DAS.4 SU01 User manual

User Manual
SU01

Requirements:
Android 5.0 and above IOS 9.0 and above
Supports Bluetooth BT 3.0
APP download: M2 WEAR
- IOS/Android phone users: Scan the QR code to
download and install the applicaon.
- Android: Search for “M2 wear” through Play
Store to download and install the applicaon.
- Apple: Search for “M2 wear” through the App
Store to download and install the app.
Inial use
- To ensure the normal use of the watch, please
charge it rst.
- Connect the poles of the cable to the poles of
the watch.
- Note: The reverse contact point will cause the
baery to short-circuit.
Watch and APP connecon
- Please accept all permissions requested by the
applicaon for its smooth operaon. The watch
must be connected to the applicaon to access
all its funcons.
- Connecng with the Applicaon: Open the

app and make sure you have Bluetooth and
GPS enabled on your phone. The app prompts
you to give permission for nocaons. Tap add
device, search for device name, and select it to
connect to.
- Bluetooth connecon: Bluetooth must be
enabled on the watch. Enter the Bluetooth of
the mobile and look for the name of the device.
Select pairing.
- Simple soluon to common Bluetooth
problems: Due to the lack of uniformity in the
Bluetooth protocol of various mobile phone
brands, somemes the Bluetooth connecon
between the mobile phone and the watch can
be unstable. You can turn o the Bluetooth of
the mobile phone and reconnect it or reset the
watch to the factory sengs. You can also press
and hold the power buon for 10 seconds to
restart the clock.
Watch funcons
- Keyboard: Connect to your mobile phone to
make Bluetooth calls from your watch.
- Contacts: Once the clock is successfully con-
nected to the applicaon, you can add contacts
through the applicaon and synchronize with the
clock. You can call your saved contacts directly
from the watch.

- Call log: You can view the history of calls made.
- Applicaon nocaons: The nocaons
received on the mobile phone will also be sent
to the watch.
- Exercise: In the sports menu (running, walking,
cycling, climbing) select an exercise and the
recording of exercise me, distance, calories and
heart rate will begin.
- Pedometer: Record the steps of the day. The
data is reset every me at midnight.
- Sleep Recording: Acvate Sleep Recording to
get a picture of its quality.
- Sedentary life reminder: Set the reminder, the
clock will vibrate and display an alarm.
- Oscilloscope: Posion the watch correctly on
your wrist and measure your heart rate.
- Pressure: Posion the watch correctly on your
wrist and measure your pressure.
- Oxygen Measurement: Posion the watch
correctly on your wrist and measure the oxygen
in your blood.
- Remote photo: Take a photo remotely by giving
the command from your watch.
- Music: Control your phone music wirelessly.
- Find Mobile: Select the feature and your mobile
will ring to locate it.
- Weather: See the temperature of the day.
- Stopwatch: Record me.

- Alarm clock: Set the alarm clock from the
applicaon and the clock will vibrate at the me
you set to alert you.
- Sengs: You can turn vibraon on / o
- Style: You can change the style of the user
interface.
- Info: Find the MAC address, Bluetooth name,
and device version.
- Change brightness: Change the brightness
depending on the environment.
- QR Code: Scan and download the applicaon.
- Reset: Reset your device to its factory sengs.
- Torch: Open the lens and the screen will be at
maximum brightness and white.
- Language: You can change the language from
the watch as well as from the applicaon
- Change dial: Enter the dial seng through the
applicaon. You can view your current dial and
select another one from the list.
Disclaimer
1) Please ensure that Bluetooth and mobile GPS
are turned on. When searching for the device
via Bluetooth, make sure that no other device
is connected. When searching for the device via
Bluetooth, keep a close distance between your
mobile and smartwatch.

2) If the Bluetooth connecon is unstable during
operaon, try restarng the watch and connect-
ing it to the mobile again. Be sure to turn on the
automac start for the smartwatch applicaon,
in the sengs of your mobile phone. Also turn
o the baery opmizaon (without restricons)
for the specic applicaon, so that the connu-
ous applicaon-smartwatch communicaon is
not interrupted.
3) If there is a problem with the watch or its use,
please contact the store where you purchased it.
4) The measurements of the watch are for refer-
ence only and not for medical use. Please follow
your doctor’s instrucons and do not use the
measurements to make your own diagnosis.
5) The watch is waterproof with IP67 cercaon
which means that it can withstand accidental
contact with water. However, it can not be used
for diving or being under water for a long me.
In addion, the watch should not come in con-
tact with hot water, as steam can penetrate the
seal and cause internal damage.
6) The company has the right to modify the con-
tents of this user manual without prior noce.
Some funcons dier depending on the soware
they carry.
7) CAUTION: Do not use a power adapter that

IP67: Dust resistant!
Seawater is prohibited.
The warranty terms that cover the
product are menoned in details on
the ocial website www.das-4.com.
www.das-4.com
gives more than 5v == 1A to charge the device.
If you use a charger larger than 1A for charging,
the circuit and / or baery may be damaged.
8) Once the watch is charging, disconnect the
cable from the power supply to prevent a short
circuit if it comes in contact with conducng
objects.
9) Do not leave the peripherals and accessories
in areas where the temperature is too high or
too low. Otherwise the device may malfuncon.
10) Avoid hing the device to reduce the risk
of damage.