DeDietrich DTI701 Quick start guide

DTi701
DTi704
DTi716
DTi718
Guide To Installation And Use
Induction Hob

Dear Customer,
Thank you for buying a DE DIETRICH hob.
Our research teams have designed a new generation of kitchen appliances. As a result of
our unique expertise, we have produced a range of goods whose quality, design and techni-
cal advance are unsurpassed.
You will find that the clean lines and modern look of your De Dietrich hob blends in per-
fectly with your kitchen décor. It is easy to use and performs to a high standard.
De Dietrich also makes a range of products that will enhance your kitchen such as hobs, ex-
tractor hoods, built-in dishwashers and refrigerators. There are models to complement your
new De Dietrich hob.
Of course, we make every effort to ensure that our products meet all your requirements,
and our Customer Service department is at your disposal, to answer all your questions and
to listen to all your suggestions (see back cover of manual).
De Dietrich is certain that by setting new standards of excellence by which comparisons can
be made, customers will find that De Dietrich appliances offer a better and more exciting
way of living.
DE DIETRICH.
We are constantly improving our products; for this reason we reserve the right to make all modifications to
their technical, functional or aesthetic characteristics, originating from technical developments.
WARNING
This product is not for use in the USA.
Before installing and using this appliance please read the installation guide section of this booklet
fully. This guide will help you to quickly familiarise you with all the features of the appliance.
This appliance is not intended for use by persons (including children) with reduced physical sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given su-
pervision or instruction concerning use by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance

Contents EN
1/ Description of your appliance
2/ Overview / working principle
3/ Quick start guide
4/ Product / Safety features explained
7/ Cleaning and maintaining your appliance
8/ Installation guide
11/ Help Guide

Description EN
DTi701
DTi701
Total dimensions (L x l) -
DTi701B/X: 30, 8cm x 52cm
Recess cut-out (L’ x l’)
DTi701B/X: 26, 5cm X 49cm
DTi704
DTi704
Total dimensions (L x l) (L x l) -
DTi704B/X: 65cm x 52cm
DTi704J/V: 63cm x 51cm
Recess cut-out (L’ x l’)
DTi704B/X: 56cm x 49cm
DTi704J/V: 56cm x 49cm
DTi716
DTi716
Total dimensions (L x l) (L x l) -
DTi716X: 65cm x 52cm
DTi716V: 63cm x 51cm
Recess cut-out (L’ x l’)
DTi716X: 56cm x 49cm
DTi716V: 56cm x 49cm
DTi718
DTi718
Total dimensions (L x l) (L x l)
DTi718J: 78, 3cm x 52cm
Recess cut-out (L’ x l’)
DTi718J: 75cm x 49cm
1

Working Principle EN
The induction principle
The principle of induction is based on a magnetic effect. When you place your cookware on a cooking zone
and you turn it on, the electronic circuits in your cooking hob produce “induced” currents in the bottom of
the cookware which instantly raise its temperature. This heat is then transmitted to the food.
In order for an induction hob to operate the cookware must have a ferrous base (containing Iron). A simple
rule is if a magnet sticks to the base of your pan then it should be suitable for use on induction hobs.
When you buy your cookware, make sure that one
of these logos are on the package; it assures you
that it is compatible with induction cooking.
Cookware
To verify that your cookware is suitable, place it on a heating area on power 4. - If the display remains on,
your cookware is compatible.
- If the display flashes, your cookware cannot be used with induction cooking.
You can also use a magnet to test the cookware. If a magnet “sticks” to the bottom of the cookware, it is
compatible with induction. Glass, terra cotta, aluminium without a special finish on the bottom, copper
and some non-magnetic stainless steels do not work with induction cooking.
We recommend that you select cookware with a thick, flat bottom.
A Inducon coils
B Glass insulang hob top
C Ferrous pan base
2

Quick Start Guide EN
Controls Table
A Rear Left Cooking Zone Selector
B Front Left Cooking Zone Selector
C Rear right Cooking Zone Selector
D Front Right Cooking Zone Selector
E Power “+” and “-” controls
F Power pre-set controls
G Timer “+” and “-” Controls
H MeMo control
I Lock control
Quick Start Guide
Prior to using you appliance you need to ensure the appliance has been installed in accordance with the in-
stallation instructions within this guide. Particular attention should be paid to the ventilation requirements
as this could affect the performance of the appliance as well as the long term reliability.
Operation
Care should be taken to ensure that the pan / pans being used cover a minimum of 80% of the cooking
zone.
Place the pan on the zone you wish to use and select the zone on the control panel using the selector con-
trols “A” “B” “C” or “D”.
Select either a pre-set power level “F” or use the “+” or “-” controls “E” to determine the desired power
level. If you wish to control more than one pan these should be selected in turn, noting the controls apply
the power settings to the last zone selected. This is shown by an indicator light adjacent to the zone selec-
tor controls.
You may notice a clicking noise when either using multiple zones or a single zone on low power set-
tings (below level 7). This is normal and should not be considered a fault; it is the electronics of the
appliance regulating the power delivery to the zones. You may notice a corresponding reduction of
the bubbles in the base of the pans on the hob, again this is normal.
Power sharing
The machine is manufactured with the electronics controlling the cooking zones in pairs normally
one pair for the left zones and one for the right zones (left and rear centre, and right and front cen-
tre on the DTI718). The power delivered by the independent electronics is split between these two zones.
If “boost” is selected on one zone the power is reduced on the other to ensure the maximum connected
load is not breached. This is not a fault with the appliance.
From time to time you may wish to select “Boost” on more than one zone; this can be done from selecting
one on the right of the appliance and one on the left.
Suitable cookware
If the display on the appliance flashes when set, this is an indication that either there is no pan on
the zone or, an unsuitable pan is being used. Please refer to the pan guide in the description section
of this guide for further details.
3

Protection against overflows. In case of overflow, or of a metallic object or wet
cloth placed on the control areas, the hob turns itself off, the displays light up and a
beep sounds. Clean the hob or remove the object, then begin cooking again.
“Small Items” safety. By placing a small object on the area (a ring, a fork, etc),
the hob will detect it and not deliver any power. The power display flashes.
Note: However, several small objects at the same time on a zone could be identi-
fied as cookware. In that case, power will be delivered by the hob. Do not place
any utensils (spoons, forks, covers, etc) on the cooking zone being used. They will
heat up in the same way as cookware: Risk of combustion.
Temperature limiter. Each cooking zone is equipped with a safety sensor that con-
stantly monitors the temperature of the bottom of the cookware. If you leave
empty cookware on a zone which is turned on, it will automatically limit the power
in order to prevent damage to the cookware or hob.
Automatic Pan Detection: detects when a suitable pan is placed on the cooking
zone and so eliminates the possibility of the hob being activated accidentally by a
non-suitable object.
Residual heat. After a long cooking period, the zone used can remain hot for sev-
eral minutes. An ‘’H’’ flashes during this period. Do not put your hand on the zone.
Auto-Stop system. If you forget cooking is in progress, after a predefined time,
this safety function will automatically turn off your hob (from 1 to 10 hours de-
pending on the power setting). “AS” displays and a beep sounds after about 2 min-
utes. Press on the main selector to delete this information. A beep will confirm
your setting.
Additional functions and safety Features EN
4

Control Lock: can be activated to lock the control panel during the cooking
process. This will lock the controls set on the cooking zones but will allow the stop
key to function. This is activated in / deactivated in the same way as the child lock.
Additional Functions and Safety Features EN
Electronic Power Monitor: prevents power surge and de-surge in the event of
electrical interference without loss of performance to the hob.
Clean lock
This function allows you to temporarily lock your hob while cleaning. To activate
Clean lock your cooking hob must be turned off.
- Briefly press touchpad “I”. A beep sounds and an indicator appears.
- After a predefined time, the lock will automatically disengage. A beep sounds and
the indicator goes out.
MEMO - Memorisation of a cooking
This function allows the hob to memorise and reproduce an entire cooking cycle.
NOTES -
- In order to ensure accurate reproduction of the initial cooking the same cookware
should be used.
- Each time this feature is used it erases any previous settings.
- Preheating cannot be used with the MeMo.
- If the hob is switched off, pressing the “MeMo” button will display any programmed settings
To use MeMo:
-- Select a cooking zone.
- Keep your finger on the touchpad “H”, until the indicator is illuminated,
- Adjust the power during cooking in the normal way with touch pads “E” or “F” this can be adjusted up to
five times in any cooking cycle, allowing a minimum of 10 seconds for each power level change to register
(if the number of settings exceeds 5 “NO” will be displayed on the display)
To save the setting at the end of cooking press the touchpad of the corresponding zone.
To reproduce the cooking the same zone used in the initial cooking must be selected followed by “MeMo”
(“NO” will be displayed if a different zone is selected). The programmed power levels will be displayed in
sequence followed by the start of cooking.
MeMo
Child Lock: for added peace of mind, the child lock can be manually activated to
prevent accidental start-up.
To activate the lock pres the “I” key and hold until a beep is sounded and an indica-
tor appears.
To de-activate hold the “I” key until the indicator goes out and a beep sounds.
5

Independant mer
The mer funcon can be used as an independant mer if required. Select a zone
not in use and select the Timer control “t” will flash. Using the mer keys “G” select
the me required “t” will become fixed and the countdown will begin.
Additional Functions and Safety Features EN
Adjusng the factory preset levels
With the hob turned off, press and hold the preset to be adjusted, while pressing
the preset adjust to the required power level.
Preset one can be adjusted between level 1 -5 preset two between 6-10 preset
three between 11-15
No adjustment can be made to the boost funcon.
Timer Funcons
Each zone of the appliance can be controlled by using the mer funcon to turn off
the zone aer a set period of me.
Select the zone required and adjust the power as required. press the mer controls
“G” and using the “+” or “-”keys select the cooking me required. The appliance
will now count down the me and turn off as required. when the me remaining is
less than 1 minute the display will indicate seconds remaining. at the end of the
me a beep will indicate the end of cooking.
Pre Heat /
Heat up
Pre-heat / Heat up
This Function will preheat the contents of the pan to boiling temperature before reducing
to your selected power.
To select the function turn on the required zone then press the “-“on the power selection
keys, “HU” is shown on the display, Select the power level to be maintained after the initial
heat up ( this must be level 7 or above ). During the pre-heat phase the display will alter-
nate between the selected power level and “HU”, once the preheating is complete the dis-
play will revert to the power level only. This feature can be used in conjunction with the
timer functions. For example you can set the appliance to preheat a pan of pasta to a boil
reduce the pan to a simmer then time the entire cooking phase to ensure perfect results
every time.
6

Cleaning and Maintaining your Appliance EN
Preserve your appliance
The vitroceramic glass surface is highly resistant, but not unbreakable. Here are some recommendations for
increasing its lifetime:
- Avoid banging or clattering the cookware.
- Avoid putting heating covers on the hob. A suction effect may damage the vitroceramic surface.
- Do not use cookware with bottoms that are rough or dented.
- Do not use your cooking hob as a work surface.
- Never use aluminium foil or paper or aluminium scrubber to clean it. The aluminium melts and damages
the top.
- Never use a steam cleaner to clean your hob.
- Never directly reheat a tin can. It will have a risk of exploding.
For the safety of your kitchen, do not place cleaning items or inflammable objects or cleaning products in
the kitchen furniture underneath your cooking hob.
TYPES OF STAINS/SPOTS
Light accumulation of baked-on stains/dirt.
Sugar spills, melted plastics.
Rings and hard water residue.
Shiny metal
Aesthetic faults to the hob top which does not entail a lack of function, are not covered by our guarantee.
Full terms of the guarantee are available at www.dedietrich.co.uk.
Maintaining your appliance
7

Installation Guide EN
Installation
Your appliance should be positioned so that the mains switch is
accessible. The distance between the edge of your appliance
and the side and rear walls (or partitions) must be at least four
centimetres (area A).
Your appliance can be easily integrated above a cabinet, an oven
or a build-in household appliance. Simply verify that the air in-
takes and outlets are free of obstruction, poor ventilation can af-
fect both the performance of your appliance and reduce its
lifespan.
Stick the foam gasket to the bottom of your appliance. This will
allow you to achieve an airtight seal with the worktop.
Attach the clips to the hob if supplied.
Cut-out Information.
Please ensure the correct cut out size for your appliance. Details of the cut out sizes are shown on
page 4.
L’ being the width (left to right)
l’ the depth of the cut out (front to back)
When installing above a cupboard please ensure a
gap for ventilation is provided to the rear of the
cupboard. You should also ensure that the ventila-
tion slots in the front of the appliance are not
blocked / obscured in any way.
It may be necessary to cut the work-surface or
cupboard carcass to ensure adequate air flow.
When installing your appliance above a drawer or
shallow cupboard, it may be necessary to remove
the carcass support rail from the housing in order
to ensure a 4mm air gap is maintained.
Installing above a cupboard
Installing above a drawer
8

When installing your appliance above an oven, it may
be necessary to remove the carcass support rail from
the housing in order to ensure a 4mm air gap is main-
tained. Most modern ovens including all De Dietrich
models will not require any further insulation between
the oven and hob.
It is not recommended to use the Pyro-clean function
of an oven while using the hob.
Installing above a oven
Installation Guide EN
Use of sealants
The appliance should be fixed to the work-surface using the roll of foam seal provided. Any ap-
pliance sealed to the work-surface using silicone sealant or similar may result in damage to both
the appliance and work-surface should it need to be removed. The use of sealants may result in
the appliance being unserviceable and as such may be excluded from warranty repairs.
9

Installation Guide EN
Electrical connecon
Hook-up of 220-240V ~32 amp Hook-up of 220-240V ~16 amp
•Hook-up of 2x230V 2L+2N ~ - 16A •Hook-up of 400V 2N ~ - 16A
•Hook-up of 400V 3~ - 16A
10

Help Guide EN
While switching on
During Installaon
11

Help Guide EN
While in use
12