Decatur Electronics Genesis VP Directional User manual

Genesis VP
Directional™
User’s Manual


Genesis VP
Directional™
User's Manual

This manual is the most current version
and supersedes all other manuals.

Table of Contents
Welcome to Decatur Electronics ...........................................6
Introduction ..............................................................7
About This Manual ........................................................7
1 Quick Start ...........................................................8
1.1 Initial Set Up ......................................................8
1.1.1 Insert the Batteries ..............................................8
1.1.2 Control Panel Functions .........................................9
1.2 Trigger Operation .................................................9
1.3 Measuring a Target Speed .........................................9
2 Components .........................................................9
2.1 Batteries ..........................................................9
2.1.1 Removing Batteries ............................................11
2.1.2 Battery Charger................................................11
2.2 Controls .........................................................12
2.3 Display . .........................................................13
2.3.1 Number Segments .............................................13
2.3.2 StatusIndicatorIcons..........................................13
2.4 Trigger . .........................................................14
2.5 Mounting Configurations . .......................................15
3 Operating Modes ....................................................15
3.1 Primary Menu ...................................................16
3.2 Secondary Menu.................................................17
3.3 Directional.......................................................19
3.4 Strongest Signal Mode ...........................................20
3.5 Faster Mode .....................................................20
3.6 Faster Toggle Mode ..............................................21
3.7 Faster Hold Mode ................................................21
4 Serial Output Mode ..................................................22
5 Performance Tips.....................................................23
5.1 How Radar Works ................................................23
5.2 Interference Sources .............................................23
5.2.1 Angular Interference (Cosine Effect) ............................23
5.2.2 Fan Interference ...............................................25
5.2.3 Electromagnetic Interference (EMI).............................25
5.2.4 Feedback Interference .........................................25
5.2.5 Multi-Path Beam Cancellation ..................................25
5.2.6 Radio Frequency Interference (RFI) .............................25
5.2.7 Scanning......................................................25
6 Testing the Device ...................................................26
6.1 Operator-Requested Self Test.....................................26
6.2 Mini-Test ........................................................26
7 Care, Cleaning, and Storage ..........................................26
8 Specifications .......................................................27
8.1 Antenna Parameters .............................................27
8.2 Voltages .........................................................27
8.3 Speed Range Parameters.........................................27
8.4 Power Consumption Parameters .................................28
8.5 Accuracy ........................................................28
9 Legal Requirements ..................................................29
9.1 FCC Document ..................................................29
10 Frequently Asked Questions (FAQ) ....................................30
11 Service .............................................................31
11.1 Warranty ......................................................31
11.2 Service Return Procedure ......................................32
12 How to Order Additional Products ....................................33
User Notes .............................................................34

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
Welcome to Decatur Electronics, Inc.
Thank you for choosing the Decatur Electronics Genesis-VP
Directional ™ — A highly advanced traffic radar unit that will reward
your department with years of dependable service. The Genesis-VP
Directional design incorporates high performance and long range,
with many leading features. We urge you to study this manual before
using the Genesis-VP Directional, so you can maximize the benefits
of this sophisticated radar device. We believe you will be pleasantly
surprised by the features and advantages.
The Genesis-VP Directional is small, dependable, features instant
target acquisition, and is designed using a quality management
system certified to ISO 9001. If you are as pleased with its
performance as we think you will be, ask your Decatur sales
representative about other Decatur products including the Genesis™
line of radars, the Onsite™ line of speed trailers, dollies, and pole signs
and the Responder™ line of in-car video systems.
Traffic officers told us exactly what they wanted in a radar device -
and we built it. Try any one of our products and see if you don't agree
that it is the best-in-class!
—The Management and Staff at Decatur Electronics,
The Nation’s Oldest Radar Company
25/Aug/2010
Introduction
The Genesis-VP Directional (Genesis-VPD)™gives you the option to
easily select and track vehicles approaching, receding, or moving in
both directions simultaneously from your position.
Directionality dramatically enhances the target selection process.
For example, if the radar is set in toward (t) mode, it will track only
vehicles coming toward the radar and ignore all vehicles moving
away from it!
About This Manual
This manual contains valuable information to help you set up, use
and maintain your Genesis-VPD, so you can extend its life and keep it
at peak performance. Please take a moment to read through it, and
keep it handy for future reference.

Indicates a warning message about safety
precautions. Please read it carefully.
Indicates a helpful tip or precaution to note.
25/Aug/2010
6 7

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
1. Quick Start
If you are already familiar with operating and using police radar guns,
you probably will want to follow the quick start instructions.
1.1 Initial Set Up
1.1.1 Insert the Batteries
Remove the Black & Decker® VersaPak™ batteries from their
package and charge them according to the VersaPak™instruction
sheet. See section 2.1.2: Battery Charger for more information
about using the battery charger. After charging the batteries,
insert them into the handle grip.

Insert the batteries into the handle grip.
Push the batteries into the receptacles in the bottom of the handle
until you hear them snap into place.
25/Aug/2010
1.1.2 Control Panel Functions
The factory default settings for the control panel are:
Default
dir Direction tA
bL Backlight On
Aud Audio volume 3
SEn Sensitivity 5
SLh Squelch On
1.2 Trigger Operation
The Genesis-VPD transmits and receives microwave energy when
you pull the trigger. When you want to lock onto a speed, release
the trigger, then pull it again within 1/2 second. The speed in the left
window will move to the right window and flash alternately between
it and a directional indicator (t means the target vehicle is moving
toward you, and A means away.) The locked speed clears when you
pull the trigger again.
1.3 Measuring a Target Speed
The Genesis-VPD operates in Strongest Signal mode, which is the
default. If you have purchased Faster Target software, you can select
the Faster mode of operation with the FAST button. In Faster mode,
the Genesis-VPD can operate in Faster-Toggle or Faster-Hold setting,
which you select in the secondary menu. See section 3: Operating
Modes for more information.
2. Components
2.1 Batteries
The Genesis-VPD comes with a Black & Decker®Interchangeable
Battery System: two nickel-metal-hydride (NiMH), gold label, 3.6-volt
VersaPak™batteries and a two-port AC charger. Please read all the
instructions and warnings on the VersaPak™ instruction sheet to
ensure proper use and storage of your batteries.
25/Aug/2010
8 9

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
       
          
         
      
Use the battery caps provided with the batteries to store or carry
them, so metal objects (keys, coins, etc.) can not come in contact
with the exposed metal end. Remember to remove the caps before
placing the batteries in the charger or the Genesis-VPD.
If the device is idle for 30 minutes, it automatically powers down to
save the batteries. The batteries have a minimum life of 300 charge
cycles. You can purchase additional batteries at hardware stores and
from Decatur Electronics.
• When the radar is transmitting, it consumes roughly
three times as much power from the batteries than
when it is not transmitting. Keep this in mind to
maximize battery life.
•The device draws asmall amount of power from the
batteries even when the power is off. When you are
not using the device for extended periods, remove the
batteries to save the charge.
WARNINGS
• IMPORTANT: Do not combine a NiCd (silver label)
battery with a NiMH (gold label) battery in the same
gun. It can damage the batteries.
• IMPORTANT: Using batteries that have mismatched
voltages, such as one battery fully charged and another
with low voltage can cause the device to incorrectly
power up.
• Never attempt to open abattery. If the housing breaks
or cracks, immediately discontinue its use, and do not
recharge
• Do not incinerate the batteries. They may explode.
If you have problems or questions about your batteries,
contact Decatur Electronics at 800.428.4315, Black & Decker® at
800.54.HOWTO, or a local Black & Decker®service center (see the
Tools Electric section in the Yellow Pages).
2.1.1 Removing Batteries
To remove the batteries, press the red button with your thumb
while pulling on the battery with your fingers.
2.1.2 Battery Charger
Only charge the batteries with the VersaPak™battery charger. It is
normal for the charger to hum and for the batteries and charger
to become warm while charging. If a battery does not charge
properly, check the receptacle to see if it is working or move it
somewhere with a temperature between +5°C and +40°C.
Unplug the charger when it is not in use.
 
25/Aug/2010 25/Aug/2010

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
         
  
2.2 Controls

Faceplate controls.
• When you press the button of avalid function the
system beeps to acknowledge the command.
 The MENU button lets you view the options that you can
change.
 The select (SEL) button lets you choose the settings in each of
the menu options. To change a menu option, press the SEL button.
 When you press the TEST button, the Genesis-VPD runs a self
test. For more on tests, see section 6: Testing the Device.
 When you press the FAST button, the Genesis-VPD enters
Faster target mode.
The PWR button turns the radar on and off. If you press SEL
while pressing power, the factory default settings are restored.
25/Aug/2010
2.3 Display
2.3.1 Number Segments
The three large digits (888) on the left display the vehicle speed.
The three small digits on the right display either the locked speed
or Faster Target speeds. (Figure 2.3.2).
2.3.2 Status Indicator Icons
The following icons can appear at the top and bottom of the
display screen and describe the following conditions:

Number segments and status indicators
 When POWER appears, the power is on.
    Indicates that excess
RFI energy is present. The radar automatically inhibits all speed
measurements. No new speeds display in the display window
or transmit via the serial port while this icon is active, and if the
system is displaying a locked speed, the speed will remain locked.
When the RFI condition no longer exists, the system will resume
normal operation. Possible causes of this condition are the patrol
vehicle’s FM communications proximity to radio stations and other
broadcast equipment.
 Indicates that your batteries are low
on power. The system will not transmit or display any new speeds
while LOW BAT appears.
 The LOCK icon indicates that the speed, previously
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
         
         
displayed on the left window, is now locked and will appear in the
right window.
 Indicates the radar is in Faster mode. When the device is not
in Faster mode, it is in Strongest Signal mode, which is the default
mode.
 Indicates that the Genesis-VPD is transmitting.
 Indicates the system is not transmitting.
 Indicates the radar has detected an internal hardware
error which can affect the operation of the radar device. You should
turn the gun off and back on. If the problem persists, contact
Decatur Electronics at 800.428.4315 for assistance.
 The Genesis-VPD displays speeds in kilometers per hour.
KPH appears in the display.
2.4 Trigger
The radar transmits and receives microwave energy when you pull
the trigger. To measure the speeds of target vehicles, pull and hold
the trigger.
When you want to lock a speed, release the trigger then quickly pull
it again (within 1/2 second). The radar will take the speed in the left
display when the trigger is released, move it to the right display, and
lock it in. The right display will then flash alternately between the
locked speed and a directional indicator, t or A (t means the target
vehicle is moving toward you, and A means it is moving away from
you).
As long as you continue to hold the trigger, the radar will continue to
track targets and display their speeds in the left display. The locked
speed clears when you pull the trigger again.
25/Aug/2010
2.5 Mounting Configurations
The Genesis-VPD is designed for hand-held operation. Optionally,
you can mount it to a standard camera tripod.
3. Operating Modes
The MENU and SEL buttons on the Genesis-VPD control panel lets
you review and change programmable settings. The settings are in
two menus: primary and secondary. When you finish making your
selection(s), release the buttons, and your new settings will be in
effect. The radar gun will remember the settings you last set when it
is turned off and will power up with them.
• If you press and hold the SEL button when powering
up the unit, the system will restore the factory default
settings.
• The Genesis-VPD will exit menu mode if you do not
press the MENU or SEL buttons after two seconds. If
you press and hold either the MENU or SEL buttons, the
Genesis-VPD will remain in menu mode.
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
          

3.1 Primary Menu
You can use the factory default settings listed on the next page or
you can select your own settings. To select a setting, repeatedly press
the MENU button until the setting you want to change appears.
Then press the select (SEL) button to advance through the selections
for that setting. When you have made your selection, release the
buttons and your new settings will be in effect. If neither MENU or
SEL is pressed after 2 seconds, the radar gun will return to normal
operating mode. Table 3.1 show the primary menu setting choices.

Primary menu settings.
25/Aug/2010
 Direction lets you select the direction of the motor
vehicle you want to display. The dir default value t A indicates that
you are monitoring motor vehicles moving both toward and away
from the radar gun.
 This turns on and off the LCD backlight. bL ON is
the default setting.
 The Audio setting controls the volume level of
the Doppler tone. The volume level settings are from 3 to 6 (3 is
minimum and 6 is the highest volume level.)
• Previous versions may have avolume range of 0to 6.
For evidentiary reasons, it is recommended that the
audio level never be muted during normal operation.
  The SEn option lets you control the
maximum target-acquisition range. SEn levels range from 0 through
5 (0 is off, 1 is the minimum range, and 5 is the maximum range.)
 The squelch determines the type of Doppler audio
you want the radar gun to send out. When squelch is on, the sound
is only the Doppler tone for the displayed target. When squelch is off,
you will hear all Doppler tones, including other vehicles, interference
and any noise the antenna receives.
3.2 Secondary Menu
You can use the factory default settings listed on the next page
or set your own. To select the secondary menu settings, press and
hold the select (SEL) button, then press the MENU button. To select
a setting, press and release the MENU button until the setting you
want to change appears. Then press and release the SEL button to
advance through that setting’s options. When you have made your
selection(s), release the buttons and the new settings will be in effect.
If neither MENU or SEL is pressed after 2 seconds, the radar gun will
return to normal operating mode.
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual



Secondary menu settings.
  The Prt setting indicates which
communication port configuration you want the system to use. Zero
means no serial communication, and 1 through 7 are various setting
options (see the menu settings.)
25/Aug/2010
  The FSt setting programs the FAST button
for either Faster-Hold or Faster-Toggle mode. The default, 1, is Faster-
Toggle, and 0 is Faster-Hold.
MINITEST The tSt option sets the system to automatically
perform a “mini”self test every 10 minutes.
3.3 Directional
TM
The Genesis-VPD lets you easily select and focus on vehicles
approaching or receding from your stationary patrol position.

While in directional mode t (towards only), the radar gun does not track
the truck going 88 km/h. It displays the car going 98 km/h.

The directional setting displays tA, t or A
You can change the dir option to t to display only the speeds of
targets coming toward you or A to display only the speeds of targets
moving away from you.
When you are in t A mode, the radar will display a t or an A
depending on the direction the target is traveling. If the radar cannot
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
        
determine the target direction, the direction indicator will not
display. Target direction, t or A, will display in the right window to
indicate the target’s direction.
3.4 Strongest Signal Mode
All radars track the strongest signal, an essential function of tracking
history. The radar defaults to the strongest signal-tracking mode and
will stay in this mode until you press the FAST button. In Strongest
Signal tracking mode, the radar displays the speed of the vehicle with
the strongest return signal, which is often the closest car. This speed
appears in the left window.
3.5 Faster Mode
The advanced signal processing algorithms in the Genesis-VPD
simultaneously track multiple vehicles. In Faster mode, the Genesis-
VPD takes the strongest return signal and uses it as a reference
level. It then looks at the return signal levels from all other vehicles
going faster than the strongest vehicle and compares them to that
reference level. It will display the speed of the vehicle that is moving
faster than the strongest signal and is the next strongest target. In
multiple target situations, the next strongest target going faster than
the strongest is often closest to the strongest vehicle. The FAST icon is
displayed when in faster mode.

The vehicle going 123 km/h is the next strongest
target going faster than the strongest
There are two different Faster target modes: Faster-Toggle mode and
Faster-Hold mode.
25/Aug/2010
3.6 Faster-Toggle Mode
In Faster-Toggle mode you can toggle between Faster and Strongest
Signal targets by pressing the FAST button (the FAST icon is
displayed.)
To switch from Strongest Signal target to Faster target, press and
release the FAST button. The speed of the vehicle returning the
strongest signal will continue to appear in the left window, and the
speed of the next strongest target going faster than the strongest will
appear on the right window. The system will remain in Faster mode
until you press the FAST button again or until you lock a speed, which
automatically switches the gun back to the Strongest Signal target.
• In Faster-Toggle mode, the radar gun locks only the
strongest vehicle speed. After the speed is locked, the
Genesis-VPD reverts to the Strongest Signal mode.
3.7 Faster-Hold Mode
To use to Faster-Hold mode, make sure you have selected Faster-Hold
in the menu (FSt 0). Press and continue to hold the FAST button.
When active, the faster vehicle speed is displayed in the left window.
If there are no faster vehicles, the display will be blank. When you
release the FAST button, the gun will automatically switch back to the
strongest signal.

Strongest Signal mode, Faster Toggle mode, Faster Hold mode
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
          
        
 
      
If you lock the speed of the fast vehicle, the LOCK and FAST icons will
designate that the locked speed is a faster target lock. If these icons
do not appear, the lock is on the strongest target.
4. Serial Output Mode
The Genesis-VPD has an RS232 communications port on the side
panel. Using a custom RS232 communications cable, you can
connect the Genesis-VPD and transmit data to display signs, in-car
video and PCs for recording and analyzing speed data. The serial
communication has the following characteristics (8:n:1) and is
transmit only:
One (1) start bit
Eight (8) data bits
No parity
One (1) stop bit
Transmission at 1200 baud
The unit transmits data as ASCII symbols in the following digit
sequence:
ASCII [hundreds][tens][ones]
Carriage return<CR>
(<CR> = ASCII decimal value 13)
The radar unit sends the data in this sequence when the TARGET
speed display changes. When you press the LOCK button, the radar
transmits the following digital sequence:
[hundreds][tens][ones]<CR>
(<CR> = ASCII decimal value 13)
25/Aug/2010
5. Performance Tips
Understanding potential radar interference and what to do when it
occurs can greatly increase the radar’s performance.
5.1 How Radar Works
Determining a vehicle’s speed begins with the radar gun transmitting
a beam of microwave energy (radio waves) at an approaching or
departing target vehicle. When energy from this beam strikes a
vehicle, a small amount of the beam is reflected back to the antenna.
The reflected signal frequency shifts by an amount proportional to
the speed of the target vehicle. This is known as the Doppler effect.
The radar device then determines the target vehicle speed from the
difference in frequency between the reflected and transmitted signal.
5.2 Interference Sources
When properly installed and operated, Doppler radar technology
is accurate and reliable. However, variations in the environment
can cause situations and circumstances which can cause spurious
responses which are readily identified by a qualified operator. Signs
that a speed is spurious can include the following characteristics:
• Avalid target motor vehicle speed in the operational range will
always override the source of interference and will be confirmed
by the audio component. (See Sections 5.2.2 through 5.2.7.)
• The Doppler tone will lack the pitch and clarity component..
• Speeds are irregular.
• Speeds appear to track with the engine speeds.
5.2.1 Angular Interference (Cosine Effect)
The Cosine Effect causes the system to display a speed which is
lower than the actual vehicle speed. This condition occurs when
the targeted motor vehicle’s path is not parallel to the antenna,
including conditions such as the motor vehicle traveling on a curve
or a hill.
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
As the angle between the beam of the antenna and the targeted
motor vehicle increases, the displayed speed decreases. Ideally,
an angle of zero degrees (0°) is preferable, because the displayed
speed is the actual targeted motor vehicle speed. However, in all
uses of police radar, the radar device is always at a slight angle to
the targeted motor vehicle to avoid collisions.
Velocity
Vector
Angle
Radar

An angle between the antenna and the target vehicle causes the cosine effect.
The following table shows the effect that an increasing angle has
on a displayed speed.
Horizontal Angle Degrees
Actual
Speed
0° 1° 3° 5° 10° 15° 20° 30°
Displayed speed:
45° 60° 90°
50 km/h 50 49 49 49 49 48 46 43 35 25 0
65 km/h 65 64 64 64 64 62 61 56 45 32 0
80 km/h 80 79 79 79 79 77 74 69 56 40 0
90 km/h 90 89 89 89 88 86 84 77 63 45 0
100 km/h
100 99 99 99 98 96 93 86 70 50 0
110 km/h
110 109 109 109 108 106 103 95 77 55 0

Actual and displayed speeds at different antenna-to-target angles.
25/Aug/2010
Small angles (less than 10°) have little effect on accuracy. As the
angle increases, the displayed speed decreases. At 90°, the target
speed is 0—grossly incorrect. Cosine Effect will always result in a
target speed being displayed that is less than the actual speed of
the moving motor vehicle, which will always be advantageous to
the motorist.
5.2.2 Fan Interference
Fan interference is the most common form of interference that you
are likely to experience. It is caused when the radar measures the
speed of the vehicle blower fan. Changing the fan speed causes a
proportional change in the display speed.
5.2.3 Electromagnetic Interference (EMI)
Operating electric motors can produce EMI. With the DSP
algorithms the Genesis-VPD has eliminated this.
5.2.4 Feedback Interference
When the radar beam is directed at computer screens, streetlights,
and other electronic devices, it can display spurious speeds. To
correct the interference, relocate the radar gun antenna.
5.2.5 Multi-Path Beam Cancellation
The Genesis-VPD is immune from multi-path cancellation.
5.2.6 Radio Frequency Interference (RFI)
The Genesis-VPD contains an RFI detection circuit that detects
excess radio frequency energy. When stray radio frequency energy
reaches an excessive level, the system displays an RFI message
and stops processing and displaying speeds. The system resumes
normal operation when the RFI condition no longer exists. At that
time, any locked speeds will display again.
5.2.7 Scanning
The Genesis-VPD is designed to be used while attached to a solid
mount or hand-held in a steady position. Moving or“scanning” the
antenna past stationary objects can cause the system to detect
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual


 
         
          
             
              
motion. Obtaining a speed reading from scanning will not happen
when you properly use the radar.
6. Testing the Device
6.1 Operator Requested Self Test
Pressing the TEST button initiates a comprehensive system self
test, which checks the numeric displays and runs a target speed
simulation. The self test checks:
  Allows the operator to verify that the digit segments
and status LED lights are working correctly and that none of the
pixels in the number segments are burned out.
  The system checks the internal circuitry. If the unit
passes all internal checks, the messages PASS will be displayed. If an
error should occur then FAIL will appear in the display window.
   The radar verifies speed accuracy using
synthesized Doppler frequencies corresponding to a series of four
simulated speeds: 25, 50, 75, and 100 km/h.
• Section 6.1 must be completed by the ocer prior to
enforcement and at the conclusion of the officer's tour
of duty (if any enforcement action was taken).
6.2 Mini-Test
The tSt option sets the system to automatically perform a “mini” self
test every 10 minutes.
7. Care, Cleaning, and Storage
•Avoid spilling food, beverages and other liquids on the radar
device.
25/Aug/2010
• When you are not using or transporting the device, store it in its
original packaging.
• To clean the radar device, dust it with asoft clean cloth, which is
free of cleaning solutions.
8. Specifications
8.1 Antenna Parameters
K-Band
IACP Type III
Nominal transmission frequency 24.150 GHz
Nominal horizontal beamwidth 12°
Polarization Linear (Vertical)
Nominal microwave power output 7 mW
Maximum aperture power density <1 mW/cm2

Ambient operating temperatures -30 C to +70 C
Maximum humidity 90% relative humidity
(non-condensing) at 37°C
Water resistance meets International Robustness Standard IEC
529:1989 and European Community Standard EN 60529 Classification
IP55. These set international standards for immunity from damage by
solid protrusions and water.
8.2 Voltages
Supply voltage 6.2VDC - 8.0VDC
Low voltage threshold 6.2VDC
8.3 Speed Range Parameters
Speed Display Ranges Minimum Maximum
km/h 8 320
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
8.4 Power Consumption Parameters
Supply voltage range 6.2VDC – 8.0VDC
Nominal current draw in various modes:
(K-Band)
Standby (antenna off)
Antenna ON
0.23 amperes
0.35 amperes
(no targets displayed)
Antenna ON 0.39 amperes
(“55” target displayed)
Antenna OFF 0.24 amperes
(segment check“888 888”)
Antenna ON 0.34 amperes
(segment check“888 888”)
8.5 Accuracy
The speed calculations of any radar Decatur Electronics produces are
100% accurate. The display precision is as folows:
± 1 unit of measure in stationary mode of operation
25/Aug/2010
9. Legal Requirements
9.1 FCC Document
FEDERAL COMMUNICATIONS COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION
Certification
Decatur Electronics Inc Date of Grant: 02/28/2000
715 Bright Street
Decatur,IL 62522 Application Dated: 12/21/1999
Attention: Randall Sanner
NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID
ONLY for the equipment identified hereon for use under the Commission’s Rules and
Regulations listed below.
FCC IDENTIFIER HTRCR-1KD
Name of Grantee Decatur Electronics Inc
Equipment Class: Part 15 Field Disturbance Sensor
Notes: Traffic Safety Radar
Grant Notes FCC Rule Parts
15
Frequency
Range (MHZ)
24075 - 24175
Output
Watts
Frequency
Tolerance
%
Emission
Designator
Mail To:
EA96328
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual

10. Frequently Asked Questions (FAQ)
Q. My radar gun will not power up. What should I do?
A. Check the batteries to make sure they are charged and working
properly. Over time battery performance will diminish and the
batteries will need to be replaced. Once you have verified that
the batteries are good and your radar still does not power up,
call Decatur Electronics at 800.428.4315.
Q. My radar gun has poor range. How can I remedy this?
A. Verify that the antenna has no obstructions in front of it. If the
gun still has poor range, increase the sensitivity level (SEN). If you
still have this problem, contact Decatur Electronics.
Q. Will my radar work while my vehicle is moving?
A. No, the Genesis-VPD radar gun is a stationary only models, so
your motor vehicle should be parked. You need to hold the radar
steady while operating it.
Q. What if I drop my gun?
A. The unit is extremely durable. Simply power up and perform
device test. If the gun doesn’t appear to work properly, contact
Decatur Electronics.
Q. Does Decatur Electronics carry other law enforcement
products?
A. Yes, the Genesis™ series of radars - GHD™, Scout™, and the
Genesis II Select™ and Genesis II Directional™dash-mount
moving radar products, and Responder™ series of in-car video
solutions and the OnSite™ line of radar speed trailers.
25/Aug/2010
11. Service
11.1 Warranty

Decatur Electronics, Inc. guarantees the Genesis-VPD to be free
from defects in workmanship and material and to operate within
specifications for a period of two years. During this period, Decatur
Electronics will repair or replace, at its option, any component found
to be defective, without cost to the owner, providing you return the
unit to the factory or to a Decatur authorized warranty service center.
The full warranty on parts and workmanship does not include
normal wear and tear, crushing, dropping, fire, impact, immersion,
over-tightening of screws or damage from attempted repair or
modifications by unauthorized service agents.
For repairs, simply return the unit (transportation prepaid) directly to
the factory or to a Decatur authorized warranty service center. Refer
to Section 11.2: Service Return Procedure.

If you purchased the unit under a special buying program, such as a
province purchase contract, etc., the above warranty may not apply.
Please refer to the buying program contract for the appropriate
warranty terms or contact Decatur Electronics.
I
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual Genesis-VP Directional™ User’s Manual
       
          
         
          
         
11.2 Service Return Procedure
If you have questions, want a quick problem diagnosis, or need to
return your Genesis-VPD to the factory:
• Call Decatur Electronics Customer Service (or the approved
Canadian repair depot) and ask to speak with a Customer Service
Representative. Have the serial number of the radar unit ready.
Phone: [phone]
If you need to return your radar unit to Decatur Electronics:
• Ask to arrange for aReturn Authorization Number. You will need
to give the serial number of the radar that is to be serviced. The
serial number is located on the back of the main computer unit.
• Return ALL of the Genesis-VPD parts in the original packaging
(transportation prepaid).
• If so directed, include anote describing the problem and/or the
incident that resulted in the problem. Failure to do so can delay
the return of your radar device.
• Based on the information that you have given, the Customer
Service Representative will issue you a return authorization (RA)
number. Write the RA number on your note and shipping label.
The customer is responsible for the shipping charges to send the
system to Decatur Electronics, Inc.
If we receive a system from a customer COD that is still under
warranty, we will charge the customer for the amount of COD freight
charges plus an additional 10% for handling after we repair the
system. Also, we will add COD and a 10% handling fee to the repair
bill for out-of-warranty repairs.
25/Aug/2010
The customer is responsible for all shipping charges to the Decatur
service location. Decatur does not accept incoming COD shipments.
Decatur Electronics will pay the freight (up to $10.00 US) for shipping
the system from the repair facility to the customer, provided the
system is still under warranty. We will charge the customer for any
shipping charges above the initial $10.00. If you want to ship your
package express or next day air, we will invoice you for these freight
charges.
If your radar is out of warranty and you would like to know the cost
of repair prior to the actual repair work being performed, Decatur
would be happy to give you a repair estimate. To obtain an estimate,
request it either on the paperwork you submit with the radar
device when you send it in for service or when you obtain a Return
Authorization (RA) number. Decatur provides estimates only upon
request.
There is an initial charge for an estimate if your radar gun is not
under warranty, plus the return shipping and handling fees. If, after
reviewing the estimate cost, you decide not to have your radar
repaired, you will be invoiced the minimum service charge plus
return shipping costs.
12. How to Order Additional Products
You can order upgrades to the Genesis-VPD (when available) as well
as cases, tripods, etc. To see product descriptions or order products,
visit our web site at www.DecaturElectronics.com or call the sales
office at 800.428.4315.
25/Aug/2010
 

Genesis-VP Directional™ User’s Manual

25/Aug/2010


www.DecaturElectronics.com
3433 East Wood Street, Phoenix, Arizona 85040, USA
800.428.4315 |217.428.4315 |Fax [phone]