Calibrate stride sensor during training
(on-the-fly calibration):You can calibrate the
foot pod at any phase of your training session
with actual distance correction, when you have
run a known distance, preferably more than
1000 meters, calibrate the foot pod as
instructed in the user manual for the Polar
product in question.
Set calibration factor manually:The
calibration factor is calculated as a ratio of the
actual distance to the uncalibrated distance.
For instance if you run 1200 m and the Polar
product shows a distance of 1180 m, the
calibration factor is 1.000. Calculate the new
factor as follows: 1.000*1200/1180 = 1.017.
The measuring range for the factor is
0.500-1.500.
Service
During the two-year guarantee/warranty period,
we recommend that you service the product at
an authorized Polar Service Center only. The
warranty does not cover damage or
consequential damage caused by service not
authorized by Polar Electro. For further
information see "Limited International Polar
Guarantee".
Changing batteries:To change the batteries of
the foot pod yourself, follow the given
instructions. To ensure the maximum lifespan of
the battery cover, open it only when changing
the battery. When changing the battery make
sure the sealing ring is not damaged. Battery
kits with sealing rings are available at
well-equipped Polar retailers and authorized
Polar Service Centers. In the USA and Canada,
sealing rings are available at authorized Polar
Service centers only.
ENGLISH
3
