Dedoes Thrift-O-Matic User manual
Dedoes U.S.
Headquarters
1060 W. West Maple Rd.
Walled Lake, MI 48390
Support & Sales
248-624-7710
www.dedoes.com 2022
Thrift-O-Matic Mix Machine
User Manual and Parts LIst
It is recommended to have each Thr
Mix Machine hard wired to its own electric
circuit within its location. Please contact your
local certielectrician for more information.
WIDTH: 176 cm / 70 in
HEIGHT: 41 cm / 17 in
DEPTH: 22 cm / 9 in
WEIGHT: 36 kg / 80 lbs
PART #: 008040
THRIFT-O-MATIC
EIGHT GALLON MIX
MACHINE
WIDTH: 177 cm / 70 in
HEIGHT: 76 cm / 30 in
DEPTH: 22 cm / 9 in
WEIGHT: 58 kg / 125 lbs
PART #: 016040
THRIFT-O-MATIC
SIXTEEN GALLON MIX
MACHINE
designed to run a
Hour continuously.
Premature wear or
damage of the
machine will occur if
the machine operates
for longer than the
suggested run time.
These motors are explosion proof, rated for Class 1, Div. 1, Group D,
coming out of the motor which must be hard wired to the power supply.
THIS MACHINE IS DESIGNED TO OPERATE A MAXIMUM OF TWO HOURS PER DAY
SAFETY PRECAUTIONS
This machine is intended for use by trained professionals in industrial work areas where public and incidental access is prohibited.
2. Gloves must be worn when handling parts because the edges may be sharp.
3. Keep hands and loose clothing away from moving parts.
4. Disconnect electrical power before performing any service on this machine.
5. Do not pick up the cans by the fork adapters.
6. Examine each can before placing them on the machine. The paddle must turn freely. Dented cans may result in premature wear, leakage, or spills.
MACHINE SET UP
surface in a convenient, well lit area. The mixing equipment is assembled with lock nuts and bolts. However, it is important that all nuts and bolts are inspected before use
as some may have become loose during transit.
ELECTRICAL INSTALLATION
Phase, 115V, 60 Hz., explosion proof, cULus (Class 1, Div. 1, Group D) motor. All motors come from the factory wired for 115V service.
IMPORTANT: CONDUIT FOR HAZARDOUS LOCATIONS MUST BE USED.
MACHINE BREAK IN
PRODUCT WARRANTY POLICY
The warranty is void:
• If not installed, assembled, or aligned properly
Thrift-O-Matic Machine
Set Up and User Guide
LUBRICATION
L
your paint manufacturer.
NOTE:
SHELF BELT ADJUSTMENT
MOTOR BELT ADJUSTMENT
NOTE:
IMPORTANT: NEW BELTS SHOULD BE CHECKED AND ADJUSTED AFTER THE FIRST DAY OF OPERATION AS NECESSARY.
SHELF BELT REPLACEMENT
1. Disconnect the electrical power to the machine.
2. Wear safety gloves. The machine edges may be sharp.
4. Remove the top shelf cover.
5. Remove the motor belt.
6. Loosen the idler assemblies.
7. Remove the old power head belt.
10. Re-install the motor belt.
11. Re-install the top shelf cover and lower the motor guard.
Thrift-O-Matic Machine
Maintenance
PN# 5129 (4L260)
Motor Belt Path
PN# 5529 (AX120)
Shelf Belt Path
Thrift-O-Matic 8 Place Machine
Parts list & Breakdown
Part No: 008040
THRIFT-O-MATIC SHELF COMPONENTS
5961-PB*
5772
P1827
5655
5770
5960M
5957
5955*
5975
F600346
5529
7035X
5308
5019PLT
5097
5941
5988M
5129
5772
P1827
5770
5960M
5770
Thrift-O-Matic 16 Place Machine
Parts list & Breakdown
Part No: 016040
5961-PB
5941
5478
5019PLT
P0541
F600348
F600346
7035X
F500349
F600344
F600345
5308
5129
5529
5097
5975
5019PLT
5478
5961-PB*
5772
P1827
5655
5770
5960M
5957
5955*
5960M
5770
5772
P1827
5770
5019PLT
THRIFT-O-MATIC SHELF COMPONENTS
Table of contents
Other Dedoes Industrial Equipment manuals
Popular Industrial Equipment manuals by other brands
steute
steute RF BF 72 SW868 Mounting and wiring instructions
Neptronic
Neptronic WP440L Series Installation instructions and user manual
CMO VALVES
CMO VALVES T-TAPPI Series Instruction and maintenance manual
MARTINS Industries
MARTINS Industries MIC-AUHD-52 manual
Benzlers
Benzlers J Series manual
Dustcontrol
Dustcontrol RAF 1600 Original instructions
