DAS.4 CN30 User manual

User ManualCN30
tness tracker

In Power off page, long touch the function key for more than 3 seconds
to enter the shutdown interface, and short touch to select YES, system
will be powered off if no operation in 3 seconds.

In the default time/date page, short touch the function key can switch
band to different pages. The screen will be turned off if no operation
in 5 seconds.
In heart rate/blood pressure page, long touch the function key to start
the measurement. The result will be displayed in 50s, and then the screen
will be turned off automatically.
To download and install "Yoho Band", pls scan the QR code below,
or search in APP Store.
Bluetooth 4.0 support.

After the band is bundled to APP successfully, the APP will save the
band info, search and connect the band automatically if the APP is
opened or running in the background.

In the connected state, if the SMS remind function is enabled, the band
will vibrate when there is a SMS.
In the connected state, if you turn on this feature, the band will vibrate
when there are WeChat, QQ, Facebook and other notifications on your
phone, and the message will be displayed on wristband. (Need to turn on
notification in phone system, and set permission of APP to access system
notifications).
If turned on, the band will vibrate when there is a call, information or other
reminder. If turned off, there will only be remind on screen without vibration,
so as not to disturb you.
Other remind:
Tips for Android phone users:
Tips for Android phone users:

In connected state, click the "Looking for band" option, the band will
vibrate to cause your attention.
appear.
Sedentary switch: please set the time of sedentary reminder and save it.
Raise your hand to light up the screen: set the raise your hand to light up
the screen, and the screen will automatically light up every time you raise
your hand.
Replace the dial background, select the time position and
then sync to the band.
After the APP prompts for successful synchronization, the display can
be viewed on the band.
Band display settings
Function

Long touch for 2 seconds in each page to enter the sub-menu of that function.
Standby Settings: Enter theme interface, can switch three themes.
Band display instructionsBand display instructions
Switch to the heart rate or blood pressure interface, long touch to enter
measurement page, and the result will be displayed in 40 seconds. This
feature is only supported if the band has heart rate or blood pressure sensor.
Long touch to enter motion mode, short touch to switch to running mode,
rope-skipping, or sit-up mode. Long touch to enter each mode.
The pedometer count will start from 0 when switched to this mode.
System time, lasting time and activity number in this period will be shown
in this mode. The activity number will be count in daily number when quit
to normal mode.
Heart rate, blood pressure
Motion Mode
System time, lasting time and rope-skipping number in this period will be
shown in this mode. The record will be cleaned after quit.
Rope-skipping mode

System time, lasting time and sit-up number in this period will be shown
in this mode. The record will be cleaned after quit.
After synchronizing with the mobile phone, you can enter the weather
interface to view the current weather, including: weather conditions, the
highest temperature, the lowest temperature and so on.
Enter the music control interface, can play or pause music and switch the
previous song or the next one.
Weather
Music control
Long press 10 seconds in the MAC address interface to restore factory Settings.
Select YES to restore factory Settings.
The band will track sleeping status only when you wore it during your
sleep in night. Place the band somewhere will not trig the sleeping monitor.
Sleeping status from 9:00pm to 9:00am will be recorded.
Please synchronize your band with APP after 9:00am the next day to
upload the data before you check it.
Factory data reset
Sleep mode

Specifications
English, SC,TC, Netherlands , Russian , French,German, Portuguese,
Spanish,Turkish, Japanese , Polish , Arabic, Malaysia, Thai, Czech, Slovak.
SC,TC, The European.
Notices:

IP67 – Dust proof only.
Water contact is prohibited.

www.das-4.com