Danby Premiere DPAC 9009 Assembly instructions

Owner’s Use and Care Guide
Guide de soin d’utiliser-et
Guía a utilizar y a cuidar
Model • Modèle
DPAC 9009
CAUTION: Read and follow all safety rules and operating instructions before first use
of this product.
MISE EN GARDE : Veuillez lire attentivement les consignes de sécurité et les directives
d'utilisation avant l'utilisation initiale de ce produit.
PORTABLE AIR CONDITIONER
Table of contents . . . . . . . . . . . . . . . . . . . . . . 1
CLIMATISEUR PORTATIF
Table des matières . . . . . . . . . . . . . . . . . . . . 13
Danby Products Ltd, PO Box 1778, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc, PO Box 669, Findlay, Ohio USA 45839-0669
Version 1.10.08 JF
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE: If the Dehumidifier changes
ownership, be sure this manual accompanies the unit.
CONSERVER CES INSTRUCTIONS POUR CONSULTATION ULTÉRIEURE: En cas de revente
du déshumidificateur, ce manuel doit être inclus avec l’appareil.

TABLE OF CONTENTS
UNIT SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PART IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFETY INFORMATION
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Window Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION
Features of the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dehumidifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Auto Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . 10
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1

WELCOME
Thank you for choosing a Danby appliance to provide you and your family with
all of the “Home Comfort” requirements of your home, cottage, or office. This
Owner’s Use and Care Guide will provide you with valuable information
necessary for the proper care and maintenance of your new appliance. If
properly maintained, your Danby appliance will give you many years of trouble
free operation. Please take a few moments to read the instructions thoroughly
and familiarize yourself with all of the operational aspects of this appliance.
Your Danby Portable Air-Conditioner is a multi-functional room air-exchanging,
air-processing appliance, designed to offer you the functions of; Air
Conditioning, Dehumidifying, and Independent Fan. Each individual mode is
featured with “oscillating” air swing capabilities. This unit can be conveniently
moved from room to room within your home and set up in just minutes. Imagine
the convenience of 4 Season Home Comfort at your fingertips, anywhere,
anytime.
For easy reference, may we suggest you attach a copy of your sales slip/receipt
to this page, along with the following information, located on the manufacturers
nameplate on the rear panel of the unit.
Model Number:
Serial Number:
Date of Purchase:
This information will be necessary if your unit requires servicing and/or for
general inquiries. To contact a Customer Service Representative, call Danby
TOLL FREE: 1-800-26-
(1-800-263-2629)
2
Model Number DPAC9009
Voltage/Frequency 115V-60Hz
Noise Level 48.5 dB
Fan Speeds 3
Cooling Capacity 9000BTU
Refrigerant R410A
Unit Weight 27.2 kg (60lbs)
Airflow CFM High/Med./Low 342 / 318 / 288
Dimensions (W) x (D) x (H)(inches) 17.2”x 15.3”x 30.5”
Dimensions (W) x (D) x (H) (mm) 475 / 460 / 870
Remote Control Yes
Time of Day Clock No
Auto-Timer Yes
UNIT SPECIFICATIONS
NOTE: Continuing research results in steady improvement. Therefore, this information
and these specifications are subject to change without notice.

PART IDENTIFICATION
IMPORTANT SAFETY INFORMATION
READ ALL SAFETY INFORMATION BEFORE USING
1) Check available power supply and
resolve any wiring problems BEFORE
installation and operation of this unit. All
wiring must comply with local and national
electrical codes and be installed by a
qualified electrician. If you have any
questions regarding the following
instructions, contact a qualified electrician.
2) This appliance draws 10 nameplate amps
under Cooling Mode and may be used in
any properly wired, general purpose 13 amp
household grounded receptacle.
3) For your safety and protection, this unit is
grounded through the power cord plug when
plugged into a matching wall outlet. If you
are not sure whether the wall outlets in your
home are properly grounded, please consult
a qualified electrician.
WARNING: Improper connection of the
grounding plug can result in risk of Fire,
Electric Shock, and/or injury to Persons
associated with the appliance. Check with a
qualified service representative if in doubt
that the appliance is proplery grounded.
4) DO NOT USE PLUG ADAPTERS OR
EXTENSION CORDS WITH THIS UNIT. If it
is necessary to use an extension cord with
this unit, use an approved “air conditioner”
extension cord only (available at most local
hardware stores).
5) To avoid the possibility of personal injury,
always disconnect the power supply to the
unit before installing and/or servicing.
ELECTRICAL
SPECIFICATIONS
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps *AWG Wire Size
10 16
AWG- American Wire Gauge
*Based on copper wire at 105°C temperature rating.
TABLE 2
Receptacle and Fuse Types
Rated Volts 125
Amps 13
Wall Outlet
Fuse Size 15
Time Delay Fuse Plug Type
(or Circuit Breaker)
CAUTION: Do not leave this unit
unattended in a space where people or
animals cannot react to a failed unit are
located. A failed unit can cause extreme
overheating or death in such an
enclosed, unattended space.
3
Air Exhaust
LCD
Display
Front
Panel
Handles
Wheels
Air Filter
Air inlet
Air outlet
Cover
Electricity
cable Water drain
Air inlet

POWER SUPPLY
CORD
The power cord supplied with this air conditioner contains a
device that senses damage to the power cord. To test if your
power cord is working properly, you must do the following:
IMPORTANT SAFETY INFORMATION
ENERGY-
SAVING TIPS
Your Danby appliance is designed to be highly efficient in energy
savings. Follow these recommendations for greater efficiency.
1) Select a thermostat setting that suits your
comfort needs and leave at that chosen
setting.
2) The air filter is very efficient in removing
airborne particles. Keep the air filter clean
at all times.
3) Use drapes, curtains or shades to keep
direct sunlight from penetrating and heating
room, but do not allow drapes or curtains to
obstruct the air flow around the unit.
4) Start your air conditioner before the
outdoor air becomes hot and
uncomfortable, to avoid an initial period of
discomfort while the unit is cooling off the
room. Use of the automatic start/stop
programmable TIMER feature can be a
major asset in this regard if utilized to the
fullest extent.
5) When outdoor temperatures are cool
enough, turn the air conditioner off and use
the FAN MODE. This circulates indoor air,
providing some cooling comfort while
utilizing less electricity.
NOTE: The power cord supplied with this
air conditioner contains a current leakage
detection device designed to reduce the
risk of fire. In the event the power supply
cord is damaged, it cannot be repaired
and must be replaced with a new cord
from the product manufacturer.
• Under no circumstances should this
device be used to turn the unit on or off.
• The “RESET” button must always be
pushed in (engaged) for correct operation.
• The power supply cord must be replaced
if it fails to reset when the “TEST” button
is pushed in.
1) Connect the power supply cord to an
electrical outlet.
2) The power supply cord has two buttons
located on the head of the plug. One
button is marked “TEST”, and the other is
marked “RESET”. Press the “TEST”
button; you will hear a click as the
“RESET” button pops out.
3) Press the “RESET” button; you will
hear a click as the button engages.
4) The power supply cord is now
energized and supplying electricity to the
air conditioner (on some products this is
also indicated by a light on the plug
head).
4

INSTALLATION
WINDOW KIT
Air Conditioning Mode ONLY
Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to
a maximum height of 80” (203cm). For vertical window applications, multi lock positions are
provided on the edge of each slider section to secure each sliding section together.
1) Select a suitable location, making sure you have access to an electrical outlet.
2) Install the flexible hose to the rear side of the unit. Insert the hose collar on top of the
exhaust opening and twist to lock into position.
3) Install the adjustable Window Slider Kit as required (see Fig. 3a & 3b).
4) Install the opposite end of the flexible exhaust hose into the window exhaust adapter.
5) Install the window exhaust adapter into the opening in the slider section, making sure
the window slider sections are secure.
6) Plug the unit into a 115V/60Hz grounded electrical outlet.
Window Slider Kit:
Min.: 28 1/3” (67.5cm)
Max.: 80” (203cm)
Window Slider Kit:
Min.: 28 1/3” (72cm)
Max.: 80” (203cm)
5
Horizontal Window
Vertical
Window
Fig. 1 INSTALLATION ACCESSORIES
There should be at least 11.8” (30cm) clearance
between the unit and any other objects or
building structures, and should be installed on a
level surface. The unit does not have to be
vented outside during Dehumidifying or Fan
Only mode operation.
Flexible Exhaust Hose
Exhaust Nozzle
Connector
Fixture
Adjustable Window Slider Kit:
28 1/3” (72cm)- 80” (203cm)
INSTALLATION
Flexible Exhaust Hose (13cm) & Exhaust
nozzle connector (2 pcs)... from 17 7/10” (45cm)
up to 53 1/6” (135cm)
Flexible Exhaust Hose (11cm) & Exhaust
nozzle connector (2pcs)...from 15 3/4” (40cm) up
to 51 1/5” (130cm)
Ajustable window door slider kit (3 pcs).....
from 28 1/3”(72cm) up to 80” (203cm)
Fixture..... (2 pcs)
Screws......(12 pcs)
NOTE: The exhaust/window kit must be installed
at all times when the unit is operating under AIR
CONDITIONING mode. Screws
ELECTRIC SHOCK HAZARD: To avoid the possibility of personal
injury, disconnect power to the unit before installing or servicing.
Back of Window Pane
Tube Adapters
Fig. 2
Instructions for Assembling the Window
Adapter Kit- Fig. 2
1) Insert tube adapters through the back of the
window panel.
2) Secure each tube adapter with four screws
through the front of the window panel.
3) Insert window panel extensions into window
panel. Lightly tighten the screws in the window
panel to hold the extensions in place.
Fig. 3a Fig. 3b

OPERATION- Features of the Control Panel
6
Warning Light Receiving Sensor
KEY PAD FUNCTIONS
POWER SWITCH:Turns unit ON/OFF
MODE: Allows you to scroll through and
select desired operating mode.
FAN: Select from three different fan
settings; High, Medium, and Low.
AUTO-TIMER
AUTO-TIMER Adjust:
Auto off- With machine in running mode, press
timer button to set timer control. Press
buttons to select number of hours you
would like the unit to run before it automatically
shuts off.
Auto on- With machine in stand by mode,
press timer button to set timer control. Press
buttons to select number of hours before
the unit automatically starts running in air
conditionning mode.
NOTE: The time is adjustable between 1-24
hours.
TEMPERATURE Adjust:
• Used for adjusting the thermostat.
• The default display is room temperature.
• In cooling mode, when
button is pressed, the set temperature is
displayed and may be adjusted. After 15 seconds
the display will revert back to room temperature.
Temperature is only adjustable in cool mode.
Warning Light
Condensed water may accumulate in
the unit. If the internal tank becomes
full, the Warning signal in the LCD
Display will light up and the unit will not
operate until it has been drained.
LCD Display
Cooling Mode
Dehumidify Mode
Fan Only Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Display Set Temperature
Display Timer Setting of Auto
Switch ON / OFF
Warning Light (the machine will
stop running)
NOTE: By pressing both
buttons at the same time for more
than 3 seconds, the display will
toggle between Celsius and
Fahrenheit.

OPERATING INSTRUCTIONS
7
AIR
CONDITIONING
IMPORTANT: The exhaust hose must be properly vented
(outdoors) during air conditioning mode.
1) Press the POWER SWITCH key (Fig. A) to switch
on the unit, and the previous set temperature will
be shown in the temperature display area of the
control panel.
2) Press the MODE key (Fig. B) until the COOL
indicator light illuminates on the control panel
(Fig.C). Each depression of the MODE key will
advance to a different mode setting
(Cool-Dehumidifier-Fan-Heat-Auto)
3) Press the appropriate or buttons (Fig. D1
& D2) to select a suitable operating temperature
setting. Temperature settings are adjustable
between 16°C (61°F) to 32°C (89°F).
4) Press the FAN key (Fig. E) to select the desired
fan speed setting (Auto-High-Med.-Low). Your
selection will appear on the control panel (each
depression of the fan key will advance to a different
setting).
• Cooling stops automatically when the set
temperature is achieved. Cooling resumes when the
room temp. rises above the “set” temperature level.
Fig. A
Fig. B
Fig. C
Fig. D1 Fig. D2
Fig. E Fig. F

OPERATING INSTRUCTIONS (cont’d)
8
DEHUMIDIFIER
Note: During dehumidifier mode, the exhaust hose
does not have to be vented outdoors.
1) Press the ON/OFF key pad to switch the unit on
(Fig. G)
2) Press the MODE key (Fig. H) until the DRY
indicator illuminates on the control panel (Fig.I).Each
press of the MODE key will advance to a different
mode setting (Cool-Dehumidifier-Fan-Heat-Auto).
IMPORTANT: There is no fan speed or temperature
adjustment during dehumidifier mode. The fan speed
is factory set for Low and the dehumidifier operates
continuously (non-stop) regardless of ambient
humidity level or set temperature.
FAN NOTE: During Fan Mode, the exhaust hose
does not have to be vented outdoors.
1) Press the ON/OFF key pad to switch the unit on
(Fig. G).
2) Press the MODE key (Fig. H) until the FAN
indicator illuminates on the control panel (Fig. J).
Each press of the MODE key will advance to a
different mode setting (Cool-Dehumidifier-Fan-Heat-
Auto).
3) Press the FAN Key (Fig. K) to select the desired
FAN SPEED setting. Your selection will appear on
the control panel. Each press of the fan key will
advance to a different fan speed (High- Med- Low)
as shown in Fig. L.
Fig. J
Fig. H
Fig. G
Fig. I
Fig. K
Fig. L

OPERATING INSTRUCTIONS (cont’d)
AUTO-TIMER The AUTO-TIMER feature offers a unique selection of multiple
choice, fully automatic on and/or off (start/stop) programs between
1-24 hours under any one mode of your Home Comfort unit.
The programs are as follows:
a) Auto-Off: Pre-select a time that will turn off the unit automatically (between 1-12hrs).
b) Auto-On: Pre-select a time that will turn on the unit automatically (between 1-12hrs).
c) Auto-On & Auto Off: Pre-select a time that will turn the unit ON / OFF automatically
at specified times (between 1-12hrs).
Note: These functions must be performed daily, as the program is automatically
canceled/erased after the program has ended.
9
REMOTE CONTROL
FEATURES
Control Buttons:
1) Power Switch
2) Mode
3) Fan Speed
4) On / Off Timer
5) Time / Temperature Set
• Used for adjusting the timer and
temperature.
• The default display on control panel is
room temperature.
• When key is pressed in
cool mode, the set temperature is
displayed and may be adjusted. After 10
seconds the display will revert back to
room temperature.
• Timer setting is available from 1-24
hours by pressing the key
To operate the hand held remote control
you will require two “AAA” Alkaline
batteries (included).
Batteries should be replaced when:
a) No signal (beep) is heard when attempting to program the main unit.
b) The main unit does not respond to a command issued by the remote control.
Battery replacement:
1) Slide the rear cover on the remote in the direction of the arrow. Continue pulling (gently)
until the cover separates completely from the unit.
2) Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside the
battery chamber (+ / -).
3) Re-install rear cover.
4) If the remote control will not be used for extended periods of time (vacations, etc.),
batteries should be removed.
The remote operates within a range of 8 meters (26 ft.) from the receiver located inside
the main unit. Any obstruction between the receiver and remote may cause signal
interference, limiting the ability to program the unit.
Notes:
1) Do not drop the remote control.
2) Do not place the remote control in a location exposed to direct sunlight.
3) The remote control should be placed about 1 meter or more away from TV, or any
electrical appliances.
This Class B digital apparatus complies with canadian ICES-003.