Decorotika Anemon User manual

Assembly Instructions

2
Valued Customer,
We design and carefully manufacture our
products for our customers, We wish that our
customers to have fun while they are doing
their new furniture
The product you just purchased was subjected
to all sorts of tests and controls before sending
out to you.
Hope you enjoy your new furniture.
Before starting, please check all
components and accessories
according to the provided list. If
you purchased more than one
product, to prevent confusion, be
sure that you completed the first
product, then start the next one.
Please make sure that you select
correct numbered part and use
specific connector to assemble.
We do not recommend any
modification or rotation in assembly.
Please follow the manual carefully.
Furniture parts are going to several
manufacturing procedures. During this
process, parts can have little dust or
marks. Please clean the parts with
dump cloth before assembly to get
the best result. Usual cleaning would
be suffice.
Although all products are carefully
manufactured and packed, sometimes we
experience damage during transportation. In
such cases, please check the damaged part,
note the part number written on the part and
do not hesitate to contact us
Do not use your furniture for out of
purposes. If you would like to use it
out of purpose or would like to do
some modification or rotation, please
contact us for more details.
Please do not expose your furniture
with excessive heat, cold and
humidity because product can be
affected negatively.
If you need your product to mount on the wall,
Please use sutable rawlplug for your wall type.
We send you rawlplugs sutable for
concrete and brck walls.

3
Part#1 1x
Part#2 1x
Part#3 1x
Total 5x
1
Disassembled Parts
2
3
Part#41x
Part#51x
4
4
5

4
Tools & Installation Components
8x
A19 3,5x18 SCREW
6x
A21 Q15 FELT
2x
A20 AKB m6x40
4x
A22 m6x15 ysb SCREW

5
A19
1
2
A19

6
A20
A22
3
4
Please leave the A20 bolts loose so that you
can nstall the crossbars easly n the next step

7
5
A21

• This unit contains small parts which could be a choking hazard for small children.
Children should be under adult supervision at all times.
• Do not overload the unit. Each shelf has a recommended capacity of 13 pounds, and the
total weight on the unit should not exceed 39 pounds for wall shelves.
• Do not climb, step, or stand on the unit.
• Do not mount or atach items to the front, rear, or sides of the unit. This can cause the
unit to become unbalanced and fall.
• Do not stack units.
• All units must be secured individually to wall studs using hardware provided. If wall
studs are not accessible, consult your local hardware store for appropriate mounting
hardware.
• We recommend you hand-tighten screws. Use care not to overtighten if using power
tools. Follow proper safety procedures if using power tools and/or ladders.
• We recommend you protect your work surface during assembly to prevent scratching or
damage to tabletops, wood floors, etc.
• Failure to follow the instructons listed here could result in bodily injury or damage to
personal belongings. Use caution and follow safety procedures.