DisplayIt - VGA Splitter
Distribution of VGA Signals to multiple monitors
DisplayIt is composed of a transmitter and a receiver unit. The transmitter unit is connected to the
HD15 video port at the computer and the receiver unit to the HD15 port of the remote monitor. Both
units are connected through CAT 5 / 6 cables up to 125m. If more than two monitors are needed,
a cascadable 8 Port Line Splitter can be connected. The receiver is available as a dual receiver version to
connect two monitors to one receiver to save cost and reduce cabling.
Daxten Limited
5 Manhattan Business Park
Westgate
London W5 1UP
Tel: 020 8991 6200
Fax: 020 8991 6299
Part No.
1025-101K DisplayIt Single Screen Kit
1025-102K DisplayIt Dual Screen Kit
1025-108 DisplayIt 8 port Line Splitter
1025-101T DisplayIt Transmitter
1025-101R DisplayIt Single Screen Receiver
1025-102R DisplayIt Dual Screen Receiver
www.daxten.com
Technical Specifications
Connectors:
Transmitter / Receiver - HD15
Line Splitter - RJ45
Max. Resolution up to 1600 x 1200,
depending on distance
When using a Line Splitter, power supplies
are not necessary on the remote side
Video signals: Analogue Signal Red, Green,
Blue, 0.7v p-p 75 Ohm
Operating Temperature: 5°C to 40°C
Storage Temperature: -40°C to 70°C