the pan of water.
5) Operate the unit in Fan mode to dry the interior of the unit.
ELECTRIC SHOCK HAZARD: To avoid the
possibility of personal injury, disconnect power to
the unit before installing or servicing.
Caution: To avoid installation/operation
difficulties, read these instructions thoroughly.
LOCATION
Use this portable air conditioner on a level
surface only, as inclinations greater than 3° can
cause water overflow.
Fig. 2
Flexible Exhaust Hose (13cm) & Exhaust nozzle
connector (2 pcs)... from 17 7/10 (45cm) up to 53
1/6” (135cm)
Adjustable window door slider kit (3 pcs).....
from 28 1/3”(72cm) up to 80” (203cm)
Fixture..... (2 pcs)
Screws...(8 pcs)
NOTE: The exhaust/window kit must be
installed at all times when the unit is operating
under AIR CONDITIONING mode.
Instructions for assembling the window
adapter kit (Fig. 3).
a) Insert tube adapters through the back of the
window panel.
b) Secure each tube adapter with four screws
through the front of the window panel.
c) Insert window panel extensions into window
panel. Lightly tighten the screws in the window
panel to hold the extensions in place.
INSTALLATION ACCESSORIES
Fig. 1
Fig. 3
There should be at least 11.8” (30cm)
clearance between the unit and any other
objects or building structures, and should be
installed on a level surface. The unit does
not have to be vented outside during
Dehumidifying or Fan Only mode operation.
Flexible Exhaust Hose
Exhaust Nozzle
Connector
Fixture
Screws
Adjustable Window Slider Kit:
28 1/3” (72cm)- 80” (203cm)
Back of
Window Panel
Tube Adapters
OPERATING INSTRUCTIONS
DRAINING
EXCESS WATER
INSTALLATION
5

Air Conditioning Mode ONLY
Your window kit has been designed to fit most standard “vertical”/”horizontal” windows
up to a maximum height of 80” (203cm). For vertical window applications, multi lock
positions are provided on the edge of each slider section to secure each sliding
section together.
1) Select a suitable location, making sure you have access to an electrical outlet.
2) Install the flexible hose to the rear side of the unit. Insert the hose collar on top of
the exhaust opening and twist to lock into position.
3) Install the adjustable Window Slider Kit as required (see Fig. 4a & 4b).
4) Install the opposite end of the flexible exhaust hose into the window exhaust
adapter.
5) Install the window exhaust adapter into the opening in the slider section, making
sure the window slider sections are secure.
6) Plug the unit into a 115V/60Hz grounded electrical outlet.
HORIZONTAL
Window Slider Kit:
Min.: 26 5/8” (67.5cm)
Max.: 80” (203cm)
VERTICAL
Window Slider Kit:
Min.: 26 5/8”
(67.5cm)
Max.: 80” (203cm)
Fig. 4a Fig. 4b
INSTALLATION
WINDOW KIT
INSTALLATION
6

Key Pad Functions:
Power Switch: Turn unit ON/OFF
FAN: Select from four (4) fan settings: Auto, High,
Medium, and Low.
MODE: Allows you to scroll through and select the
desired operating mode.
CLOCK
AUTO-TIMER
Fahrenheit/Celsius Selector: Press °F/°C selector to
switch to °F/°C setting. Initial setting is °C.
UP
DOWN
Automatic
Cooling Mode
Dehumidify Mode
Fan Only Mode
HIGH Fan Speed
MEDIUM Fan Speed
LOW Fan Speed
The remote operates within a range of 8 meters (26ft.) from the receiver located inside the main
unit. Any obstruction between the receiver and remote may cause signal interference, limiting the
ability to program the main unit.
This Class B digital apparatus complies with Canadian ICES-003
a) This switch is used when unit needs
temporary turning on/off.
b) When pressed, unit starts
running. The running mode and fan
speed mode are set at auto.
c) Press emergency button again until
unit stops running.
Launch Indicator
Clock Indicator
TIMER setting Indicator
TIMER ON/OFF
SETTING TEMPERATURE
Indicator
°F/°C Indicator
Running Indicator
FAN SPEED Indicator
Red/Green Indicator
Blue Indicator
Red/Green Indicator
Blue Indicator
Blue Indicator
Blue Indicator
Blue Indicator
Red/Green Indicator
Red/Green Indicator
Emergency Switch
OPERATION- Features of the Control Panel
REMOTE CONTROL
LCD DISPLAY
EMERGENCY
ON / OFF SWITCH
7

IMPORTANT: The exhaust hose must be properly vented (outdoors)
during air conditioning mode.
1) Press the POWER SWITCH key (Fig. A) to switch on the unit,
and the previous set temperature will be shown in the temperature
display area of the control panel.
2) Press the MODE key (Fig. B) until the COOL indicator light
illuminates on the control panel (Fig.C). Each depression of the
MODE key will advance to a different mode setting (Cool-
Dehumidifier-Fan-Auto)
3) Press the appropriate (UP) or (DOWN) buttons (Fig. D1
& D2) to select a suitable operating temperature setting.
Temperature settings are adjustable between 18°C (64°F) to 32°C
(89°F).
4) Press the FAN key (Fig. E) to select the desired fan speed
setting (Auto-High-Med.-Low). Your selection will appear on the
control panel (each depression of the fan key will advance to a
different setting).
5) When the cooling mode is activated, the transparent ring around
the button on the front of the device (Fig. G) emits a BLUE light.
• Cooling stops automatically when the set temperature is achieved.
Cooling resumes when the room temp. rises above the “set”
temperature level.
Fig. F Fig. G
Cooling Mode (blue)
Auto
High
Med.
Low
OPERATING INSTRUCTIONS
AIR CONDITIONING Fig. A
Fig. B
Fig. C
Fig. D1 Fig. D2
Fig. E
Heating mode (red)
With unit running in AUTO mode (Fig. V), the machine will operate
according to the ambient temperature, and will change its
operational type and fan speed automatically:
Cooling Mode: When temperature is above 25°C (77°F)
Dehumidifier Mode: When temperature is between 18°C (64°F)
and 25°C (77°F).
1) After setting mode to AUTO, the unit will test the environmental
temperature during the first 3 seconds. Then it will decide which
mode to automatically operate in.
2) Fan speed will change automatically according to ambient
temperature.
Fig. U
AUTO
8

Note: During dehumidifier mode, the exhaust hose
does not have to be vented outdoors.
1) Press the ON/OFF key pad to switch the
unit on (Fig. H)
2) Press the MODE key (Fig. I) until the
DRY indicator illuminates on the control
panel (Fig. J). Each press of the MODE key
will advance to a different mode setting
(Cool-Dehumidifier-Fan-Auto).
3) When the dehumidifier mode is
activated, the transparent ring around the
button on the front of the device (Fig. K)
emits an ORANGE light.
NOTE: During Fan Mode, the exhaust hose does
not have to be vented outdoors.
1) Press the ON/OFF key pad to switch the unit on (Fig. H).
2) Press the MODE key (Fig. I) until the FAN indicator illuminates on
the control panel (Fig. L). Each press of the MODE key will advance
to a different mode setting (Cool-Dehumidifier-Fan-Auto).
3) Press the FAN Key (Fig. M) to select the desired FAN SPEED
setting. Your selection will appear on the control panel. Each press
of the fan key will advance to a different fan speed (High- Med- Low)
as shown in Fig. N.
4) When the fan mode is activated, the transparent ring around the
button on the front of the device (Fig. O) emits a GREEN light.
Dehumidifier mode (orange)
High
Med.
Low Fan mode (green)
OPERATING INSTRUCTIONS (cont’d)
DEHUMIDIFIER
FAN
Fig. H Fig. I
Fig. J Fig. K
IMPORTANT: There is no fan speed or
temperature adjustment during
dehumidifier mode. The fan speed is
factory set for Auto and the dehumidifier
operates continuously (non-stop)
regardless of ambient humidity level or set
temperature.
Fig. L
Fig. M
Fig. O
Fig. N
IMPORTANT: the drain
hose must be installed
during dehumidifier mode
9