DeDietrich G30 User manual

31
Hob operating guide
Model with 4 gas rings and
extra fast burner
Model with 2 gas rings
Model with 4 gas rings, timer
and double crown burner
Model with 2 gas rings
1 radiant ring 1 halogen ring
Model with 3 gas rings
and 1 electric ring
GB
99627412_ML_A.qxd 25/02/03 15:56 Page 31

In this Manual,
displays safety instructions
displays tips and hints
List of contents
Using your hob in complete safety 34
What your hob looks like? 35
Installing your hob in all simplicity 36
Fitting recommendations 36-38
Electrical connections 39
Gas connections 40-42
Changing the type of gas supply 43-49
Using your hob in all simplicity 50
How to use your gas burners 50
How to use the timer 51
Which pans are best adapted for use
on the gas burner? 52
How to use the radiant and halogen rings 53
Which pans work best on a radiant/halogen ring? 54
How to use the electric hotplate? 55
Which pans are best adapted for use on the electric hotplate? 55
How to look after your hob? 56
Minor troubleshooting 57
Gas-cooking guide 58
Cooking guide for radiant/halogen rings 59
Cooking guide for electrical hobs 60
32
99627412_ML_A.qxd 25/02/03 15:56 Page 32

33
Dear Customer,
Thank you for buying a DE DIETRICH hob.
Our research teams have designed a new generation of kitchen
appliances. As a result of our unique expertise, we have produced
a range of goods whose quality, design and technical advance are
unsurpassed.
You will find that the clean lines and modern look of your
DE DIETRICH hob blends in perfectly with your kitchen décor. It
is easy to use and performs to a high standard.
DE DIETRICH also makes a range of products that will enhance
your kitchen such as hobs, extractor hoods, built-in dishwashers
and refrigerators. There are models to complement your new DE
DIETRICH hob.
Of course, we make every effort to ensure that our products meet
all your requirements, and our Customer Relations department is
at your disposal, to answer all your questions and to listen to all
your suggestions (see back cover of manual).
DE DIETRICH is certain that by setting new standards of
excellence by which comparisons can be made, customers will
find that DE DIETRICH appliances offer a better and more
exciting way of living.
DE DIETRICH.
Editorial
99627412_ML_A.qxd 25/02/03 15:56 Page 33

Your hob in complete safety
34
Using your hob in complete safety
YOUR HOB IS DELIVERED PRE-SET FOR USE WITH NATURAL TOWN GAS.
We have designed your hob for
private domestic use.
With a view to the constant
improvement of our products, we
reserve the right to make any
changes in their technical, functional
or aesthetic characteristics as a result
of technical evolution.
These hobs are designed exclusively
for the cooking of drinks and
foodstuffs. These products do not
contain any asbestos-based
component parts.
You must always keep an eye on your
cooking.
Please read the instructions before
installing and using this appliance.
Should a crack appear on the
glass, disconnect your
appliance immediately and
contact your After-Sales
Service.
Never leave any CLEANING OU
INFLAMMABLE products in the cupboard
or drawer beneath your hob (aerosols
or other pressurised cans, papers,
recipe books, etc.).
Using a gas-powered hob produces
both heat and humidity in the room
where it is used. Make sure your
kitchen is well ventilated.
Disconnect your hob from both
electrical and gas supplies before
carrying out any maintenance
operations.
For safety reasons, do not forget to
close the main gas valve for built in
gas lines or the valve on the top of
your butane/propane gas cylinder.
If a knob is difficult to turn, DO NOT
FORCE IT. Call up your installer.
The EC mark of conformity can be
found on all these hobs.
99627412_ML_A.qxd 25/02/03 15:56 Page 34

35
What your hob looks like?
65 cm model with 4 gas burners
Semi-fast burner
(1.50 kW*)
Induction ring
(3.10 kW*)
Fast burner
(2.30 kW*)
Auxiliary burner
(0.85 kW*)
65 cm model with 4 gas burners
and a timer with double-crown
65 cm model with 2 gas burners
1 radiant ring + 1 halogen ring
65 cm model with 3 gas burners
+ 1 electric hotplate hob
*Power obtained using G20 natural gas.
Semi-fast burner
(1.50 kW*)
Double-crown burner
(4 kW*)
Fast burner
(2.30 kW*)
Auxiliary burner
(0.85 kW*)
Timer
Semi-fast burner
(1.50 kW*)
Halogen ring
(Ø 200 mm - 1800 W)
Extra fast burner
(3.10 kW*)
Radiant ring
(Ø 165 mm - 1200 W)
Electric hotplate hob
(Ø 145 mm - 1500 W)
Extra fast burner
(3.10 kW*)
Fast burner
(2.30 kW*)
Auxiliary burner
(0.85 kW*)
30 cm model with 2 gas burners
Semi-fast burner
(1.50 kW*)
Extra fast burner
(3.10 kW*)
99627412_ML_A.qxd 25/02/03 15:56 Page 35

This appliance should be
installed by a qualified
technician / installer.
Prior to installation, ensure that
the local distribution conditions
(nature of the gas and gas
pressure) and the adjustment
conditions of the appliance are
compatible.
The adjustment conditions are stated
on a label in the wallet and also on
the packaging.
Since this appliance is not connected
to a combustion products evacuation
device, it must be installed in
accordance with current installation
regulations and used in a well-
ventilated place. Particular attention
should be given to the relevant
requirements regarding ventilation.
Installing your hob in all simplicity
36
On this subject, combustion can take
place only if oxygen from the air is
present, so this air must be
constantly renewed and the
combustion products must be
evacuated (a minimum air input of 2
m3/hour per kw of gas energy is
required).
E.g. : 65 cm model - 4 gas burners :
Total power :
1,5 + 2,3 + 3,1 + 0,85 = 7,75 kW.
7,75 kW x 2 = 15,5 m3/h minimum
airflow.
These hobs have type X protection
(in accordance with standard EN
60.335.2.6) against overheating of
cupboards and Class 3 for installation
itself (in accordance with standard EN
30.1.1).
Fitting recommendations
30 cm 65 cm 30 cm 65 cm 30 cm 65 cm
Cut-out
Model
Width
26,5 cm 56 cm
Depth
49 cm 49 cm
Height
Depending on
cupboard
Outside
dimensions above
the work surface
31 cm 65 cm 51 cm 51,8 cm 5 cm 5 cm
Hob with double-
crown burner 6 cm
Outside
dimensions under
work surface
26 cm 55 cm 47 cm 47 cm 5,1 cm 5,1cm
99627412_ML_A.qxd 25/02/03 15:56 Page 36

Installing your hob in all simplicity
The hob must be built into the work-
top of a support cupboard. This work-
top must be at least 3 cm thick and
heat-resistant or else coated with a
heat resistant material.
A side-clearance of at least 30 cm
should be left to the right and left of
the hob. A tall cupboard or partition
too close to the hob would hinder free
movement of kitchen utensils.
If a horizontal partition is put under
the hob, it must be placed between 10
and 15 cm from the bottom of the
worktop. In any case, do not keep any
sprays or pressurized containers in the
compartment which could be just un-
der the hob.
Place the hob unit into the opening in
the worktop by carefully pulling it to-
wards you.
Put the burners, caps and pan grates
back into position.
Connect the hob power cable to your
kitchen electricity supply (See "Elec-
trical Connections" for your hob).
If you want, you can fix the hob in po-
sition on its four corners, using the
four lugs and screws provided (See
diagram).
Only use the holes provided.
Stop screwing when the lug
starts to bend.
Do not use a power screwdriver.
Fitting recommendations (cont'd)
49 cm
3 cm mini
30 cm mini 30 cm mini
56 cm
5,3 cm mini
70 cm mini
Mounting
pad.
Fixing holes
Worktop
37
99627412_ML_A.qxd 25/02/03 15:56 Page 37

Installing your hob in all simplicity
To make sure that nothing can get
between the frame and the worktop,
stick the foam seal around the out-
side of the hob.
Affix the joint provided in the folder
before installing the hob :
1- Remove the pan support grates,
the burner caps and heads after chec-
king their position.
2- Turn the hob over and place it
gently over the opening in the work-
top paying attention not to damage
the control knobs, thermocouples and
lighters.
3- Stick the foam seal delivered with
the appliance around the outside of
the hob. This seal prevents anything
getting between the glass and the
worktop.
4- Put the burners, caps and pan
grates back into position.
38
Fitting recommendations (cont'd)
Seal
99627412_ML_A.qxd 25/02/03 15:56 Page 38

39
Installing your hob in all simplicity
Hobs are delivered with a three-
conductor (2 phase + earth) H05VVF -
T105, ou H05V2V2F - T90 1mm sec-
tion cable, and must be connected to
a 230V single phase mains supply by
the intermediary of a two phase + CEI
60083 standardised earth plug, or a
single pole cut-off device with a
contact opening by at least 3mm.
Electrical connections
The protective conductor is connected to the earth connection on the hob
and therefore must also be connected to an external earth connection .
If this cable is damaged, have it replaced by your After-Sales Service as special too-
ling is required to connect it correctly.
●Mixed and all-gas hobs
Cable H05VVF - T105
or H05V2V2F - T90
Cross section of
conductors in
mm2
Fuse
230 V~- 50 Hz
All-gas and
mixed
(3+1)
1
10 A
2+ 2 radiants
1,5
16 A
CROSS SECTION OF THE CABLE TO USE
3 conductors of which 1 is to be
earthed
99627412_ML_A.qxd 25/02/03 15:56 Page 39

Installing your hob in all simplicity
If the hob is to be installed above an
oven or if other nearby heating
appliances risk heating and damaging
the gas hose then it is essential that
a rigid pipe be installed instead.
If a flexible hose is used (in the case
of butane gas) then it must not be
installed in a place where it may be in
contact with a moving part of the kit-
chen unit or a place likely to get clut-
tered.
40
Gas connections
●Preliminary remarks
;
;
@
@




;
;
Q
Q


fig.A fig.B
Reinforced, braided,
flexible gas hose with
threaded connectors
Flexible gas hose with
threaded connectors
Access to the whole length of the connection hose must be possible and the gas
hose must be replaced before its use before date (indicated on the hose).
Whatever means of connections is chosen, make sure that it is gas sound after ins-
tallation by using soapy-water.
99627412_ML_A.qxd 25/02/03 15:57 Page 40

41
Installing your hob in all simplicity
Gas connections (Cont'd)
●Possible connections
NATURAL GAS
Meter
TOWN GAS (NATURAL GAS)OR AIR-PRO-
PANE / AIR-BUTANE.
One of the 3 following connections
must be used:
-
connection with a rigid pipe (gas
standard G1/2).
The connection should be made at the end
of the elbow seal on the appliance,
or -
connection with a reinforced,
braided, flexible gas hose with
threaded connectors (fig. A on the
preceding page).
You may also use a "Gazinox" type,
stainless steel flexible tube available
from your local distributor,
or
- connection with a flexible gas
hose with threaded connectors
(fig. B on the preceding page).
These hoses must not exceed 2
metres in length and their entire
length must be accessible.
99627412_ML_A.qxd 25/02/03 15:57 Page 41

Installing your hob in all simplicity
42
Gas connections (Cont'd)
●Possible connections
BOTTLED OR TANKED GAS (BUTANE/PRO-
PANE).
For the user's safety, we advise the
connection to be made with a rigid pi-
pe if this is possible, or with a reinfor-
ced, braided, flexible gas hose (maxi-
mum length 2 metres) (fig. A).
For an existing installation, where
it is not possible to fit a reinforced,
braided, flexible gas hose, the connec-
tion can be made with a flexible gas
hose (maximum length 2 metres), wi-
th two jubilee clips: one on the
connector (fig. B), and the other on
the pressure regulator, and a gas
proof washer should be fitted between
the connector and the elbow seal on
the hob.
You will find the sealing washer and
the adaptor in the wallet delivered wi-
th the unit.
BUTANE/PROPANE
Pressure regulator compulsory
propane
butanenepropane
Temperatures above 30°C would cause overheating of the gas hose. To
avoid this, check that there are no heat-producing devices nearby.
Screw on the connector with a torque not exceeding 2.5 m/daN (m/kgF).
Gas proof
washer
(supplied)
Jubilee clip
(supplied)
Jubilee clip
(not sup-
plied)
;
;
@
@




;
;
Q
Q


fig. A fig. B
Reinforced,
braided, flexible
gas hose with
threaded
connectors
Flexible hose
connection
propane
99627412_ML_A.qxd 25/02/03 15:57 Page 42

43
Installing your hob in all simplicity
Changing the type of gas supply
●Preliminary remarks
Your hob is delivered regulated
for natural gas.
The injectors for adapting the hob for use
with butane or propane are in the wallet
containing the instructions, together with
the adaptor and the sealing washer. Please
see the corresponding paragraph on
"Gas Connections".
You can obtain an adapter sachet
from your After-sales Service.
Every time you change your gas
supply, mark the square on the label
in the wallet that corresponds to the
new type of gas (See "Gas Rating" in
this chapter).
99627412_ML_A.qxd 25/02/03 15:57 Page 43

Installing your hob in all simplicity
44
Changing the type of gas supply (cont'd)
Spanner
Spanner
Line
Line
Fig. 3
Fig. 2
Cover
Head
Dish
Grill
Glass top
Fig. 1
●Changing from natural gas to
butane/propane gas
When carrying out this operation, you
should successively:
➊ Adapt the gas connection
❷ Change the injectors
❸ Adjust the retarder on the taps
➊ ADAPT THE HOB CONNECTION to the
new gas adjustment. Refer to the pa-
ragraph “Gas connections”.
❷ CHANGE THE INJECTORS in the follo-
wing way:
• Remove the supports, and all the
burner caps and heads.
• Using the spanner supplied, uns-
crew the injectors at the bottom of ea-
ch dish and remove them (fig 1).
•
Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
➪ Screw in the injectors by hand
until they are tight.
➪ Put the spanner well onto the in-
jector.
➪ With a pencil draw a line on the
hearth plate as indicated (fig. 2).
➪ Turn the spanner clockwise un-
til the line appears on the other
side (fig. 3).Warning! Do not
go beyond this limit as you
are liable to cause damage.
99627412_ML_A.qxd 25/02/03 15:57 Page 44

45
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
●Changing from natural gas to
butane/propane gas (cont'd).
Adjustment
screw
Tap axis Fig. 4
❸ ADJUST THE RETARDER ON THE TAPS
located under the knobs. Proceed as
follows:
•
Work on one tap at a time.
•
Remove the control knobs by pul-
ling them upwards.
•
Using a small screwdriver screw
fully the brass, adjustment screw
(yellow) (Fig. 4) clockwise.
•
Check the position of the knobs be-
fore putting them back in place. Make
sure the knobs are pushed down as
far as possible.
•
Put all the burners, covers and grills
back in position.
99627412_ML_A.qxd 25/02/03 15:57 Page 45

46
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
When carrying out this operation, you
should successively:
➊ Adapt the gas connection
❷ Change the injectors
❸ Adjust the retarder on the taps
➊ ADAPT THE HOB CONNECTION to the
new gas adjustment. Refer to the pa-
ragraph “Gas connections”.
❷ CHANGE THE INJECTORS in the follo-
wing way:
•
Remove the supports, and all the
burner caps and heads.
•
Using the spanner supplied, uns-
crew the injectors at the bottom of ea-
ch dish and remove them (fig 1).
• Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
➪ Screw in the injectors by hand
until they are tight.
➪ Put the spanner well onto the in-
jector.
➪ With a pencil draw a line on the
hearth plate as indicated (fig. 2).
➪ Turn the spanner clockwise un-
til the line appears on the other
side (fig. 3).Warning! Do not
go beyond this limit as you
are liable to cause damage.
• Put all the burners, covers and grills
back in position.
●Changing from butane / propane gas
to natural gas or air-propane / air-
butane.
Spanner
Spanner
Line
Line
Fig. 3
Fig. 2
Cover
Head
Dish
Grill
Glass top
Fig. 1
99627412_ML_A.qxd 25/02/03 15:57 Page 46

47
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
●Changing from butane / propane gas
to natural gas or air-propane / air-
butane (cont'd).
Adjustment
screw
Tap axis Fig. 4
❸ ADJUST THE RETARDER ON THE TAPS
located under the knobs. Proceed as
follows:
• Work on one burner at a time.
- Light up the burner at maximum
heat.
- Remove the corresponding control
knob
- Using the small screwdriver, unscrew
the brass, adjustment screw (yellow)
turning it round twice, anti-clock-
wise (Fig. 4).
- Put the control knob back in place
and turn to minimum flame.
- Remove the knob again then turn
the adjustment screw clockwise as
low as possible without extinguishing
the flames.
- Put back the sealing ring and control
knob then turn it several times from
maximum position to minimum posi-
tion : the flame must not be extin-
guished. Otherwise, re-adjust it by
slightly screwing or unscrewing the
adjustment screw so that a stable fla-
me is obtained when the knob is tur-
ned from maximum to minimum posi-
tion.
99627412_ML_A.qxd 25/02/03 15:57 Page 47

Appliance designed for installation: Butane Propane Natural Natural Air-
FR ....................................Cat : III1C2E+3+ gas gas propane
ES - GB - PT......................Cat : II2H3+ Air-
butane
G30 G31 G20 G25 G130
Hourly input -see below: 28-30 mbar 37 mbar 20 mbar 25 mbar 8 mbar
at 15°C at 1,013 mbar
Double-crown burner
Indicator marked on injector 95 95 147 147 360
Nominal heat rating (kW) 3,60 3,60 4,00 4,00 3,60
Low heat rating (kW) 1,450 1,550 1,300
Hourly output (g/h) 262 257
Hourly output (l/h) 381 443 503
Fast burner
Indicator marked on injector 78 78 121 121 210
Nominal heat rating (kW) 2,25 2,25 2,30 2,30 2,40
Low heat rating (kW) 0,830 0,870 0,650
Hourly output (g/h) 164 161
Hourly output (l/h) 219 255 336
Extra fast burner
Indicator marked on injector 88 88 137 137 298
Nominal heat rating (kW) 3,10 3,10 3,10 3,10 3,10
Low heat rating (kW) 0,830 0,870 0,780
Hourly output (g/h) 225 221
Hourly output (l/h) 295 343 434
Semi-fast burner
Indicator marked on injector 62 62 94 94 165
Nominal heat rating (kW) 1,45 1,45 1,50 1,50 1,50
Low heat rating (kW) 0,620 0,615 0,400
Hourly output (g/h) 105 104
Hourly output (l/h) 143 166 210
Auxiliary burner
Indicator marked on injector 45 45 63 63 122
Nominal heat rating (kW) 0,750 0,750 0,850 0,850 0,850
Low heat rating (kW) 0,300 0,350 0,350
Hourly output (g/h) 55 54
Hourly output (l/h) 81 94 119
65 cm model with 4 gas burners
Total heat nominal rating (kW) 7,55 7,55 7,75 7,75 7,85
Maximum output (g/h) 549 540
(l/h) 738 858 1099
65 cm model with 4 gas rings, and double crown burner
Total heat nominal rating (kW) 8,05 8,05 8,65 8,65 8,35
Maximum output (g/h) 647 576
(l/h) 824 958 1168
30 cm model with 2 gas burners
Total heat nominal rating (kW) 4,55 4,55 4,60 4,60 4,60
Maximum output (g/h) 330 325
(l/h) 438 509 644
65 cm model with 3 gas burners + 1 electric ring
Total heat nominal rating (kW) 6,10 6,10 6,25 6,25 6,35
Maximum output (g/h) 444 436
(l/h) 595 692 889
65 cm model with 2 gas burners
+ 1 radiant ring 1200 W + 1 halogen ring 1800 W
Total heat nominal rating (kW) 4,55 4,55 4,60 4,60 4,60
Maximum output (g/h) 330 325
(l/h) 438 509 644
48
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
●Gaz rating
PT FR-GB FR-GB FR FR
FR-GB-ES ES-PT ES-PT
99627412_ML_A.qxd 25/02/03 15:57 Page 48

49
Installing your hob in all simplicity
Changing the type of gas supply (cont'd)
●Gaz rating
94 121
137 63
62 78
88 45
165 210
298 122
65 cm model with 4 gas burners 65 cm model with 4 gas rings, and double crown burner
This table shows the position of the injectors on your hob depending on the type of gas you use. The number is marked
on each injector.
Butane/Propane
gas Air- Butane/Air-
Propane
MARK ON THE INJECTORS
94 121
147 63
62 78
95 45
165 210
360 122
Butane/Propan
e gas Air- Butane/Air-
Propane
137
94
88
62
298
165
30 cm model with 2 gas burners
Butane/Propane
gas Air- Butane/Air-
Propane
94 137 62 88
65 cm model with 2 gas burners
+ 1 radiant ring 1200 W
+ 1 halogen ring 1800 W
Butane/Propa
ne gas
165 298
Air- Butane/Air-
Propane
121
137 63
78
88 45
210
298 122
65 cm model with 3 gas burners
+ 1 electric ring 1500 W
Butane/Propan
e gas Air- Butane/Air-
Propane
Natural gas
Natural gas
Natural gas
Natural gas
Natural gas
99627412_ML_A.qxd 25/02/03 15:57 Page 49

To set off the safety system, keep
the knob pressed completely
down for a few seconds after the
flame has lit up.
• Each burner is controlled by a tap
fitted with a safety device, which
cuts the gas off automatically, if ever
the flame goes out by accident (over-
flowing, drafts, etc.).
• The safety device for the burners is
in the form of a
metal rod (a thermocouple) beside to
the flame.
•
Your hob is fitted with an automatic
lighting system
integrated into the control knobs.
•
Should there be an electricity cut,
you can always light a burner using a
match and by pressing down on the
control knob at the same time.
Using your hob in all simplicity
50
• Choose the ring
you need using the
symbols at the
side of each control
knob; (E.g. back right-
hand burner).
For lighting a burner:
• Press down on the
control knob and turn
it anti-clockwise to
maximum flame
height. The lighter for
the burner will spark
as long as you keep
the control knob pres-
sed down.
• Set the flame
height as required.
The gas tap is closed
when in the “¡” posi-
tion.
How to use your gas burners?
- If ever your flame goes out, relight it as per normal procedure.
Sparker
Burner
holder
Natural gas
injector
Burner cover
Thermocouple
(Gas safety device)
Burner
head
- The flames on the burner are smaller near the grate supports to avoid any damage being
done to the enamel.
- The noise made by certain burners is related to their power and burning gas; this does not
harm the quality of cooking in any way.
99627412_ML_A.qxd 25/02/03 15:57 Page 50