Danfoss RET230P User manual

MAKING MODERN LIVING POSSIBLE
RET230P
Electronic Thermostat
Danfoss Heating

RET230P
2
For a large print version of these instructions
please call Marketing on 0845 121 7400.
Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other
printed material. All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
®
Certification Mark

Danfoss Heating 3
GB
F
D
ES
DK
NL
GR
PL
LT
I
TR
RUS
4-6 GB - Specification 12 GR - Προδιαγραφή
7 F- Spécifications 13 PL - Specyfikacja
8 D- Tecnishe Daten 14 LT - Specifikacija
9 ES - Especificaciones 15 I- Specificazioni
10 DK - Specifikation 16-17 TR - Teknik Özellikleri
11 NL - Technische Specificaties 18 RUS - Технические характеристики
19-20 GB - Mounting, F- Montage, D- Befestigung, ES - Montaje,
DK - Montering, NL - Montage, GR - Εγκατάσταση, PL - Montaż,
LT - Montavimas, I- Montaggio, TR - Teknik Özellikleri,
RUS - Монтаж
21-22 GB - Wiring, F- Câblage, D- Verkabelung, ES - Cableado,
DK - Ledningsføring, NL - Aansluitingen, GR - Συρμάτωση,
PL - Podłączanie przewodów, LT - Laidai, I- Cablaggio, TR - Baglantılar,
RUS - Электропроводка
23 GB - Mounting, F- Montage, D- Befestigung, ES - Montaje
DK - Montering, NL - Montage, GR - Εγκατάσταση, PL - Montaż,
LT - Montavimas, I- Montaggio, TR - Teknik Özellikleri, RUS - Монтаж
24 GB - Locking & limiting, F- Verrouillage & Limitation,
D- Sperren & Begrenzen, ES - Bloquear y Limitar,
DK - Låsning og begrænsning, NL - Blokkeren & Begrenzen,
GR - Ασφάλιση και περιορισμός, PL - Zamknięcie i ograniczenie,
LT - Blokavimas ir ribojimas, I- Bloccaggio e esclusioni,
TR - Ayar butonu, RUS - Блокировка и ограничения

F
ES
D
DK
NL
PL
GR
LT
I
RUS
TR
RET230P
4
GB
What is a room thermostat?
... an explanation for householders
A room thermostat simply switches the heating system on and off as
necessary. It works by sensing the air temperature, switching on the
heating when the air temperature falls below the thermostat setting,
and switching it off once this set temperature has been reached.
Turning a room thermostat to a higher setting will not make the
room heat up any faster. How quickly the room heats up depends
on the design of the heating system, for example, the size of boiler
and radiators.
Neither does the setting affect how quickly the room cools down.
Turning a room thermostat to a lower setting will result in the room
being controlled at a lower temperature, and saves energy.

F
ES
D
DK
NL
PL
GR
LT
I
RUS
TR
Danfoss Heating 5
GB
The heating system will not work if a timeswitch or programmer has
switched it off.
The way to set and use your room thermostat is to find the lowest
temperature setting that you are comfortable with, and then leave
it alone to do its job. The best way to do this is to set the room
thermostat to a low temperature – say 18°C – and then turn it up by
one degree each day until you are comfortable with the temperature.
You won’t have to adjust the thermostat further. Any adjustment
above this setting will waste energy and cost you more money.
If your heating system is a boiler with radiators, there will usually
be only one room thermostat to control the whole house. But you
can have different temperatures in individual rooms by installing
thermostatic radiator valves (TRVs) on individual radiators. If
you don’t have TRVs, you should choose a temperature that is
reasonable for the whole house. If you do haveTRVs, you can choose
a slightly higher setting to make sure that even the coldest room
is comfortable, then prevent any overheating in other rooms by
adjusting the TRVs.
Room thermostats need a free flow of air to sense the temperature,
so they must not be covered by curtains or blocked by furniture.
Nearby electric fires, televisions, wall or table lamps may prevent the
thermostat from working properly.

F
ES
D
DK
NL
PL
GR
LT
I
RUS
TR
RET230P
6
GB
Specifications
Temperature range 5-30°C
Construction BS EN60730-2-9
Maximum Ambient Temperature 45°C
IP Rating IP20
Supply Voltage 230Vac ±15%, 50/60Hz
Switch Rating 3(1)A
Switch Type 1B
Control Pollution Situation Degree 2
Rated Impulse Voltage 2.5kV
Ball Pressure Test 75°C
Specification

GB
ES
D
DK
NL
PL
GR
LT
I
RUS
TR
Danfoss Heating 7
F
Spécifications
Plage de températures 5-30°C
Normes de fabrication BS EN60730-2-9
Température ambiante maximale 45°C
Indice de protection IP20
Tension d’alimentation 230Vac ±15%, 50/60Hz
Caractéristique de commutateur 3(1)A
Type de commutateur 1B
Etat du contrôle de pollution Degré 2
Essai à la bille 2.5kV
Tension assignée de tenue au choc 75°C
Spécifications

GB
F
ES
DK
NL
PL
GR
LT
I
RUS
TR
RET230P
8
D
Technische Daten
Temperaturbereich 5-30°C
Bauart BS EN60730-2-9
Maximale Umgebungstemeratur 45°C
Schutzart IP20
Betriebsspannung 230Vac ±15%, 50/60Hz
Nominaler Kontaktstrom 3(1)A
Schalterart 1B
Emissionswerte Grad 2
Nennimpulsspannung 2.5kV
Kugeldruckprüfung 75°C
Tecnishe Daten

GB
F
D
DK
NL
PL
GR
LT
I
RUS
TR
Danfoss Heating 9
ES
Especificaciones
Rango de temperatura 5-30°C
Fabricación BS EN60730-2-9
Temperatura ambiente máxima 45°C
Protección IP IP20
Alimentación 230Vac ±15%, 50/60Hz
Carga del interruptor 3(1)A
Tipo de interruptor 1B
Estado de control de polución Grado 2
Tensión del impulso 2.5kV
Ensayo de presión con bola 75°C
Especificaciones

GB
F
ES
D
NL
PL
GR
LT
I
RUS
TR
RET230P
10
DK
Specifikation
Temperaturområde 5-30°C
Konstruktionsnorm BS EN60730-2-9
Maks. omgivende temperatur 45°C
Tæthedsgrad IP20
Forsyningsspænding 230Vac ±15%, 50/60Hz
Kontaktbelastning 3(1)A
Kontakttype 1B
Forureningssituation Grad 2
Nominel Impuls Spænding 2.5kV
Kugle tryk test 75°C
Specifikation