DeDietrich DHD1129DG Instruction Manual

FR GUIDE D'UTILISATION
EN GUIDE TO INSTALLATION
ES MANUAL DE UTILIZACIÓN
PT GUIA DE UTILIZAÇÃO
DE BETRIEBSANLEITUNG
Hotte décorative
Decorative Hood
Campana extractora decorativa
Exaustor decorativo
Dekor-Dunstabzugshaube

40
Dear valued customer,
To discover a De Dietrich product is to experience the range of unique
emotions which only high-value items can produce.
The attraction is immediate, from the moment you set eyes on the pro-
duct. The sheer quality of the design shines through thanks to the time-
less style and outstanding finishes which make each appliance an elegant
and refined little masterpiece in its own right, each in perfect harmony with
the others.
Next, comes the irresistible urge to touch it. De Dietrich's design makes
extensive use of robust and prestigious materials. The accent is placed
firmly upon authenticity.
By combining state-of-the-art technology with top quality materials, De
Dietrich produces beautifully crafted products to help you get the most
from the culinary arts, a passion shared by all lovers of cooking and fine
food.
We hope that you enjoy using this new appliance and we would love to
receive your suggestions and to answer any questions you may have.
Please feel free to contact our customer service department via our web-
site.
To benefit from the many advantages offered by the brand, we recom-
mend that you register your product at: www.de-dietrich.com.
Thank you for choosing a De Dietrich product.
De Dietrich
You can find a full range of information about the brand at www.de-die-
trich.com
Visit the De Dietrich Gallery, 6 rue de la Pépinière (Paris eighth district)
Open from Tuesday to Saturday from 10 am to 7 pm
Customer service department: 0892 02 88 04

41
TABLE OF CONTENTS
11//NNOOTTIICCEESSTTOOTTHHEEUUSSEERR
• Safety recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
• Environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
• Description of your appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
22//IINNSSTTAALLLLIINNGGYYOOUURRAAPPPPLLIIAANNCCEE
• Using the evacuation mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
• Using the recycling mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
• Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
• Assembling the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
• Assembling the ventilation shaft
º Outdoor evacuation ............................................................................48
º Recycling ..............................................................................................49
33//UUSSIINNGGYYOOUURRAAPPPPLLIIAANNCCEE
• Description of control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
44//CCAARRIINNGGFFOORR
AANNDDCCLLEEAANNIINNGGYYOOUURRAAPPPPLLIIAANNCCEE
• Cleaning the filter cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
• Changing the carbon filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
• Cleaning the outer surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
• Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
• Maintaining your appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
55//TTRROOUUBBLLEESSHHOOOOTTIINNGG...............................................................................................
...................................................................................................56
66//AAFFTTEERR--SSAALLEESSSSEERRVVIICCEE...................................................
.........................................................................................................................................56
EN
As part of our commitment to constantly improving our products, we reserve the right to make
changes to them based on technical advances to their technical and functional features and ap-
pearance
Warning:
Before installing and using your appliance, please carefully read this Guide to
Installation and Use, which will allow you to quickly familiarise yourself with its operation.

42
1 / NOTICES TO THE USER
EN
SAFETY RECOMMENDATIONS
— This oven was designed for use by private
persons in their homes.
— This appliance is not designed to be used by
people (including children) with reduced phys-
ical, sensorial or mental capacity or people
lacking in experience or knowledge, except if
they have the benefit, through the intermedi-
ary of a person responsible for their safety, of
preliminary supervision or instruction con-
cerning the use of the appliance. It is advis-
able to supervise children to make sure that
they do not treat the appliance as a toy.
— When you receive the appliance, unpack or
have it unpacked immediately. Give it an over-
all general inspection. Make note of any con-
cerns or reservations on the delivery slip and
make sure to keep a copy of this form.
— Your appliance is intended for standard
household use. Do not use it for commercial
or industrial purposes or for any other pur-
pose than that for which it was designed.
— Do not modify or attempt to modify any of
the characteristics of this appliance. This
would be dangerous to your safety.
— Repairs must only be carried out by an
approved specialist.
— Always unplug the hood before cleaning it
or performing other maintenance acts.
— Provide adequate ventilation for the room in
the case of simultaneous use of the hood and
other appliances powered by an energy
source other than electricity. This will prevent
the hood from aspirating the combustion gas-
es.
— You should never "flambé" dishes under the
hood or operate gas rings under the hood
without placing cookware on them (the flames
sucked up into the hood can damage the
appliance).
— When frying food under the appliance, you
must carefully monitor the preparation at all
times. Oils and grease brought to very high
temperatures can catch fire.
— Respect the recommended frequency of
cleaning and filter replacements. The accumu-
lation of grease deposits may cause a fire.
— The hood should never be used over a com-
bustible fuel burning stove (wood, coal, etc.).
— Never use steam or high-pressure devices
to clean your appliance (requirement imposed
by electrical safety).
— With a view to constantly improving our
products, we reserve the right to modify their
technical, functional or aesthetic characteris-
tics, making any changes to their features
considered necessary or desirable in view of
technical progress.
— In order to easily locate the reference infor-
mation for your appliance, we recommend
that you note these data on the "After-Sales
Service Department and Customer Relation
•
Attention
Keep this user guide with your appli-
ance. If the appliance is ever sold or trans-
ferred to another person, ensure that the
new owner receives the user guide. Please
become familiar with these recommenda-
tions before installing and using your appli-
ance. They were written for your safety and
the safety of others.
Warning
In the case of a kitchen heated by a
device connected to a chimney (a stove, for
example) the "recycling" version of the
hood should be installed. Do not use the
hood without metal filters.
Suitable ventilation should be provided in
the room when the hood is used at the
same time as appliances operated by gas
or another combustible fuel.

43
Warning
Installation should only be performed by installers and qualified technicians.
Warning
Remove the protective film from the filter cartridge before use.
ENVIRONMENTAL PROTECTION
•
— This appliance's packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose.
— Your appliance also contains a great amount of recyclable material. It is marked with this label
to indicate the used appliances that should not be mixed with other waste. This way, the appli-
ance recycling organised by your manufacturer will be done under the best possible
conditions, in compliance with European Directive 2002/96/EC on Waste Electrical
and Electronic Equipment. Contact your town hall or your retailer for the used appli-
ance collection points closest to your home.
— We thank you doing your part to protect the environment.
Important
The accessible parts of this appliance may become hot if it is used with a cooking
appliance.
1 / NOTICES TO THE USER EN

44
•DESCRIPTION OF YOUR APPLIANCE
Vents
Ventilation shaft
Top surface
Control panel
A
B
C
D
1 / NOTICES TO THE USER
EN
500mm
274mm
900mm
602mm
60mm
Evac Min 650- Max 1002 Reci Min 750- Max 1102
271mm(600)
331mm(900/1000/1200)
B
C
A
D

45
2 / INSTALLING YOUR APPLIANCE EN
USING THE EVACUATION MODE
If you possess an outlet to the exterior
(fig. 1)
Your hood can be connected to this outlet
using a flue (minimum diameter 125 mm that is
enamelled, in aluminium, flexible or made of
inflammable material). If your flue is less than
125 mm in diameter, yyoouummuussttuusseetthheerreeccyy--
cclliinnggmmooddee..
•
USING THE RECYCLING MODE
If you do not possess an outlet to the exterior
(fig. 2)
All of our appliances can be used in recycling
mode.
In this case, you should add an active carbon
filter which will keep in odours.
(See Chapter 4: Changing the carbon filter.)
•
- The appliance must be unplugged during installation or when any repair or maintenance work
is being performed.
- Ensure that the network voltage corresponds to the voltage noted on the identification plate
located inside the hood.
- If the electrical installation at your residence requires any changes in order to hook up your
Appliance, call upon a professional electrician.
- If the hood is being used in evacuation mode, do not connect the appliance to a combustion
gas exhaust duct (boiler, chimney, etc.) or to a CMV (controlled mechanical ventilation) system.
- Under no circumstances should the exhaust duct empty into the attic.
- Install the hood at a safe distance of at least 70 cm from an electric, gas or combined cooking
hob.
125
150
125
150
fig. 1
fig. 2

46
2 / INSTALLING YOUR APPLIANCE
EN
Warning
This appliance is delivered with a H 05
VVF power cord that has three-0.75 mm2
conductors (neutral, phase and ground). It
must be connected to the main power supply
(which should be a 220-240 V single phase
current) via a CEI 60083 standardised socket
that should remain accessible after installa-
tion, in keeping with installation guidelines.
We cannot be held responsible for any acci-
dent resulting from an inexistent, defective
or incorrect ground lead. The fuse for your
installation must be 10 or 16A. If the power
cable is damaged, call the after-sales serv-
ice department in order to avoid danger.
Warning
If the electrical installation at your resi-
dence requires any changes in order to hook
up your appliance, call upon a professional
electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse cor-
responding to the electrical socket where
your appliance is plugged in.
•ELECTRICAL CONNECTIONS
During installation and maintenance opera-
tions, the appliance must be unplugged from
the electrical grid; fuses must be cut off or re-
moved.
Carry out the electrical connection after as-
sembly and mounting are completed.
Ensure that:
- the electrical installation has sufficient volt-
age,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.

47
ASSEMBLING THE HOOD
Warning
The hood must be installed in compli-
ance with all applicable regulations concern-
ing the ventilation of premises. In France
these regulations are described in DTU 61.1
from the CSTB. In particular, the evacuated
air should never be conveyed to a duct used
to evacuate smoke from appliances that use
gas or other combustible fuels. Unused
ducts may only be used after approval from
a competent specialist.
The minimum distance between the cooking
surface and the lowest part of the hood must
be 70 cm. If the instructions for the hob
installed under the hood specify a distance of
more than 70 cm, this requirement must be
respected.
— Draw a horizontal line 70 cm minimum from
the cooker top (A/fig. 1).
— Draw a vertical line (B/fig. 1) on the wall that
is centred over the cooker top and that ex-
tends from the horizontal line drawn in the
previous step (A) to the ceiling.
— Place the drilling template (C/fig. 1) on the
wall. In the case of a hollow wall, use suitable
wall plugs and screws.
— Drill the two holes. Insert the 2 wall plugs.
— Screw the fastening bar to the wall (C/fig. 2),
with the 2 screws (D/fig. 2)
— Hang the suction hood by its hooks (E/fig.
2).
— Adjust the height and level by moving the
clamping screws (E/fig. 2) of the supports
(the top screw for horizontal fit and the bot-
tom screw for fitting to the wall).
— Fit the anti-lifting screw (D/fig. 1)
— Remove the adhesive tape from the compo-
nent unit (F/fig. 3).
— Lift the unit around 2 cm then release it. Give
it a quarter turn then slide it and fasten it using
2 screws above the motor (fig. 3).
WWaarrnniinngg::ddoonnoottddaammaaggeetthheeccaabblleesswwhhiilleerroo--
ttaattiinnggaannddffaasstteenniinngg..
•
fig. 2
> 70 cm
=
=
C
A
B
fig. 1
90°C
2cm
1
2
3
fig. 3
D
E
F
D
C
2 / INSTALLING YOUR APPLIANCE EN

48
2 / INSTALLING YOUR APPLIANCE
EN
ASSEMBLING THE VENTILATION
SHAFT
•Outdoor evacuation
— Using the two screws (fig. 1), attach the met-
al chimney bracket against the wall, flush with
the ceiling for support.
— Mount the back-flow valve near the motor
outlet (fig. 2). This back-flow valve makes it
possible to block the entry of air from the out-
side.
— If a 125 mm flue is being installed, use the
adapter provided (fig. 3). If the diameter of
your exterior flue is less than125 mm, you
must connect your hood in recycling mode.
— Slide the end of the flue over the motor out-
let (fig. 4).
— Prepare your telescoping ventilation shaft,
taking care not to block the vents (B/fig. 4).
Fit the chimney to the hood and lift the upper
portion to adjust the height and then screw it
(G/fig.4) on the metal chimney bracket (A/fig.
4).
•
fig. 1
fig. 2 fig. 3
A
B
C
D
E
CChhiimmnneeyybbrraacckkeett
FFlluuee
AAddaapptteerr
BBaacckk--fflloowwvvaallvvee
MMoottoorroouuttlleett
F
TTeelleessccooppiinnggvveennttiillaattiioonnsshhaafftt
CChhiimmnneeyyhhoollddiinnggssccrreeww
G
Tip
For optimal use of your appliance, we
recommend that you connect the hood to a
150 mm-diameter flue (not delivered with the
appliance). Minimise the number of angles
and bends and the lengths of the flue. In the
event that the hood will be operated using
outdoor evacuation, you should ensure a
sufficient inflow of fresh air to avoid a pres-
sure deficiency in the room.
fig. 4
A
C
D
E
F
G
B

49
•Recycling
— Remove the back-flow valve (fig. 1).
— Using the two screws (fig. 2), attach the plastic
smoke deflector against the wall, flush with the
ceiling for support. Be careful to centre the
deflector in relation to the vertical line drawn on
the wall (fig. 2).
For models up to 700 mm, add the 2 struts sup-
plied in the pocket (A/fig. 2)
— Slide one end of the flue over the deflector and
the other end over the motor outlet (fig. 3).
— Prepare your ventilation shaft, taking care to
face the vents upward so that they are visible
(B/fig. 3).
— Attach the assembled chimney (C/fig. 3) to the
hood and lift the upper portion to adjust the
height, then screw it to the smoke deflector
(A/fig. 3) using the two screws (F/fig. 3).
A
B
C
D
E
SSmmookkeeddeefflleeccttoorr
TTeelleessccooppiinnggvveennttiillaattiioonnsshhaafftt
FFlluuee
MMoottoorrbbrraacckkeett
VVeennttss
fig. 1
fig. 2
CChhiimmnneeyyhhoollddiinnggssccrreeww
F
A
2 / INSTALLING YOUR APPLIANCE EN
fig. 3
A
B
D
E
F
C

50
3 / USING YOUR APPLIANCE
EN
•
DESCRIPTION OF THE CONTROLS (*Depending on model)
Note
This installation and user guide covers several models. There may be minor differences
between the details and fittings on your appliance and the description provided.
Start/stop
Speed 2
Speed 3
Boost
Delay
Light
Eolyse
Automatic mode *
AUTOMATIC MODE (depending on model)
•
This type of hood has a smart capability. Fitted with sensors, it switches on automatically when
it detects heat or steam and adjusts the suction speed accordingly. Once all smoke has been
removed, the hood switches itself off.
Selection of the hob type in automatic mode *
To select your hob type, the hood should be switched off.
Press briefly (less than 2 sec), to enter automatic mode.
Give a long press on to enter configuration mode; the button flashes.
Press to select an induction hob; flashes.
Press to select a ceramic hob; flashes.
Press to select a gas hob; flashes.
To confirm the setting, press briefly or wait 10 seconds.

51
3 / USING YOUR APPLIANCE EN
You have the option of adjusting your hood’s reaction in automatic mode.
Having confirmed the hob type and with the button flashing slowly, you can adjust the sen-
sitivity,
- press briefly for minimum sensitivity. flashes.
- press briefly for medium sensitivity. flashes.
- press briefly for maximum sensitivity. flashes.
Your configuration is automatically confirmed after 10 sec. or after a short press on .
Press briefly. ( flashes). Automatic mode is on standby).
The hood starts when it detects heat. The button lights.
The hood stops after 40 seconds or 10 minutes, depending on the amount of heat.
Switching to automatic mode
Stopping the hood in automatic mode
You are in the automatic mode and you want to stop the hood.
Press .
SWITCHING ON THE HOOD IN MANUAL MODE.
•
Pressing the button starts the hood in speed 1 (the display is illuminated).
CHANGING THE SPEED
•
Once the hood has started, you can modify the suction speed by pressing for speed 2 (
lights) or for speed 3 ( lights).
The function allows your hood to remain at maximum speed 4 for 10 minutes, before swit-
ching back to speed 2.
SWITCHING OFF THE HOOD
•
A long press on the button turns the hood off.

52
3 / USING YOUR APPLIANCE
EN
•
At the end of cooking, you can use the button to turn the hood off. This function will ensure
that suction continues for a further 10 minutes at the selected speed. flashes and the power
indicator is illuminated.
To cancel the delayed stop, press the same button and the delay function will be deactivated.
DELAYED STOP
LIGHT
•
Press the button briefly to switch the hood’s halogen light on or off.
Pressing and holding the button will change the intensity.
EOLYSE FUNCTION (depending on model)
•
A short press of the button starts the hood running silently at a reduced speed for one hour.
The button is lit and the indicator flashes.
At the end of this time, the hood stops on its own. To stop the function, press once more.
Programming the Eolyse function
A long press on the button activates programming.
The button flashes alternately with the button, indicating the start of programming.
Each short press on the button increases the eolysis time by one hour (from 1 hour to a
maximum of 9 hours) and after 9, this display goes back to 1. The hood will run silently at a
reduced speed for the selected time. The button flashes alternately with the button (the
number of successive flashes is the number of hours selected).
Programming is confirmed automatically after 25 seconds or by a short press on . (The
button flashes alternately with the button).
Programming is confirmed by pressing the button; press it a second time to cancel.

53
3 / USING YOUR APPLIANCE EN
FAN AUTO STOP
•
LIGHT AUTO STOP
•
If you forget to turn the hood off, it will turn itself off automatically after 9 hours.
If you forget to turn off the light on your hood, it will turn itself off automatically after 9 hours.
CHARCOAL FILTER SATURATED (Optional filter)
•
FILTER CARTRIDGE SATURATED
•
The button flashes (1 short flash) for 2 minutes after the hood stops to signal that the car-
tridge filters must be cleaned (see section “Cleaning the cartridge filter”).
Give a long press (more than 2 sec) on to unlock the “saturation” function.
A long press (more than 2 sec) on the and buttons allows you to select Evacuation or
Recycle mode. The and buttons are lit and the or button flashes.
A short press on selects recycle mode (the button flashes and the button is off.
A short press on selects evacuation mode (the button flashes and the button is
off.
A short press on confirms the configuration (or automatic set after 10 sec).
The hood’s default mode is evacuation.
The button flashes ( 2 short flashes) for 2 minutes after the hood stops, to signal that the
charcoal filters must be cleaned (see section “Changing the charcoal filter”).
Give a long press (more than 2 sec) on to unlock the “saturation” function.
••
EVACUATION / RECYCLE MODE

54
4 / CARING FOR AND CLEANING YOUR APPLIANCE
EN
CHANGING THE LIGHT BULB
•
MMooddeellwwiitthhhhaallooggeennbbuullbb
— Remove the lighting port (fig. 2).
— Change the G4-20W-12V halogen bulb.
— Replace the bulb by repeating these steps
in reverse order.
Model with LED bulb
— Contact after-sales service
fig. 2
CLEANING THE OUTER SURFACES
To clean the outside of your hood, use soapy water, but do not use abrasive creams or scrubbing
sponges.
•
Warning
Always unplug the hood before cleaning it or performing other maintenance acts.
Regular maintenance of your appliance is a guarantee of proper functioning, good perform-
ance and durability.
Warning
Failure to respect the guidelines for cleaning the appliance and filters may cause fires.
Please carefully adhere to the maintenance recommendations.
CLEANING THE FILTER CAR-
TRIDGES
They must be cleaned after approximately 30
hours of use or at least once a month. Rinse and
dry them thoroughly before returning
them to the hood.
•Dismantling the filter cartridge
( fig. 1)
— Replace it after approximately 120 hours of
use.
— Remove the filter cartridge by unclipping it (fig.
1).
•
CHANGING THE CARBON FILTER
(depending on model)
Replace it after approximately 120 hours of
use.
— Remove the filter cartridge by unclipping it (fig.
1).
•
fig. 1

55
Filter cartridge
MAINTAINING YOUR APPLIANCE
•
Warning
Before carrying out any work, the power supply to the hood must be turned off, either
by unplugging it or by using the circuit breaker switch.
This filter traps fatty vapours and
dust. This component plays an
important role in ensuring the
effectiveness of your hood.
In the event of tough stains, use
a non-abrasive cream, then rinse
with clean water.
Top surface and acces-
sories
NNeevveerruusseemmeettaallssccoouurriinnggppaaddss,,
aabbrraassiivveepprroodduuccttssoorreexxcceessssiivveellyy
ssttiiffffbbrruusshheess..
Activated carbon filter
(Depending on model or
optional)
To clean the body and the lighting
port, you should use only com-
mercial household cleaning prod-
ucts diluted in water and then
rinse using clean water, drying
with a soft cloth.
This filter traps odours and must
be changed at least once a year
depending on your level of use.
You should order these filters
from your dealer and note the
date the filter was changed.
Use a commercial household
cleaning product then rinse abun-
dantly and dry.
To preserve your appliance, we recommend that you use Clearit cleaning products.
Clearit offers you professional products and solutions designed for the daily care of your house-
hold appliances and kitchens.
They are on sale at your regular retailer, along with a complete line of accessories and consum-
able products.
Professional expertise serving individuals
PPRROODDUUCCTTSS//AACCCCEESSSSOORRIIEESS
MMAAIINNTTEENNAANNCCEETTOOUUSSEEWWHHAATTTTOODDOO
4 / CARING FOR AND CLEANING YOUR APPLIANCE EN

56
5 / TROUBLESHOOTING
The hood is not operating
effectively...
Ensure that:
• The selected motor speed is sufficient for the
quantity of smoke and vapours to be cleared.
• The kitchen is sufficiently ventilated to allow
for fresh air intake.
• The carbon filter is not worn (hood operating
in recycling mode).
The hood is not working...
Ensure that:
• The power is not cut off.
• A speed has been selected.
The hood stopped work-
ing
Ensure that:
• The power is not cut off.
• The single-pole cut-off device was not activat-
ed.
SSOOLLUUTTIIOONNSSSSYYMMPPTTOOMMSS
EN
Any maintenance on your equipment should
be undertaken by a qualified mechanic who is
an authorised agent for the brand appliances.
When making an appointment, state the full
reference of your equipment (model, type and
serial number). This information appears on
the manufacturer's nameplate attached to
your equipment (Fig. 1).
6 / AFTER-SALES SERVICE
EN
BRANDT APPLIANCES SAS
7 rue Henri Becquerel
92500 RUEIL MALMAISON
230V ~ 50 Hz
MADE IN FRANCE
fig. 1