Danfoss Link CC User manual

Danfoss Link™ CC Central Controller
Installation Guide
www.danfoss.com

Installation Guide Danfoss Link™CC
2
Danfoss Heating Solutions VISGL90N 12/2014

Installation Guide Danfoss Link™CC
3
Installation Guide.................................................. 5
Installationsanleitung ............................................39
Guide d’installation ...............................................73
Installationsvejledning...........................................107
Installatiehandleiding............................................141
Installationsguide ...............................................175
Guía de instalación.............................................. 209
GB
DE
FR
DK
NL
SE
ES
Danfoss Heating Solutions VISGL90N 12/2014

Installation Guide Danfoss Link™CC
412/2014 VISGL90N Danfoss Heating Solutions

Installation Guide Danfoss Link™CC
5
Danfoss Heating Solutions VISGL90N 12/2014
GB
Content
1. Quick guide for installation ........................................ 7
2. Introduction ...................................................... 8
3. Guidelines for installation ......................................... 9
3.1. Correct installation plan............................................10
3.2. Incorrect installation plan ..........................................11
3.3. How and when to use repeater units ...............................12
3.4. Where to place repeater units ......................................13
4. Installation....................................................... 15
4.1. Adding devices to the system ......................................16
4.2. Connecting power,setting country, language and date/time........16
4.3. Starting up the installation menu ..................................17
4.4. Mounting Mains powered devices..................................17
4.5. Adding service devices.............................................18
4.6. Mounting battery operated devices ................................19
4.7. Creating rooms ....................................................19
4.8. Adding room devices ..............................................20
4.9. Performing a network test .........................................21
4.10. Finalizing installation ..............................................22
GB

Installation Guide Danfoss Link™CC
612/2014 VISGL90N Danfoss Heating Solutions
5. Modifying an existing installation.................................23
5.1. Adding devices to an existing room ................................23
5.2. Changing parameters for Heat Regulations.........................24
5.3. Removing a room or service device from the network ..............26
5.4. Factory reset of Danfoss Link™ CC ..................................28
6. Wi-Fi and App connection.........................................29
6.1. Connect to Wi-Fi ...................................................29
6.2. Connect to App....................................................30
6.3. Edit connected devices ............................................31
7. Upgrading software version ......................................32
8. Warnings.........................................................33
8.1. Alert icons .........................................................34
9. Technical specications and approvals ............................35
10.Disposal instructions .............................................38

Installation Guide Danfoss Link™CC
7
Danfoss Heating Solutions VISGL90N 12/2014
GB
1. Quick guide for installation
1. 2.
^
^
^
^
+
-
+
-
Install all mains powered devices
rst, and add to network.
Create rooms and add battery opera-
ted devices one by one.
3.
“O
K”
4.
www.link.danfoss.com
Information
Manual
Updates
www.link.danfoss.com
Welcome
Wilkommen
Velkommen
Välkommen
Powitanie
Bienvenue
Welkom
Bienvenido
Vitán
Teretulnud
Gaidīts
Tervetuloa
Information
Manual
Updates
Unfold
and
place
Perform the network test with the
Danfoss Link™ CC in its nal position.
Place the hanger onto the Danfoss
Link™ CC.
Tips!
• The
?
key can be used at any point during installation.
• Always look for the latest software version at www.link.danfoss.com before instal-
lation. See chapter 7: Upgrading software version.
GB

Installation Guide Danfoss Link™CC
812/2014 VISGL90N Danfoss Heating Solutions
2. Introduction
Danfoss Link™ is a programmable, wireless control
system for heating systems in residential buildings (up
to approximately 300 m2).
The central controlling unit is the Danfoss Link™ CC
equipped with a colour touch screen, from which the
entire installation can be controlled.
This installation guide contains all information about
the Danfoss Link™ CC and how to get started. It guides
through recommendations and considerations that
must be taken into account when handling a wireless
system - and it describes conguration of the system,
to ensure a smooth and reliable system set-up.
!
Individual instructions, supplied with the service and room devices, contain
information about connecting the respective device to the network. The in-
struction will also state if the device is considered a service or a room device.

Installation Guide Danfoss Link™CC
9
Danfoss Heating Solutions VISGL90N 12/2014
GB
3. Guidelines for installation
The signal strength is sucient for most applications, however, wireless signals
are weakened on the way from the Danfoss Link™ CC to the room devices and
each building has dierent obstacles.
Ensure the best performance by keeping the following in mind for planning and
installation:
• Max. 30 m between devices in free space.
• Receiving devices should be placed on opposite or next wall as the transmitter,
if possible.
• All metallic parts in the building construction can weaken wireless signals.
• Reinforced concrete walls and oors weaken the signal strength signicantly,
but almost all types of construction materials reduce the signal to some
degree.
• Corners, which is a result of the design of the building, can weaken the wireless
signals, due to either a longer distance or missing reecting opportunities.
Note!
To get a good overview of the devices in each rooms, and their placement, Danfoss
recommends that an installation plan is made before beginning the actual installation.
GB

Installation Guide Danfoss Link™CC
10 12/2014 VISGL90N Danfoss Heating Solutions
3.1. Correct installation plan
No metal objects between the Danfoss Link™ CC and other wireless Danfoss
units.
The Danfoss Link™ CC is installed as central as possible on the oor plan
(max. 30 m between devices in free space).
Wireless signal through walls on shortest possible diagonal distance.
Danfoss
Link™ RS
(room device)
Metal
object
living connect®
(room device)
living connect®
(room device)
Danfoss Link™ CC
Danfoss
Link™ HC
(service device)