Data Video SE-600 User manual

2
Warranty
Standard Warranty
Datavideo equipment is guaranteed against any manufacturing
defects for one year from the date of purchase.
The original purchase invoice or other documentary evidence should
be supplied at the time of any request for repair under warranty.
Damage caused by accident, misuse, unauthorized repairs, sand, grit
or water is not covered by this warranty.
All mail or transportation costs including insurance are at the
expense of the owner.
All other claims of any nature are not covered.
Cables & batteries are not covered under warranty.
Warranty only valid within the country or region of purchase.
Your statutory rights are not affected.
Two Year Warranty
All Datavideo products purchased after 01-Oct.-2008 qualify for a
free one year extension to the standard Warranty, providing the
product is registered with Datavideo within 30 days of purchase. For
information on how to register please visit www.datavideo-tek.com or
contact your local Datavideo office or authorized Distributors
Certain parts with limited lifetime expectancy such as LCD Panels,
DVD Drives, Hard Drives are only covered for the first 10,000 hours,
or 1 year (whichever comes first).
Any second year warranty claims must be made to your local Datavideo
office or one of its authorized Distributors before the extended warranty
expires.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it will not be
treated as household waste. It must be handed over to
the applicable take back scheme for the recycling of
electrical and electronic equipment. For more detailed
information about the recycling of this product, please
contact your local Datavideo office.

3
Introduction
Datavideo understands that users have always been looking for a
completed switcher which can support different kinds of video interfaces.
That’s why datavideo have taken action by offering the optional Digital
Video Output Board for its Digital Video Switcher, the SE-600 and HS-
600. Not only the switcher has the CV, YC, and YUV output selections,
but also the optional board provides additional DV and SDI outputs,
allowing users to select the most suitable recorders or monitors for
video display and editing.
Fitting DV Output Board
The SE-600 & HS-600 has been designed to allow DV Output Board to
be easily added or changed to suit your requirements.
The SE-600 & HS-600 is supplied with blanking plates, which cover the
unused slots.
To remove the blanking plates simply unscrew the screws of each plate
and it will pull away.
DV Output Board support format: SD (480/59.94i, 576/50i)
SE-600
HS-600

4