DaVinci IQC User manual

PRECISION HERBAL INHALER

Built Responsibly Since 2012

CLEAN FIRST™ TECHNOLOGY
DaVinci promises to build with only
the cleanest componentry. No metals
or plastics are used in our sealed
zirconia/glass airpath providing
purity to the connoisseur.
WELCOME TO THE
DAVINCI FAMILY!

KNOW YOUR IQC
1Mouthpiece
2Zirconia “Flavor Chamber”
Vapor Path
318650 Battery
4Onboard Pick Tool
5LED Display
6Control Button
7Up / Down Navigation
Buttons
8“Pearl” Zirconia Adjustable
Spacer
9Glass Lined Ceramic Oven
Access
3 2
1
6
4
7
9
8

Included: 1x IQC device, 1x 18650 (in device), 1x
Battery tab (in device), 2x stickers, 1x user's manual,
1x 10mm water adapter, 1x 10mm water adapter
gasket, 1x extra pick tool, 3x alcohol wipes, 1x
brush tool with plastic handle, 1x 3-ft braided nylon
USB (male) to Type-C (male) cable.

6
GETTING STARTED
Open the IQC’s bottom lid to reveal the glass
lined ceramic oven. Pack herb tightly for
maximum vapor.
Close the bottom lid to allow the
pearl to firmly pack the herb.

7
Power IQC on/off by clicking
the control button five times.
Adjust the temperature
up and down using the
navigation buttons. Choose
from the four preset ranges
called Smart Paths™. IQC
is programmed to start in
Smart Path 3 (390-410°F).
IQC will vibrate when target
temperature is reached.
x 5

8
SMART PATH™ MODE
The Smart Paths™ are preset temperature
experiences that will gradually increase
the temperature over an 8 minute session.
Switch between Smart Paths™ by pressing the
up or down buttons while in Smart Path™ mode.

9
IQC shown in Smart
Path 3
REST
Start temp 410°F / 210°C
End temp 430°F / 221°C
BODY
Start temp 390°F / 199°C
End temp 410°F / 210°C
MIND
Start temp 370°F / 188°C
End temp 390°F / 199°C
FLAVOR
Start temp 350°F / 176°C
End temp 370°F / 188°C

10
IQC shown in
Precision Mode
at 375°F
then,
or
x 1