Decorotika Arya TV Stand User manual

TV Stand
Assembly Guide

02
Valued Customer,
We design and carefully manufacture our
products for our customers, We wish that our
customers to have fun while they are doing
their new furniture
The product you just purchased was subjected
to all sorts of tests and controls before sending
out to you.
Hope you enjoy your new furniture!!!
Before starting, please check all
components and accessories
according to the provided list. If
you purchased more than one
product, to prevent confusion, be
sure that you completed the first
product, then start the next one.
Please make sure that you select
correct numbered part and use
specific connector to assemble.
We do not recommend any
modification or rotation in assembly.
Please follow the manual carefully.
Furniture parts are going to several
manufacturing procedures. During this
process, parts can have little dust or
marks. Please clean the parts with
dump cloth before assembly to get
the best result. Usual cleaning would
be suffice.
Although all products are carefully
manufactured and packed, sometimes we
experience damage during transportation. In
such cases, please check the damaged part,
note the part number written on the part and
do not hesitate to contact us
Do not use your furniture for out of
purposes. If you would like to use it
out of purpose or would like to do
some modification or rotation, please
contact us for more details.
Please do not expose your furniture
with excessive heat, cold and
humidity because product can be
affected negatively.
introduction

or
03
o
Do not install the product on rough surfaces.
Get required installation tools prepared.
Get help from someone else!
before you start

04
Part1 1x
Part2 1x
Part3 1x
Part4 1x
Part5 1x
Part6 1x
Part7 1x
Part8 1x
TOTAL 17x
Part9 2x
Part10 2x
Part11 1x
Part12 2x
Part13 1x
Part14 1x
28x 28x
18x
Minifix M10
Minifix k18
A02
A09
3,5x16
A03
12 mm
A10
c 1
18 mm
A06
c 1 8x
28x
A18
C02
d1
C01
4x
4x
Nail
35x
A08
Ø8
A14
2x
1
2
3
4
5
6
7
8
9
9
10
10
11
12
12
13
14
A25
2x
A26
5x 12x
A27
3,5x30
1x 8x
4 sw
A12
A12
50 mm
A13
2x
A11
4x50
components

1
a. installing components
First, you need to place A02 and
A03 to specified location as seen
in the model. Make sure that A02
and A03 correctly placed to wood
parts numbered as shown
Secondly, as shown in the below
model, insert the parts in together
according to the directions shown
in the model. Make sure, parts
are fully inserted, then, turn the
screw right as shown below
small screw diagram
2
b. installing components
Please take wood part no 6 and no 4 and
place the component A02 and A03 to places
shown in the model. Make sure positions are
exactly same in the model.
Secondly, as shown in the below
model, insert the parts in together
according to the directions shown
in the model. Make sure, parts
are fully inserted, then, turn the
screw right as shown below
small screw diagram
1
2
3
7
A02A04A03
A02A04A02
1
2
3
7
A02A04A02
A02A04A03
4
6
05
4
6

c. inserting shelf to the cabinet
In first 2 steps, you have completed the
installation of base and shelf that needs
to be assembled inside of the base.
Now, you will Insert the shelf in to
cabinet. Stick to the model, please
insert the shelf according to given
directions. Make sure direction is
correct. Then screw with the A13.
d. Installing the Top of Stand
Once, shelf is assembled, you are ready
to assemble the top part. Please use A02
and A03 components and place the top as
shown in the model. Make sure directions
are right. Then screw to the right.
06
4
1
2
8
A02A04A02
A02A04A03
8
3
2
1
4
6
7
A02A04A13
3
4

e. installing decorative panels
Please assemble wood piece #9 as
seen in the model. Use A03
component to attach the part.
f. attaching the legs
Component A26 is the leg. Please
use A27 to attach the legs into the
body.
g. Last fix on the stand
Please take wood piece #5 and screw
it just like you see in the model.
07
9
2x
A02A04A03
A02
9
9
1
2
8
1
2
A02A04A26
A02A04A27
4
3
5
A02A04A27
5
6
7

h. installing cabinet hinges.
Please take wood parts (doors) # 13 and #14. Please place hinge (Shown as C in below hinge figure) to the
holes located on the doors, then screw it into the panel as you in figure 8-1
After that, screw the bottom part of the hinge into the TV Stand as shown in the figure 8-2
Finally, you may align the door height or width by using the screw points A and B shown in Hinge detail
figure.
c
C= Body of the hinge
Figure 8-1
Figure 8-2
Hinge Detail Figure
08
13
A=
B = to align the door
to connect the hnge to the door arrows to show the drectons for arrangement of doors.
A02
A09
A02C02
A09
A02A04 A02A04
A02C01
A02
A09
12
14
1
8

back side
I. Back Panel
Please take the back panel and with
the help of nails and hammer, please
put finalize the back panel. Put all
nails that you find in the hardware
pack
j. assembling the wall shelf.
A02A04A08
12
12 12
12
A02A02
A02A02
10
10
12
12
11
A13
9
10
09

k. please get assistance while placing the Wall Shelf on the Wall
Once you complete the assembly of wall shelf, please get assistance for placing the shelf on the
wall. Minimum 2 person would be suffice.
1
A02A16
2
A09
A02A09
A02A117
A02A25
3
10
11

final look
Enjoy your product!