
TEKLITE TUBIE 285 INSTRUCTIONS
1
STRAPS AND HARDWARE INCLUDED
a. Frame straps, 189 x 19 mm (x2)
b. M5 x 16 mm button flange bolts (x2)
TEKLITE TUBIE 285 INSTALLATION INSTRUCTIONS:
A. MOUNTING BAG USING STRAPS
With the Velcro facing towards the bag, feed the round end of a frame
strap through one of the slots on the bottom of the bag. Repeat with the
second frame strap. Figure A.
Position the bag on whatever main frame tube or seatpost that will be
safe, and where the bag will not interfere with any rotating or moving
part of the bike. Wrap the strap around the tube and thread the end
through the buckle. Pull the strap tight and push the hook end of the
Velcro into the soft loop surface of the strap ensuring a secure fasten.
Repeat with second strap. Figures B & C.
Figure CTop tube bag installation using straps
Figure A
Figure B
TOOLS REQUIRED
4 mm Hex Wrench
Torque Wrench
1.1 Nm
PLEASE COMPLETELY UNDERSTAND ALL USER INSTRUCTIONS AND SAFETY INFORMATION BEFORE USING THIS PRODUCT. AS WITH ANY HIGH TECH PRODUCT
YOU WILL NEED TO ROUTINELY CHECK FOR LOOSE HARDWARE, CRACKS OR OTHER DAMAGE AND REPLACE ITEMS AS NECESSARY. DO NOT USE PRODUCT IF
ANY OF THESE CONDITIONS EXIST.