Datalogic Magellan 1100i User manual

Magellan™1100i
Omni-Directional Imaging Scanner
Quick Reference Guide — Guida Rapida
Guide de Référence Rapide — Guía de Referencia Rápida
Schnellanleitung — Referência Rápida
快速参考 —クイック·リファレンス

Datalogic USA, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]
©2009-2017 Datalogic S.p.A. and its Group companies.
An Unpublished Work - All rights reserved. No part of the contents of this documen-
tation or the procedures described therein may be reproduced or transmitted in any
form or by any means without prior written permission of Datalogic S.p.A. and/or its
affiliates ("Datalogic" or "Datalogic USA, Inc.”). Owners of Datalogic products are
hereby granted a non-exclusive, revocable license to reproduce and transmit this
documentation for the purchaser's own internal business purposes. Purchaser shall
not remove or alter any proprietary notices, including copyright notices, contained in
this documentation and shall ensure that all notices appear on any reproductions of
the documentation.
Should future revisions of this manual be published, you can acquire printed ver-
sions by contacting your Datalogic representative. Electronic versions may either be
downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S. and the E.U. All other brand and product names
may be trademarks of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
See the Regulatory Addendum included with your product
for additional regulatory, safety and legal information.

Quick Reference Guide i
Table of Contents
English ....................................................1
Italiano ....................................................5
Español ...................................................9
Portugues .............................................13
Francais ................................................17
Deutsch .................................................21
Chinese ..................................................25
Japanese ...............................................29
Cleaning .................................................33
Warranty................................................34

ii Magellan™ 1100i
NOTES

Quick Reference Guide 1
Quick Reference
This guide is provided to help get your installation up and running
quickly and efficiently. For more details, including programming
information, reference the Product Reference Guide (PRG), which
is available for viewing and download from the Datalogic website
listed on the back cover of this manual.
Installation
Route the interface cable from the terminal or host. Plug the AC
adapter (if one is used) into a wall outlet and the interface (I/F)
cable, then route and attach the I/F cable to the scanner. Verify
operation by presenting known-good bar codes to the scanner.
The unit should beep1and/or flash its good read LED and send
the bar code data to the host or terminal. If not, refer to the Trou-
bleshooting section of this guide.
Scanner installation is complete.
I/F Cable
Connect
Here A/C Adapter
(if needed)
For 220-230 VAC
adapters, the
cord must be
facing down as
shown in the
illustration. If
installed upwards,
it will pose an
undue strain on the
socket outlet.
To Host/Terminal
The Magellan 1100i utilizes illumix™ intelligent illumination tech-
nology to optimize light levels for a variety of bar code scanner
functions including automatic reading of bar codes from printed
surfaces, mobile devices and image capture in variable contrast
environments.
1. Beeper and LED behavior is selectable and may have been disabled by a
previous user.

2 Magellan™ 1100i
Optional Stand
An optional stand is available for the scanner which can be per-
manently attached to a wall or countertop. After locating the
stand in an optimal position, the scanner (along with the stand)
can be detached for portable use by lifting the entire unit as
shown below.
How to Scan
Bar codes can be presented to the scanner while it is resting on
the counter or in the optional stand, or the scanner/mount can
be lifted and held as shown.
*Optional Stand
Optional Scan Button Shown

Quick Reference Guide 3
Targeted Scanning Mode
In order to read a bar code (button option only)...
• press and hold the scan button. An aiming pattern will
appear.
• with the aiming pattern fairly centered over the bar
code to be read, release the button to read the label.
The scanner will not read bar codes while the button is pressed.
Targeted Scanning Mode will read bar codes in any orientation.
The scanner will return to full pattern Omni Mode after a con-
figurable time has elapsed.
NOTE

4 Magellan™ 1100i
Troubleshooting
If the scanner is not operating properly, the following checks
should be performed:
1. If the scanner uses an external power supply and the exter-
nal power supply has failed, the scanner will not operate.
Exchange the power supply with a known good power sup-
ply and retest operation.
1
2
4
Product
Reference
Guide
5
3
2. Verify the interface cable is securely attached to the host.
Consult your technical support personnel or refer to your
host system manual to verify the proper connection for the
scanner.
3. Verify that the interface cable is securely attached to the
scanner.
4. Check that the bar codes are of sufficient quality to be recog-
nized by the scanner. Wrinkled, smudged, or torn labels can
cause the scanner to not read at all. Scan known-good labels
of an active symbology1to check the scanner's read opera-
tion.
5. Ensure that the scanner's interface type is compatible with
the host terminal by consulting your POS system manual
and/or the Product Reference Guide.
If the scanner still does not function properly, contact your local
supplier or Datalogic Customer Support Services.
1. Reading of the various bar code symbologies can be independently enabled
or disabled in the scanner.

Quick Reference Guide 5
Guida Rapida
La presente guida vi aiuterà ad eseguire un'installazione rapida
ed efficace. Per ulteriori dettagli, inclusi i dettagli relativi alla pro-
grammazione, consultare la Guida di Riferimento del Prodotto,
che può essere consultata online e scaricata dal sito di Datalogic
indicato sul retro del presente manuale.
Installazione
Svolgere il cavo d'interfaccia dal terminale o host. Inserire l'even-
tuale adattatore CA nella presa a parete e nel cavo d'interfaccia
(I/F), quindi collegare il cavo I/F allo scanner. Verificare il funzion-
amento facendo leggere allo scanner dei codici a barre dei quali si
conosce il contenuto e in buono stato. L'unità emettera un
suono1e/o farà lampeggiare il LED che segnala la corretta lettura
del codice e invierà i dati del codice all'host o al terminale. In caso
contrario, consultare la sezione "Risoluzione dei problemi" della
presente guida.
L'installazione dello scanner è completa.
Cavo d'interfaccia
Collegare
qui
Adattatore C
(se necessario)
All'host/terminale
Il cavo degli
adattatori 220-230
VCA deve essere
posizionato verso il
basso come
indicato
nell'illustrazione. In
caso contrario
l'uscita della presa
di corrente sarà
sotto sforzo.
Il Magellan 1100i usa la tecnologia di illuminazione intelligente
illumix™ allo scopo di ottimizzare i livelli di luce in molteplici fun-
zionalità dello scanner inclusi: lettura automa tica di codici a
barre da superfici stampate, dispositivi mobili e image capture in
ambienti con contrasto variabile.
1. È possibile selezionare suono oppure LED. Tenere conto della configurazi-
one impostata dall'utente che ha utilizzato lo scanner in precedenza.

6 Magellan™ 1100i
Supporto Opzionale
È disponibile un supporto opzionale che può essere attaccato
permanentemente alla parete o sul bancone. Dopo aver posizion-
ato il supporto in posizione ottimale, lo scanner e il supporto pot-
ranno essere staccati per l'utilizzo mobile sollevando l'intera
unità come illustrato in basso.
Come utilizzare lo Scanner
È possibile presentare i codici al lettore, mentre è posizionato sul
bancone oppure inserito nel supporto opzionale, oppure lo scan-
ner può essere sollevato come da illustrazione.
*Supporto opzionale
Pulsante opzione