Data Video HS-1200 User manual

HS-1200
HD 6-CHANNEL
PORTABLE VIDEO STUDIO
Instruction Manual

2
Contents
FCC COMPLIANCE STATEMENT....................................................................................................................................................4
WARNINGS AND PRECAUTIONS..................................................................................................................................................4
WARRANTY ................................................................................................................................................................................5
STANDARD WARRANTY .........................................................................................................................................................................5
THREE YEAR WARRANTY .......................................................................................................................................................................5
DISPOSAL....................................................................................................................................................................................6
1. INTRODUCTION...................................................................................................................................................................7
1.1 FEATURES...............................................................................................................................................................................7
2. REAR PANEL ........................................................................................................................................................................8
2.1 REAR PANEL CONNECTIONS .......................................................................................................................................................8
3. CONTROL PANEL ............................................................................................................................................................... 11
3.1 SWITCHER CONTROL PANEL .....................................................................................................................................................11
User Memory and Function Keys ..............................................................................................................................................11
Menu Control ............................................................................................................................................................................12
Keyer Selection ..........................................................................................................................................................................12
Keyer Source..............................................................................................................................................................................13
PIP Effect ...................................................................................................................................................................................13
Background Transition & GRAB ................................................................................................................................................13
Wipe Border Setting..................................................................................................................................................................13
Wipe Transition Selection..........................................................................................................................................................14
Program & Preview Source Row ...............................................................................................................................................14
Transition Effect ........................................................................................................................................................................15
Audio Control ............................................................................................................................................................................16
3.2 MONITOR CONTROL PANEL .....................................................................................................................................................17
4. SWITCHER OSD MENU OVERVIEW ....................................................................................................................................19
5. SWITCHER OSD MENU FUNCTIONS ...................................................................................................................................25
5.1 START ..................................................................................................................................................................................25
Transition ..................................................................................................................................................................................25
Wipe Effects ..............................................................................................................................................................................25
Border .......................................................................................................................................................................................25
Position .....................................................................................................................................................................................26
Matte ........................................................................................................................................................................................26
5.2 KEYER..................................................................................................................................................................................26
Keyer Control.............................................................................................................................................................................26
Key Source .................................................................................................................................................................................27
Fill Source ..................................................................................................................................................................................27
Mask..........................................................................................................................................................................................27
5.3 CHROMA ..............................................................................................................................................................................27
Keyer .........................................................................................................................................................................................27
CK Setup ....................................................................................................................................................................................27
Mask..........................................................................................................................................................................................28
5.4 P-IN-P .................................................................................................................................................................................28
Position .....................................................................................................................................................................................28
Border .......................................................................................................................................................................................29
Border Width.............................................................................................................................................................................29
Crop...........................................................................................................................................................................................29
5.5 P-IN-P LITE...........................................................................................................................................................................29
Position .....................................................................................................................................................................................29
Border .......................................................................................................................................................................................29
Crop...........................................................................................................................................................................................29
5.6 INPUTS.................................................................................................................................................................................30
Input 1-4....................................................................................................................................................................................30
Freeze........................................................................................................................................................................................30

3
Crosspoint .................................................................................................................................................................................30
5.7 OUTPUTS .............................................................................................................................................................................31
Outputs .....................................................................................................................................................................................31
Audio .........................................................................................................................................................................................31
GPI Out ......................................................................................................................................................................................32
Multiviewer ...............................................................................................................................................................................32
5.8 STILLS ..................................................................................................................................................................................32
Load Still....................................................................................................................................................................................32
Save Still ....................................................................................................................................................................................33
Freeze........................................................................................................................................................................................33
5.9 USER MEMS .........................................................................................................................................................................33
Load Memory ............................................................................................................................................................................33
Save Memory ............................................................................................................................................................................33
5.10 SETUP..................................................................................................................................................................................33
Menu Preference.......................................................................................................................................................................34
Standard....................................................................................................................................................................................34
Menu Mode...............................................................................................................................................................................34
Auto Save ..................................................................................................................................................................................34
Factory Default..........................................................................................................................................................................35
Reset Names .............................................................................................................................................................................35
Language ..................................................................................................................................................................................35
Software....................................................................................................................................................................................35
6. MONITOR OSD MENU OPTIONS........................................................................................................................................36
7. FIRMWARE UPDATE PROCEDURE ...................................................................................................................................... 37
8. GPI CONNECTION.............................................................................................................................................................. 38
9. TALLY OUTPUTS ................................................................................................................................................................39
10. DIMENSIONS ................................................................................................................................................................. 40
11. SPECIFICATIONS ............................................................................................................................................................41
SERVICE AND SUPPORT ............................................................................................................................................................43
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to
give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this
manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or
incorrect information. Datavideo Technologies always recommend that you double check the information in this document for
accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual.
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or
dealer.

4
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe
and reliable operation of this unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on
the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register
or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the marking label of
the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or
your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be
walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the
products plugged into the extension cord do not exceed the extension cord’s rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill
liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous
voltage points or other risks, and will void your warranty. Refer all service issues to qualified service
personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the following
conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only those
controls that are covered by the operating instructions in this manual; improper adjustment of

5
other controls may result in damage to the unit and may often require extensive work by a qualified
technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
Warranty
Standard Warranty
•Datavideo equipment are guaranteed against any manufacturing defects for one year from the
date of purchase.
•The original purchase invoice or other documentary evidence should be supplied at the time of any
request for repair under warranty.
•The product warranty period begins on the purchase date. If the purchase date is unknown, the
product warranty period begins on the thirtieth day after shipment from a Datavideo office.
•All non-Datavideo manufactured products (product without Datavideo logo) have only one year
warranty from the date of purchase.
•Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under
warranty.
•Viruses and malware infections on the computer systems are not covered under warranty.
•Any errors that are caused by unauthorized third-party software installations, which are not
required by our computer systems, are not covered under warranty.
•All mail or transportation costs including insurance are at the expense of the owner.
•All other claims of any nature are not covered.
•All accessories including headphones, cables, and batteries are not covered under warranty.
•Warranty only valid in the country or region of purchase.
•Your statutory rights are not affected.
Three Year Warranty
•All Datavideo products purchased after July 1st, 2017 are
qualified for a free two years extension to the standard warranty,
providing the product is registered with Datavideo within 30 days of
purchase.
•Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard Drive, Solid
State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year.
•The three-year warranty must be registered on Datavideo's official website or with your local
Datavideo office or one of its authorized distributors within 30 days of purchase.

6
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters "CE" are the
abbreviation of French phrase "Conformité Européene" which literally means
"European Conformity". The term initially used was "EC Mark" and it was officially
replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now
used in all EU official documents.

7
1. Introduction
The HS-1200 is a cost effective 6 channel broadcast-quality hand-carry mobile switcher, it is designed for
live events and TV programs that need to mix a variety of video and audio sources. The HS-1200 is a
lightweight, portable and powerful featured mobile studio solution.
Friendly and advanced features include a 17.3-inch video monitor, which displays the multi-view. The Multi-
view includes all the input sources, as well as preview and program.
The HS-1200 is low power consumption and it is ideal for TV and video professionals working in outside
broadcast or on-the-go video studios, such as theatres or conference centers. The HS-1200 is also a great
value solution for the worship, education and AV market.
1.1 Features
Video System
•6 video inputs compatible with 1920x1080i video format
•4 HD-SDI and 2 HDMI video inputs
•2 HD-SDI video outputs and each output can be switched in the menu as:
-PROGRAM (with DSK)
-Clean PROGRAM (without DSK)
-Clean PREVIEW (without DSK)
-MULTISCREEN
-Input 1~6
•1 HDMI video output only for multiviewer
•Keyers for configuring DSK, luma key, chroma key and PiP
•Wipe, Mix & Cut Transitions
•Wipe Generator
-32 Wipe Patterns, including Circle & Heart
-Borders & Softness Control
•Full M/E Preview function
Audio System
•2 x XLR Analogue Audio Inputs
Monitor System
•One 17.3-inch monitor with a resolution of 1600x900 dots
•The blue button eliminates the red and green component of input signals for image calibration.
•6500K, 7500K, 9300K and custom color temperature settings in different environments.
•4:3 MARK LINE for shooting adjustment
•80% or 90% frame ratio

8
2. Rear Panel
1 Power Switch 7 HDMI Video Output (Multiview ONLY)
2 4 PIN XLR Power Input Connector 8 3 PIN XLR Audio Input 1 - 2
3
Monitor HDMI IN (External Video Input)
9
GPI Output Connector
4
HDMI Video Input 1 – 2
10
Ethernet Port
5
HD-SDI Video Input 1 – 4
11
Tally Signal Output
6 HD-SDI Video Output 1 – 2 12 USB Firmware Upgrade Port
2.1 Rear Panel Connections
1. POWER SWITCH
Switches the power On / Off.
2. DC Power Input
Connect the supplied 12V 5A PSU to this 4 PIN XLR socket.
3. Monitor HDMI IN (External Video Input)
The HS-1200 provides a useful connection for confidence
monitoring of HDMI sources on location.
Connect one external HDMI input source for monitoring the
live show.
1
2
3
12
4
5
6
7
8
9
10
11

9
Video Input Modules: The HS-1200 is equipped with six video input channels.
4. HDMI Video Input 1-2
The Video Input set has two HDMI ports.
Note: Please set the INPUT SOURCE in the Switcher Menu.
5. SDI Video Input 1-4
The Video Input set has four SDI connectors.
Note: Please set the INPUT SOURCE in the Switcher Menu.
6. SDI Video Output 1-2
The BNC output connector is a user defined SDI output.
Note: Please set the OUTPUT SOURCE in the Switcher
Menu.
7. HDMI Video Ouput (Multiview ONLY)
Connect the HDMI output
port to an external monitor on
which the Multiview is displayed.
Note: This is NOT a user-defined output which is used for
Multiview Display O NLY.
The limitations of this port are:
1. No audio output.
2. Only 1080p is supported.
8. AUDIO Input 1-2
Supports two XLR Balanced Audio Input channels.

10
9. GPI Output
The GPI socket can be used for simple external control.
Note: Please configure GPI settings in the Switcher Menu.
10. Ethernet Port
Remote control interface
11. Tally Signal Output
Sends Red, and Green tally signals to each channel. Red
indicates On-Air, and Green indicates next camera source.
12. USB Firmware Upgrade Port
Connect the USB drive containing the latest firmware files to
this port and start the firmware upgrade process on the OSD
MENU.
Note: Please refer to the section on Firmware Update
Procedure for firmware upgrade details.

11
3. Control Panel
3.1 Switcher Control Panel
1
User Memory & Function Keys
6
Background Transition & GRAB
2
Menu Control
7
Wipe Border Setting
3
Keyer Selection
8
Wipe Transition Selection
4
Keyer Source
9
Program & Preview source rows
5
PIP Effect
10
Transition Effect
User Memory and Function Keys
User Memory
User Memory buttons 1-6 allow the user to recall and load previously
saved switcher settings.
SHIFT
There are 12 user memory locations. Under normal circumstances,
Buttons USER 1 to 6 represent user memory locations 1 to 6. To load
settings saved in locations 7 to 12 to buttons USER 1-6, simply press the
SHIFT button.
SAVE: User Memory Save
The SAVE button saves the current switcher settings. To save, keep
holding down this button and then select the User Memory number by
pressing the corresponding User Memory button.
1
3
2
8
7
5
4
6
10
9

12
Normalise Button
The NORM button resets the currently opened menu item to the
default values.
Menu Control
Menu Control
Press the MENU button in the HS-1200 function section to enter the
System Configuration Menu. Press the UP,DOWN, LEFT, and RIGHT
arrow buttons to browse the menu options and change values. Use the
ENTER button to save and confirm any setting that has been changed. To
Exit, simply press the MENU button again.
Keyer Selection
Key 1 PGM enables key 1 on the Multi view and PGM output
Key 2 PGM enables key 2 on the Multi view and PGM output
DSK 1 PGM enables DSK 1 on the Multi view and PGM output
DSK 2 PGM enables DSK 2 on the Multi view and PGM output
Key 1 PVW enables key 1 on the Multi view and PVW output
Key 2 PVW enables key 2 on the Multi view and PVW output
DSK 1 PVW enable DSK 1 on the Multi view and PVW output
DSK 2 PVW enable DSK 2 on the Multi view and PVW output

13
Keyer Source
Selection of Keyer Source from Program / Preset Row
Keep holding down one of these buttons to enter key select mode and
fill select mode. Select key source from the Program row and fill source
from the Preset row.
The selected source button will flash.
KEYER SETUP
Press this button to open Keyer configuration menu on the Multi view
output, and the opened configuration menu corresponds to the selected
keyer (Key 1/Key 2/DSK 1/DSK 2).
DSK AUTO
Auto DSK transition function either transitions “DSK 1 or DSK 2
individually” or transitions “DSK 1 and DSK 2 simultaneously”
PIP Effect
PIP enables the PIP key mode
PIP LITE enables the PIP LITE key mode
Background Transition & GRAB
TRANS BG enables Background Transition between Program / Preset
GRAB grabs the current Program video image
Wipe Border Setting
BDR ON/OFF turns the WIPE border function ON/OFF
BDR SOFT configures the WIPE border softness
BDR COLOR selects the WIPE border color
BDR SIZE adjusts the WIPE border thickness

14
Wipe Transition Selection
WIPE Transition Selection
The HS-1200 has 8 user defined wipe buttons that allow the user
to select WIPE transition effect directly from the control panel.
The REV button reverses the direction of the selected WIPE.
All wipes can have an optional colour border applied. The wipe
border width and colour are chosen within the menu system.
Transitions can be performed manually using the T-
Bar or
automatically by using the SPEED and AUTO TAKE buttons.
Vertical Wipe Left to Right
Vertical Wipes from Centre to Left and
Right sides
Upper Left corner Wipe to Lower
Right corner
Box Wipe from Centre to outside
edges
Diamond Wipe from Centre to outside
edges
Circle Wipe from Centre to outside
edges
Cross Wipe from Centre to outside
edges
Heart Wipe from Centre to outside
edges
Program & Preview Source Row
The Program row of buttons is the active channel, this is the live output. The active channel will appear
as the Program Output. You can switch or CUT from one video source to another directly on the
Program row. You will see the multi view Program output change as you press different keys along this
top row of buttons.
The Preset row is the cued channel; this channel will appear in the Preview window. The Preset row
selection decides which input will be transitioned next when using any of the transition controls.
Buttons 1, 2, 3, 4, 5 and 6 are video source buttons.

15
BLK
Black background – the black background, for use on the Program and Preset row.
BG
Background button – assigns a background colour or colour bars for use on the
Program and Preset row.
Transition Effect
FTB
Fade To Black, this button fades the current video program source to
black. When pressed again it acts in reverse from complete black to
the currently selected program video source.
SPEED
There are three speed buttons which can be defined by the user. By
pressing a speed button the user is choosing the rate of transition or
time taken when using the AUTO TAKE button.
Transition Speed (1, 2 and 3):
Button 1= 12 frame duration, 2= 25 and 3= 50 at 1080i50
Button 1= 15 frame duration, 2= 30 and 3= 60 at 1080i60
PVW TRANS
Transition shown on PVW only
MIX
This button enables MIX transition effect.
WIPE
This button enables WIPE transition effect. The WIPE button must be
selected when a wipe effect transition between the selected Program
and Preset sources is required. This WIPE effect is produced by moving
the T-Bar manually or pressing the AUTO TRANS button.
CUT
This performs a simple immediate switch from the current main source
to the selected sub source. The selected transition wipe or MIX is not
used.

16
AUTO TAKE
This performs an automated switch from the current program source
to the selected Preview source. The selected transition wipe or MIX
will also be used. The timing of the transition is set by the chosen
Speed button.
Audio Control
Headphone Socket
¼ “/ 6.3mm Stereo Headphone Socket for conventional headphones.
MUTE
This button mutes the headphone audio.
Headphone Volume Control
Controls Headphone or Headset volume level.

17
3.2 Monitor Control Panel
Power
Switches the HS-1200 Monitor Power ON / OFF
USB Port
USB port for USB LED Light power supply & 17.3’’ monitor firmware
upgrade.
Source Select Buttons
Select the type of input you are using - HDMI, MV (multi-
view), PGM
(program).
HDMI
Switch the 17.3” built-in monitor to display the video source plugged into
the MONITOR HDMI IN port.
BLUE
Press this but
ton to eliminate the red and green component of input
signals. Only the blue component of an input is displayed on the screen.
This allows adjustments of chroma and phase. (Phase adjustment is
effective with NTSC signals).
MV
Press this button to set the Monitor to MULTIVIEW mode.
PGM
Press this button to set the Monitor to PROGRAM view.
PTN
When pressed displays internally generated SMPTE 75% Colour Bars. Press
again to return to the previously selected video input.

18
ZOOM
This feature is designed for use with HD-SDI and HDMI sources above 720p
resolution. Press this button to zoom in to the video on the display. This is
strictly a zooming function and does not alter the native aspect ratio of the
source pixels to fill the screen.
The ZOOM button allows you to toggle the Pixel Zoom feature between
zoom x1, x2, x4 and x8.
Menu Navigation Buttons
Display and navigate the set up menus - See Monitor Menu Options for
more details.
Aspect Ratio Button
Sets the Aspect Ratio to 16:9 / 4:3
Volume Control
Adjusts the speaker / headphone volume up / down.
MUTE
Mutes the audio from the internal speakers or headphone socket.

19
4. Switcher OSD MENU Overview
When the MENU button is pressed the Main Menu list is displayed on the
HS-1200 monitor.
This section covers the Menu options in the order that they appear on the
HS-1200 monitor. These settings may also appear in more detail elsewhere
in this instruction manual. Options may vary depending on the firmware
version in use.
Once the chosen setting has been confirmed with the ENTER button, it is
stored within the switcher’s non-volatile memory.
Main
Options
Sub-Options Parameters
Start
Transition
(Duration)
M/E
Mix Effect
DSK
Downstream Key Effect
FTB
Fade-to-Black Effect
Type
Clip
Wipe
Mix
Wipe Effects
Wipe
Wipe Effect Presets
Soft
Border Softness
Width
Border Width
Border
Luma
Border Color Luma
Sat
Border Color Saturation
Hue
Border Color Hue
Position
X
Horizontal Position
Y
Vertical Position
Matte
Luma
Background Matte Luma
Sat
Background Matte Saturation
Hue
Background Matte Hue
Keyer
Keyer
DSK 2
DSK 1
Key 2
Key 1
Keyer Selection
Keyer Ctrl
Chroma
Luma
Linear
Type of Keyer
P-in-P Lite
P-in-P lite window enable
P-in-P
P-in-P window enable
Split Select if two sources are enabled for the keyer (Fill and
Key sources)
Self Select if only one source is enabled for the keyer (Key
source)
Priority
Optional and only available when Key 1 and Key 2 are
selected.
Bot – Set to bottom layer
Top – Set to top layer
Lift
Parameter for dark/black areas of the overall foreground
key image

20
Gain
Parameter for light/white areas of the overall foreground
key image
Opac
Parameter for transparency of the overall foreground key
image
Key Source
Bars
Matte
Input 6
Input 5
Input 4
Input 3
Input 2
Input 1
Black
Key Source Selections
Fill
Fill Source Selection from Bars /Matte /Input 6 /Input 5
/Input 4 /Input 3 /Input 2 /Input 1 /Black
Mask
Left
Left sets the left edge of the keyer mask
Right
Right sets the right edge of the keyer mask
Top
Top sets the top edge of the keyer mask
Bottom
Bottom sets the bottom edge of the keyer mask
Chroma
Keyer
DSK 2 (N/A)
DSK 1 (N/A)
Key 2
Key 1
Key Source
Bars
Matte
Input 6
Input 5
Input 4
Input 3
Input 2
Input 1
Black
Key Source Selections
CK Setup
CK Auto
Calculation of the best Hue & Luma values for the
current Keyer source
Hue
Parameter for color of the chroma key
Luma
Parameter for luma of the chroma key
K Range
Setting the range of colors that match the background
color to be keyed
K Fgnd
Adjusts the performance of the chroma key in dark or
black areas
K Bgnd
Adjusts the performance of the chroma key in light or
white areas
Hi-Light
Boosts the foreground key in high luminance area
Lo-Light
Boosts the foreground key in low luminance area
Bg-Supp
Bg-Supp turns ON/OFF background suppress
Mask
Left
Left sets the left edge of the keyer mask
Right
Right sets the right edge of the keyer mask
Top
Top sets the top edge of the keyer mask
Bottom
Bottom sets the bottom edge of the keyer mask
P-in-P
P-in-P Src
Key 1 / Key 2
Selected in the “Keyer” Option
Position
X Horizontal PIP Position
Y Vertical PIP Position
Size PIP Size
Border
Luma
PIP Border Luma