Data-Tronix VidcasterIP DT-HDVD-IPSTR-ENC User manual

Version: V1.0.0
DT-HDVD-IPSTR-ENC / DT-HDVD-IPSTR-RX
H.264 encoders/decoders
D
ATA
-T
RONIX
®
User Manual

Important Safety Instructions
1. Do not expose this apparatus to
rain, moisture, dripping or
splashing and that no objects filled
with liquids, such as vases, shall be
placed on the apparatus.
6. Clean this apparatus
only with dry cloth.
2. Do not install or place this unit in
a bookcase, built-in cabinet or in
another confined space. Ensure the
unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct the
unit’s ventilation openings with
newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce
heat.
5. Do not place sources of flames,
such as lighted candles, on the
unit.
7. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
SecurityTronix
10. Refer all servicing to
qualified service
personnel.

www.datatronix.biz
1
Table of Contents
Introduction...................................................................................................................................... 2
Overview .................................................................................................................................. 2
Encoder............................................................................................................................ 2
Decoder........................................................................................................................... 3
Key Features ............................................................................................................................ 4
Encoder............................................................................................................................ 4
Decoder........................................................................................................................... 5
Package Contents .................................................................................................................. 7
Encoder............................................................................................................................ 7
Decoder........................................................................................................................... 7
Specifications.......................................................................................................................... 8
Encoder............................................................................................................................ 8
Decoder......................................................................................................................... 10
Panel Description................................................................................................................. 13
Encoder.......................................................................................................................... 13
Front Panel............................................................................................................ 13
Rear Panel ............................................................................................................. 13
Decoder......................................................................................................................... 15
Front Panel............................................................................................................ 15
Rear Panel ............................................................................................................. 15
Typical Applications...................................................................................................................... 17
IP Matrix.................................................................................................................................. 17
Video Wall....................................................................... Error! Bookmark not defined.
Hardware Installation................................................................................................................... 18
Operating the Encoders/Decoders.......................................................................................... 19
Upgrading the Encoders/Decoders......................................................................................... 20
Troubleshooting............................................................................................................................ 21
Warranty Terms and Conditions ............................................................................................... 25

www.datatronix.biz
2
Introduction
Overview
Encoder
DT-HDVD-IPSTR-ENC is a live H.264 encoder which is used with H.264
decoders to deliver streaming media over IP networks, providing
complete end-to-end streaming systems. It offers one HDMI input,
two streaming media outputs and one stereo audio de-embedding
output. It employs standards-based H.264/MPEG-4 AVC encoding and
supports input signals up to 1920 x 1200@60Hz. The encoder is
capable of outputting two IP streams. One large IP stream supports a
streaming resolution from 480p@60Hz to 1920 x 1200@60Hz to view a
video on the decoder side, the other small one supports resolution
352x288@5Hz to easily fully-preview video from an encoder on PC
software or iPad. Encoders support PoE and can remotely be powered
by compatible power source equipment such as a PoE Ethernet switch,
eliminating the need for a nearby power outlet. They offer
integration-friendly control features such as PC configurator and IP
controller providing simple, flexible control and management options.
In addition, they include RS232 pass-through capacity to control a
third party device such as a projector through IP configurator and IP
controller on your computer. Encoding control provides adjustments
for encoding bit rate and quality. By extending A/V signals over
networks, A/V system capability is significantly expanded. The
VidCasterIP system offers solutions for conference rooms, shopping
malls, hotels, high resolution signage, monitoring centers, schools and
corporate training environments, etc.

www.datatronix.biz
3
Decoder
DT-HDVD-IPSTR-RX is a live H.264 decoder that uses H.264 decoders
to provide complete end-to-end streaming systems. It integrates one
streaming media input and one HDMI output and one stereo
de-embedding audio output. The decoder employs standards-based
H.264/MPEG-4 AVC video decoding and supports streaming
resolutions up to 1920 x 1200@60Hz. High performance signal
processing scales and optimize video input signals to obtain the
intended viewing effects. The output resolutions range from
480p@60Hz to 1920 x 1200@60Hz scaled based on the EDID of the
display. Also, a fixed resolution can be selected from 480p@60Hz to
1920 x 1200@60Hz for output using PC configurator. Decoders
support PoE function and can remotely be powered by compatible
power source equipment such as a PoE Ethernet switch, eliminating
the need for a nearby power outlet. They also feature CEC function,
which allows you to make TV sets play and standby through PC
configurator. They offer integration-friendly control features such as
PC configurator and IP controller providing simple, flexible control
and management options. In addition, they include RS232
pass-through capacity to control a third party device such as a
projector through IP configurator and IP controller on your computer.
The VidCasterIP system offers solutions for conference rooms,
shopping malls, hotels, high resolution signage, monitoring centers,
schools and corporate training environments, etc.

www.datatronix.biz
4
Key Features
Encoder
Streams HDMI signals over IP networks
Supports live IP video stream encoding
Use with H.264 decoders to provide complete end-to-end
streaming systems
Features one HDMI input, two streaming media outputs and one
stereo audio de-embedding output
Supports the resolutions of input signals up to 1920 x
1200@60Hz
Capable of outputting two IP streams. One large IP stream
supports a streaming resolution from 480p@60Hz to 1920 x
1200@60Hz to view a video on the decoder side, the other small
one supports resolution 352x288@5Hz to easily fully-preview a
video from an encoder on PC software or iPad
Offers integration-friendly control features such as PC
configurator and IP controller
Offers RS232 pass-through capacity to control a third party
device such as a projector through IP configurator and IP
controller on your computer
Use with the IP controller for matrix control and management via
LAN (Telnet & Web GUI), as well as for allowing the third party
control system to configure and manage the streaming systems
Supports PoE to be remotely powered by compatible power
source equipment, eliminating the need for a nearby power
outlet
Employs standards-based H.264/MPEG-4 AVC video encoding
Supports HDCP
Configurable encoding data rate up to 30 Mbps

www.datatronix.biz
5
Supports AutoIP, zero-configuration networking (zeroconf), a set
of special technologies that automatically assign dynamic IP
addresses to encoders on startup and a server-less method of
choosing an IP address
Supports communications protocols used on the Internet such as
I P, T C P, U D P, I G M P a n d Te l n e t
Decoder
Supports live IP video stream decoding
Use with H.264 encoders to provide complete end-to-end
streaming systems
Integrates one streaming media input, one HDMI output and one
stereo audio de-embedding output
Supports streaming resolutions up to 1920 x 1200@60Hz
Offers auto scaler function. The output resolutions range from
480p@60Hz to 1920 x 1200@60Hz scaled based on the EDID of
the display. Also, a fixed resolution can be selected from
480p@60Hz to 1920 x 1200@60Hz for output using PC
configurator
Offers integration-friendly control features such as PC
configurator and IP controller
Offers RS232 pass-through capacity to control a third party
device such as a projector through IP configurator and IP
controller on your computer
Use with the IP controller for matrix control and management via
LAN (Telnet & Web GUI), as well as for allowing the third party
control system to control and manage the streaming systems
Employs standards-based H.264/MPEG-4 AVC video decoding

www.datatronix.biz
6
Supports HDCP
Supports PoE to be remotely powered by compatible power
source equipment, eliminating the need for a nearby power
outlet
Features CEC function
Supports AutoIP, zero-configuration networking (zeroconf), a set
of special technologies that automatically assign dynamic IP
addresses to decoders on startup and a server-less method of
choosing an IP address
Supports communications protocols used on the Internet such as
I P, T C P, UDP, IGMP and Telnet
Supports seamless switching

www.datatronix.biz
7
Package Contents
Encoder
1 x Encoder
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
2 x Phoenix Connector (Male, 3.5 mm, 3 pins)
2 x Mounting Ear
Decoder
1 x Decoder
1 x Power Adapter (12V 1A DC)
1 x Detachable Plug
2 x Phoenix Connector (Male, 3.5 mm, 3 pins)
2 x Mounting Ear

www.datatronix.biz
8
Specifications
Encoder
Video
Input Video Port 1 x HDMI IN
Input Video Type HDMI 1.3
Input Video
Resolutions
HDMI:
640 x 480@60Hz, 720 x 480p@60Hz, 720 x
576p@50Hz, 800 x 600@60Hz, 1280 x
720p@50Hz, 1280 x 720p@60Hz, 1024 x
768@60Hz, 1360 x 768@60Hz, 1366 x
768@60Hz, 1280 x 800@60Hz, 1440 x
900@60Hz,1280 x 1024@60Hz, 1400 x
1050@60Hz, 1680 x 1050@60Hz, 1920 x
1080p@24Hz, 1920 x 1080p@25Hz, 1920 x
1080p@30Hz, 1920 x 1080p@50Hz, 1920 x
1080p@60Hz, 1920 x 1200@60Hz
Input Video Signal 0.5~1.2 V p-p
Encoding Data
Rate Up to 30 Mbps, configurable
Output Video
Ports 1 x LAN
Output Video Type H.264/MPEG-4 AVC
Output Video
Resolutions
Large IP stream:
480p@60Hz~1920 x
1200@60Hz

Small IP stream: 352 x 288@5Hz
Video Impendence 100 Ω
Input DDC Signal 5 V p-p (TTL)
End-to-End Time About 79 ms in average
(Low latency

www.datatronix.biz
9
Latency mode)
About 250 ms in average (High quality
mode)
Audio
Input Audio Port 1 x HDMI IN
Input Audio
Format Audio embedded in HDMI input
Output Audio Port 1 x Phoenix connector
Output Audio
Format Stereo analog line level signal
Control
Control Method PC configurator and IP controller
General
Operating
Temperature/
Humidity
+32°F ~ +113°F (0°C ~ +45°C)
10% ~ 90%, non-condensing
Storage
Temperature/
Humidity
-4°F ~ 140°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Power 12 VDC 1 A
Device Power
Consumption
6 W (Max.)
Note:
Powered by PoE: 10 W (Min.) for safe
operation
ESD Protection
Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Surge Protection Voltage: ±1 kV

www.datatronix.biz
10
General
Case Dimensions
(W x H x D)
310 mm x 76 mm x 180 mm
12.2'' x 3.0'' x 7.1''
Product
Dimensions
(W x H x D)
237 mm x 25 mm x 94.3 mm
9.3'' x 1.0'' x 3.7''
Weight 0.48 kg
Certification CE, FCC, RoHS compliant
Decoder
Video
Input Video Port 1 x LAN
Input Video Type H.264/MPEG-4 AVC
Input Video
Resolutions 480p@60Hz~1920x1200@60Hz
Output Video
Port 1 x HDMI
Output Video
Type HDMI 1.3
Output Video
Resolutions
HDMI
：
640 x 480@60Hz, 720 x 480p@60Hz, 720 x
576p@50Hz, 800 x 600@60Hz, 1280 x
720p@50Hz, 1280 x 720p@60Hz, 1024 x
768@60Hz, 1280 x 768@60Hz, 1366 x 768@60Hz,
1280 x 800@60Hz, 1440 x 900@60Hz, 1280 x
1024@60Hz, 1680 x 1050@60Hz, 1920 x
1080p@24Hz, 1920 x 1080p@25Hz, 1920 x
1080p@30Hz, 1920 x 1080p@50Hz, 1920 x
1080p@60Hz, 1600 x 1200@60Hz, 1920 x
1200@60Hz
Video 100 Ω

www.datatronix.biz
11
Video
Impendence
End-to-End Time
Latency
About 79 ms in average (Low latency mode)
About 250 ms in average (High quality
mode)
Audio
Input Audio Port 1 x LAN
Input Audio
Format Audio embedded in streaming media input
Output Audio
Port 1 x Phoenix connector
Output Audio
Format Stereo
Control
Control Method PC configurator and IP controller
General
Operating
Temperature/
humidity
+32°F ~ +113°F (0°C ~ +45°C)
10% ~ 90%, non-condensing
Storage
Temperature/
humidity
-4°F ~ 140°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Power 12VDC 1A
Device Power
Consumption
6 W (Max.)
Note: Powered by PoE: 10 W (Min.) for safe
operation

www.datatronix.biz
12
General
ESD Protection
Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Surge Protection Voltage: ±1 kV
Case Dimensions
(W x H x D)
310 mm x 76 mm x 180 mm
12.2'' x 3.0'' x 7.1''
Product
Dimensions
(W x H x D)
266 mm x 25 mm x 111.3 mm
10.5'' x 1'' x 4.4''
Weight 0.60 kg
Certification CE, FCC, RoHS compliant

www.datatronix.biz
13
Panel Description
Encoder
Front Panel
21
No.
Indicator
Status
Description
1 POWER
Indicator
On Encoder is powered on.
Off Encoder is powered off.
2 STATUS
Indicator
On Encoder is working properly.
Off Encoder is not working properly
Rear Panel
21 3 456
No.
Name
Description
1 Power Input
Connects to a 12 V 1 A power supply.
Note: We recommend that you power
encoders/decoders using power adapters or a
PoE switch; Do not connect the encoder to a
PoE and power supplies at the same time. For
example, if you want to use power adapters,
ensure that PoE function of the connected
LAN ports in the switch is disabled or a
non-PoE switched is used.

www.datatronix.biz
14
No.
Name
Description
2
RS232
Pass-through
Control
1 x RS232: connects to a third party device
such as a camera, which can be controlled by
IP configurator and IP controller on your
computer.
Note: This is a phoenix connector (female, 3.5
mm, 3 pins).
3 Video Input 1 x HDMI IN: connects to an HDMI video
source such as a DVD player and a computer.
4 Audio Output
1 x AUDIO OUT: connects to an audio output
device such as an amplifier and a speaker.
Note: This is a phoenix connector (female, 3.5
mm, 3 pins).
5 Video Output
1 x LAN (POE): connects to an Ethernet
switch for streaming media output.
Note: If you use a PoE Ethernet switch,
encoders can be powered by this switch,
eliminating the need for a nearby power
outlet.
6 Grounding
Screw
Connects to the ground for preventing
electric shock and device damage.

www.datatronix.biz
15
Decoder
Front Panel
2
1
No. Indicator Status Description
1 POWER
Indicator
On Decoder is powered on.
Off Decoder is powered off.
2 STATUS
Indicator
On Decoder is linked to encoder and is
actively outputting video.
Flashing Decoder is not linked to encoder.
Rear Panel
2
13456
No.
Name
Description
1 Power Input
Connects to a 12 V 1 A power supply.
Note: We recommend that you power
encoders/decoders using power adapters or
a PoE switch; Do not connect the encoder to
a PoE and power supplies at the same time.
For example, if you want to use power
adapters, ensure that PoE function of the
connected LAN ports in the switch is
disabled or a non-PoE switched is used.
2 Video Input 1 x LAN (POE):
connects to a switch for

www.datatronix.biz
16
No.
Name
Description
streaming media input.
Note: If you use a PoE Ethernet switch,
decoders can be powered by this switch,
eliminating the need for a nearby power
outlet.
3 Video Output 1 x HDMI OUT: connects to an A/V device
such as an HDMI display device.
4 Audio Output
1 x AUDIO OUT:
connects to an audio
output device such as an amplifier and a
speaker.
Note: This is a phoenix connector (female,
3.5 mm, 3 pins).
5
RS232
Pass-through
Control
1 x RS232: connects to a third party device
such as a projector, which can be controlled
by IP configurator and IP controller on your
computer.
Note: This is a phoenix connector (female,
3.5 mm, 3 pins).
6 Grounding
Screw
Connects to the ground for preventing from
electric shock and device damage.

www.datatronix.biz
17
Typical Application
IP Matrix
You can use encoders and decoders to build a network of IP matrix.
With PC configurator and IP controller, you can configure and manage
this function. For more information, see the respective software user
guides.

18
Hardware Installation
Warning:
Before the installation, disconnect the power supplies from all the devices.
Note:
If the Ethernet switch doesn’t support PoE, connect encoders and decoders to their power supplies.
If the PoE switch is unable to provide enough power, connect encoders/decoders to the power adapters and
disable PoE function of the connected LAN ports in the switch. We would recommend that you power
encoders/decoders using power adapters or a PoE switch instead of using their power supplies at the same time.