Decorotika Elzen User manual

assembly guide
Elzen Computer Desk
1

e-mal : sales@decorotka.com
The US Phone : [phone] Workng Hours: Mon- Fr (09 am - 05 pm)
EUROPE Phone : [phone] Workng Hours: Mon- Fr (07 am - 05 pm)
introduction
Valued Customer,
We design and carefully manufacture our
products for our customers, We wish that our
customers to have fun while they are doing
their new furniture
The product you just purchased was subjected
to all sorts of tests and controls before sending
out to you.
Hope you enjoy your new furniture!!!
Before starting, please check all
components and accessories
according to the provided list. If
you purchased more than one
product, to prevent confusion, be
sure that you completed the first
product, then start the next one.
Please make sure that you select
correct numbered part and use
specific connector to assemble.
We do not recommend any
modification or rotation in assembly.
Please follow the manual carefully.
Furniture parts are going to several
manufacturing procedures. During this
process, parts can have little dust or
marks. Please clean the parts with
dump cloth before assembly to get
the best result. Usual cleaning would
be suffice.
Although all products are carefully
manufactured and packed, sometimes we
experience damage during transportation. In
such cases, please check the damaged part,
note the part number written on the part and
do not hesitate to contact us
Do not use your furniture for out of
purposes. If you would like to use it
out of purpose or would like to do
some modification or rotation, please
contact us for more details.
Please do not expose your furniture
with excessive heat, cold and
humidity because product can be
affected negatively.
2

or
o
before you start
Do not install the product on rough surfaces.
Get required installation tools prepared.
Get help from someone else!
3

components
A09
10x
3.5x30 mm screw M6x40 mm screw
A10
6x
1
Part1 1x
Part2 2x
Part3 3x
TOTAL 7x
3
3
2
2
4
Part4 1x
4

A10
step a
*Please attach all the metallc peces #2 onto the holes on the metallc pece #2 as shown below
*Then please screw A10 (M6x40 mm screw) wth the help of a spanner
*Please attach the metallc pece #4 onto the holes on the metallc pece #2 as shown below
*Then please screw A10 (M6x40 mm screw) wth the help of a spanner
1
2
2
3
3
4
5
6x

A09
10x
1
2
2
4
step b
*Please attach the wooden pece #1 onto the top of the furnture as shown below
*Then please screw A09 (3,5x30 mm screw) wth the help of a screwdrver.
2
3
3
6

Enjoy your Decorotka product!
contact@decorotka.com www.decorotka.us
www.decorotka.com
final look
7