Decorotika LUSI User manual

please scan the QR code
for nstallaton vdeo
LUSI
Assembly Instructıon
Tv Stand

Introduction
Valued Customer,
We design and carefully manufacture our
products for our customers, We wish that our
customers to have fun while they are doing
their new furniture
The product you just purchased was subjected
to all sorts of tests and controls before sending
out to you.
Hope you enjoy your new furniture!!!
Before starting, please check all
components and accessories
according to the provided list. If
you purchased more than one
product, to prevent confusion, be
sure that you completed the first
product, then start the next one.
Please make sure that you select
correct numbered part and use
specific connector to assemble.
We do not recommend any
modification or rotation in assembly.
Please follow the manual carefully.
Furniture parts are going through several
manufacturing procedures. During this
process, parts can have little dust or
marks. Please clean the parts with
dump cloth before assembly to get
the best result. Usual cleaning would
be suffice.
Although all products are carefully
manufactured and packed, sometimes we
experience damage during transportation. In
such cases, please check the damaged part,
note the part number written on the part and
do not hesitate to contact us
Do not use your furniture for out of
purposes. If you would like to use it
out of purpose or would like to do
some modification or rotation, please
contact us for more details.
Please do not expose your furniture
to excessive heat, cold and
humidity because product can be
affected negatively.
2
E-mal : assembly@decorotka.com
EUROPE Phone : [phone] Workng Hours: Mon- Fr (07 am - 05 pm)
You may reach us va for assembly questons. For all other assembly@decorotka.com
nqures please contact drectly wth marketplace where you placed your order.
You may also reach us va for all nqures regardng the order assembly@decorotka.com
you have placed on Please menton your order number n your e-mal.www.decorotka.us
Thanks for choosng our product.

3
or
o
Before you start
Do not install the product on rough surface.
Get required installation tools prepared
Get help from someone else!

4
10
10
1
2
2
3
4
4
4
5
6
7
8
9
20x 20x 12x
30x 4x 4x
minifix head
A02
18 mm sticker
A06
c 1
50 mm screw
A13
Ø8
A16
minifix screw
A03
5x70 mm screw
A33 D01
A09
16x
3.5x18 mm screw
A02A04A40
30x
4x 4x
C01
d1
C04
nal
rawlplug
bracelet pivot
6
6
8
9
Part1 1x
Part2 2x
Part3 1x
Part4 3x
Part5 1x
Part6 3x
Part7 1x
Part8 2x
TOTAL 18x
Components
Part9 2x
Part10 2x
Accessores
Please be aware that
C01(bracket) and
C04(pvot) parts may come
as attached together.
C01
C04

*Please notce that there s a small arrow on
A02 (mnfix head). Ths arrow should show the
drecton of upper hole.
*After attachng two peces please turn the A02
(mnfix head) clockwse drecton just a half tour
wth the help of a screwdrver.
Gettng famlar wth the man components
MINIFIX
HEAD
MINIFIX
SCREW
*Please do not overscrew the pece as t may
break f too much power s mposed. Just make
sure that t s screwed to the drecton “+”, do not
go any further.
*Minifix is the main connecon component used in
Decoroka products. Before starng, please check
the below figures.
5
*Please nsert A03 (mnfix screw) as shown below.

4
3x
3
5
4x
2
A09
A02A04C04
A02A04A03
A02A04A02
a. Installing components
Ÿ
1Ÿ
Ÿ
Please place A03 (mnfix screws) nto the part 3 holes as shown below.
Please place A02 (mnfix heads) nto the part 4 holes as shown below.
Please place C04 (pvot) nto the pre-drelled pvot holes as shown below and turn the
A09 (3x18 mm screw) clockwse drecton.
banded front sde
Note: There s edge bandng tape on
the front sde of the boards. Please make sure
that the banded edge should face forward.
b. Installing components
Ÿ
Please attach part 1 and 2 to the part 3 usng A13 (50 mm) screw as shown below.
3
1
2
A13
2
6
(50mm) screw
The screw holes are not countersunk.Push the screw (A13) through the hole untl ts head
sts flush wth the wood surface.The screw head should not protrude above the surface.

c. Installing components
ŸPlease insert the minifix heads
nto part 4 as shown below.
ŸNow attach the part 4 to part 3
as shown below.
ŸFinally screw the minifix heads
(note: turn the screwdriver to +
drecton as specified on the minifix
head)
4
4
4
3
banded front sde
Banded
front
sde
7
3

8
A02
A09
A02C01
10
10
Figure 8
d. Installing cabinet hinges.
c
C= Body of the door hinge (bracelet C01)
Hinge Detail Figure
A=
B= Align the door depth,wdth and heght.
Connects the door hnge (bracelet C01) to the pvot Arrows show the drectons for arrangement of the doors.
12
4
4
4
4
Place hnge (C01 bracelet) to the pre-drlled holes
located on the part 10 (door) as shown
n the below hnge detale figure.Then attach the doors
to the TV stand, screwng t n to the
panel as shown n the figure 8 below. Fnally you can algn/lne up
the door depth, heght or wdth by
turnng (tghtenng/loosenng) the screw (B) on pvot (C04) and
the specal screw on bracelet (C01)
as shown n the hnge detal figure.

5
5
4
4
4
6
Please do not neglect nstallng the back panel of the TV stand.
Installng the back panel wll both make your TV stand sturder
and look better.
A02A04A40
f. Attaching the back panel
Ÿ
Use all the nails given in the hardware pack for best result.
9
ŸIn this step, you need to attach top part 5
to the main body that we
assembled earlier.Follow the
below arrows and make sure screws and
holes are lne up in the specified way.
ŸAfter placng the part 5 onto the man body, turn the
minifix heads wth a screwdrver to the + direction as
specfied.
e. Installing the top of stand
Place/hold the back panel and tap as lghtly as s needed to drve
the nal nto wood, ncreasng force only when necessary wth a hammer.
Keep drvng the nal untl the head s ether flush wth or below the surface
of the wood.

10
1
A02A16
2
3
A02A33
8
9
2X
h. Assembling the wall shelf
8
9
2X
A02A04A13
7
6
6
7 7
6
6
A02A04A03
A02A04A02
g. Installing the top shelf
ŸThis top shelf is a complimentary shelf for our customer who would like to place her/hs TV a little
bit higher than usual panel.
ŸIt is a completely personal choice to place or not to place it on the TV Stand. If you have
larger TV than 55 inch, we do not recommend usng this complimentary shelf.
ŸPlease follow the diagram below to assemble the shelf.
8

Fnal look
Enjoy your Decorotika product!
[e-mail]
www.decorotika.us
www.decorotika.com
11
After finshng asembly, please cover the mnfix (A02)
and other screw heads wth 18mm stckers (A06)
that comes wth the accessory pack for a better look of your furnture.

12
[email protected] www.decorotika.us
www.decorotika.com
For any inquiries or questions,
please write, call or visit us.
We are here to help !!!
For the USA:
For the UK: support@decorotka.com