Decorotika Alice Bookcase User manual

assembly guide
Bookcase

introduction
02
Valued Customer,
We design and carefully manufacture our
products for our customers, We wish that our
customers to have fun while they are doing
their new furniture
The product you just purchased was subjected
to all sorts of tests and controls before sending
out to you.
Hope you enjoy your new furniture!!!
Before starting, please check all
components and accessories
according to the provided list. If
you purchased more than one
product, to prevent confusion, be
sure that you completed the first
product, then start the next one.
Please make sure that you select
correct numbered part and use
specific connector to assemble.
We do not recommend any
modification or rotation in assembly.
Please follow the manual carefully.
Furniture parts are going to several
manufacturing procedures. During this
process, parts can have little dust or
marks. Please clean the parts with
dump cloth before assembly to get
the best result. Usual cleaning would
be suffice.
Do not use your furniture for out of
purposes.
Please do not expose your furniture
with excessive heat, cold and
humidity because product can be
affected negatively.

or
03
o
before you start
Do not install the product on rough surfaces.
Get required installation tools prepared.
Get help from someone else!

04
Part1 1x
Part2 1x
Part3 4x
Part4 1x
Part5 1x
TOTAL 8x
components
1
2
3
3
3
3
4
5
50 MM
A13
17x
2x
Ø8
A16
19x
A10
5x70
A17
2x

1a. installing components
2
05
1
4
A13
First, you will need to start
attaching part #1 and part #4
with component A13.
Please turn component A13
wth screwdrwer.
1
3
3
3
3
A13
b. installing components
Secondly, you need to attach the
part #3s just like the same way
done in the first step. Please
make sure that side holes of part
#3s are in the same side.

06
3
4
4
5
A13
c. installing components
Please attach the part #4 and
part #5 with given component
numbered #A13.
Please be careful
with direction of the side holes of
number #3s and #4. Side holes
needs to face to the same
direction to fit the holes and
screws in the next step
1
2 3
4
3
3
3
A13
d. installing components
In this step, part #2 need to be
attached to part #3s and #4 as
shown below. Please be careful
with direction of the side holes.
All number #3s and 4s needs to
face to the same direction to fit
the holes and screws.

08
6
A17
A16
f. completing the assembly
Depending on the preference, you
may also mount the bookcase to
the wall. First, you need to take
the measurement by choosing the
right space in your room and then
drill the wall and attach as shown
below. Bookcase can also be
used as free standing.

final look
Enjoy your product!