Danby DFG17A1B User manual

HOME HERB GROWER
Owner’s Manual...............................1 - 8
CULTIVATEUR À HERBE À LA MAISON
Manuel du propriétaire...................9 - 16
CULTIVADOR DE HIERBAS PARA EL HOGAR
Manual del propietario.................17 - 24
MODEL •MODÈLE •MODELO
DFG17A1B
2017.10.16

Welcome
Welcome to the Danby family. We are proud of our quality products and we believe in
dependable service. We suggest that you read this owner’s manual before plugging in your new
appliance as it contains important operation information, safety information, troubleshooting and
maintenance tips to ensure the reliability and longevity of your appliance.
Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance
call 1-800-263-2629.
Note the information below; you will need this information to obtain service under warranty.
You must provide the original purchase receipt to validate your warranty and receive service.
Any returned appliances must include the original grow light system.
Model Number: _________________________________________________
Serial Number: _________________________________________________
Date of Purchase: _______________________________________________
Need Help?
Before you call for service, here are a few things you can do to help us serve you better.
Read this owner’s manual:
It contains instructions to help you use and maintain your appliance properly.
If you receive a damaged appliance:
Immediately contact the retailer or builder that sold you the appliance.
Save time and money:
Check the troubleshooting section at the end of this manual before calling. This section
will help you solve common problems that may occur.
1-800-26- Danby
(1-800-263-2629)
1

SAFETY REQUIREMENTS
This appliance is not intended for use by persons
(including children) whose physical, sensory or
mental capabilities may be different or reduced,
or who lack experience or knowledge, unless such
persons receive supervision or training to operate
the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they
do not play with the appliance.
To avoid risk of electric shock, do not operate this
appliance in an area that is likely to accumulate
standing water. If this condition develops, disconnect
the power supply before stepping into the water.
Do not store or use combustible materials such as
gasoline or other flammable vapors or liquids in the
vicinity of this or any other appliance.
Do not cover or block the intake and exhaust
openings.
This appliance is intended for indoor, residential
applications only. Do not use this appliance
outdoors. Do not use this appliance for commercial
or industrial applications.
DANGER: Risk of child entrapment. Before throwing
away an old appliance:
• Remove the door or lid.
• Leave shelves in place so that children may not
easily climb inside.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding
reduces the risk of electrical shock by providing an
escape wire for the electrical current.
This appliance has a cord that has a grounding
wire with a 3-prong plug. The power cord must be
plugged into an outlet that is properly grounded.
If the outlet is a 2-prong wall outlet, it must be
replaced with a properly grounded 3-prong wall
outlet. The serial rating plate indicates the voltage
and frequency the appliance is designed for.
WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualified electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.
Do not connect the appliance to extension cords,
adapters or together with another appliance in the
same wall outlet.
Do not splice the power cord. Do not under any
circumstances cut or remove the third ground prong
from the power cord.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualified person in order to avoid hazard.
For lighting equipment with cords please ensure that
the cords:
1)Are not concealed or extended through a wall,
floor, ceiling, or other parts of the building structure,
2)Are not located above a suspended ceiling or
dropped celing,
3)Are not permanently affixed to the building
structure,
4)Are routed so that they are not subject to strain
and are protected from physical damage,
5)Are visible over their entire length, and
6)Are used within their rated ampacity as
determined for the maximum temperature of the
installed environment specified in the instructions.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
2

OPERATING INSTRUCTIONS
3
LOCATION
Select a location with a strong level floor that can
support the weight of the appliance and the plants
grown inside.
Allow 5 inches (12.7 cm) between the back of the
appliance and the wall. Allow 1 inch (2.5 cm) of
space between the sides of the appliance and any
adjacent walls.
Avoid direct sunlight and heat. Direct sunlight may
affect the acrylic coating of the appliance or the
growing cycle of your plants. Nearby heat sources
can overheat the unit and cause high internal
temperatures that may harm your plants.
Ensure that the appliance is turned off and
unplugged before any changes are made to the
light system.
Keep the door closed during operation.
Only use genuine spare parts from Danby or those
that have been CSA, UL or CE approved.
The LED light panel is not water proof. Do not spray
water on the surface, sides or back of the light
panel.
Do not look directly at the LED light with the naked
eye as this can cause retinal damage.
Recommended ambient operating temperature is
between 13°C - 32°C (55°F - 90°F).
Recommended operating humidity is below 80%.
The LED panel cannot be exposed to corrosive
materials.
The LED panel is for indoor growing only and
should not be used outdoors.
Do not touch the surface of the light system while the
power is connected as it can get hot.
Do not use the LED panel during a thunderstorm to
avoid a surge that could damage the light system.
FEATURES
1. LED grow light system
2. Air outlet
3. Control box
4. Drip tray
5. Wire shelf
6. Air inlet
7. Adjustable foot
8. Glass door
LEVELING INSTRUCTIONS
There is an adjustable foot on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling foot counter-clockwise until
the top of the foot is touching the bottom of the
cabinet.
2. Slowly turn the leveling foot clockwise until the
appliance is level.
1
23
4
6
5
7
8

OPERATING INSTRUCTIONS
4
LIGHT INSTALLATION INSTRUCTIONS
The grow light system will ship inside the appliance
and must be installed by the end user.
1. Remove the light system from the box and
remove any packaging.
2. Connect the wire coming from the back of the
light system to the receptacle on the back wall of
the appliance.
3. Slide the light system into the two “L” shaped
brackets installed on the ceiling of the cabinet.
To remove the light system, first disconnect the light
from the receptacle and then push the end of the “L”
shaped bracket down and slide the light out.
CONTROL PANEL
The control panel is located on the control box on
the upper right side of the cabinet.
1. Up arrow: Press and hold the up arrow for 5
seconds to manually turn the light system on or
off. Press again to resume normal functioning.
2. Down arrow: Press and hold the down arrow
for 5 seconds to manually turn the fan on or off.
Press again to resume normal functioning.
3. Display screen: The display screen will show
the current internal temperature and the timer
settings.
4. Set button: The set button is used to set the timer
function.
5. °C/°F indicator lights: The light will illuminate
to indicate which temperature scale is being
displayed. To change the temperature scale,
press the set button. The default setting is
Fahrenheit.
12
3
4
5