Defender GUARD IP4MCB4 User manual

QUICK START GUIDE
IP4MCB1, IP4MCB2, IP4MCB3, IP4MCB4
ATTENTION
For Returns or Support you MUST contact
DefenderCameras.com/Support

NEED HELP? PLEASE VISIT
DefenderCameras.com/Support
Open your camera & scan this QR
code for access to all Support Videos
related to your Guard Camera!

Need Help? Visit DefenderCameras.com/support
3
WHAT’S INCLUDED
Camera with pre-installed
16GB Micro SD Card
Camera Power
Extension (25 ft)
Window Warning
Sticker
Ethernet
Cable Shield
Camera Power Supply (10 ft)
Camera Mounting
Hardware
Drilling Template
Free Lifetime
Customer Support
LIFETIME
Customer Support
IMPORTANT:
The Camera Power Supply is NOT waterproof.

Need Help? Visit DefenderCameras.com/support 4
FIRST, SOME LEARNING
What You’ll Need
• High speed internet connection and wireless router
• Drill and or Phillips #2 screwdriver (Drilling template included)
• 3/32” drill bit for pilot holes
• 7/32” drill bit for wall anchors
• 7/8” long drill bit
• A compatible Android or iOS phone or tablet/iPad
• Ethernet cable (If you’d like a wired camera setup)
Microphone
Antenna
Night Vision
Sensor
Camera Lens
Indicator Light
Lower Cover
(Reset Button & SD Card)
Ethernet Cable
Connector
Power Adapter
Connector
Detachable
Mounting Base
Tip: To turn o the Indicator Light, tap (• •) on the home screen, then
select Device Details and then More to toggle the light o.
Solid: Initializing Solid: Camera is connected
Flashing: Camera not connected Flashing: Camera ready to connect
Indicator Light Meaning
Important: Guard Wi-Fi Camera will only work on 2.4 GHz frequency and
is not compatible with 5.0 GHz networks.

Need Help? Visit DefenderCameras.com/support
5
LET’S GET STARTED
1. Plug-In Your Camera
2. Download the App
Note: You can also setup a wired ethernet connection. See pg. 12
for more details.
Download the Defender Guard app and follow the steps to create an
account. An email account is required for verication.
This App is compatible with iOS 9+ and Android 4.1+
DO NOT DOWNLOAD

Need Help? Visit DefenderCameras.com/support 6
SETTING UP YOUR CAMERA
Step 1: Connect to Wi-Fi and Pair Your Camera
1. After powering on your
device, wait 60 seconds for
the LED to ash green before
pairing.
2. Tap + and Scan the QR code
with your camera and follow
the on-screen steps. Please
turn the volume UP on
your phone.
3. When prompted, enter your
Wi-Fi network password.
4. Enter a device password
to protect your camera.
Smith_2.4 GHz
Note: If your mobile device cannot
scan the QR code, tap “Add Serial
Number Manually”
Tip: If you forget your password,
press and hold the Reset button on
your camera to restore the camera to
factory settings.
IMPORTANT: You must be on a 2.4 Ghz
network for your cameras to connect.
IMPORTANT: Before pairing, ensure your phone is connected to a 2.4 Ghz wi network

Need Help? Visit DefenderCameras.com/support
7
Step 2: Position and Install Your Camera
Important: Before mounting your camera,
use the app to test your Wi-Fi strength and
video feed. Plug the camera in the area you’ll
be monitoring and view your footage to
ensure you have a clear and uninterrupted
view. To check your network signal strength,
navigate to the Home Screen, select Me >
Tool > Wi-Fi Detection Tool
Note: Cement walls, exterior nishes, and
thick insulation can signicantly aect Wi-Fi
strength. Detection takes about 60 seconds.
2.5 m
(8 ft)
Install your camera in a preferred place, at
a height where you can clearly see faces.
Make sure there is a nearby power outlet.
Position the camera using the adjustable joints
to ensure the best possible camera angle.
Tip: Your Guard Camera comes with a 25 ft. extension
cable, giving you 35 ft. to mount your camera from the
power outlet.

Need Help? Visit DefenderCameras.com/support 8
USING THE APP
Get To Know Your Home Screen
MeNoticationsHome
Add a Camera
Camera Name
Live View
Home Screen
Device Settings
Local Storage
Status
Account Settings
Notication
Settings
Notications Menu

Need Help? Visit DefenderCameras.com/support
9
See It All With Live View
Device Settings
Share Device
Live Stream
Live Stream
Tool Bar
Save a snapshot to
your phone/tablet
(View or Share via
Me > Local Files)
View Recorded
Footage
Pause Live
Stream
Toggle between
Single or Multi-
Camera views
Turn On/O
Sound
Live Stream
Picture Quality
Image
Orientation
Record a video to
your phone/tablet
(View or Share via
Me > Local Files)

Need Help? Visit DefenderCameras.com/support 10
Setting Up Motion Detection
To access Detection Settings, navigate to the home screen, tap (• •),
select Device Details and Detection.
You can turn Motion Detection on or o.
Select Detection Region Setting to set
Activity Regions, reducing motionnotica-
tions from high movement areas, such as
the road or a tree.
Select Detection Sensitivity to set your
motion sensitivity level. 1 is a low sensitivity
level, with 5 being the highest.
Tip: We recommend starting with level 2, as level
5 will result in signicant alerts. Adjust as needed.
Tap (or drag) the grid to set your motion
detection area. Regions highlighted in
orange will detect motion. No alarm will
be triggered when motion is detected in
the non-motion detection areas.

Need Help? Visit DefenderCameras.com/support
11
Setting Up Continuous Recording
To access Continuous Recording settings, from the home screen, tap (• •),
select Device Details > Local Storage Rule > General Record Storage
Camera video will be continuously
stored after enabled.
Note: Once your SD card is full, older
footage will be overwritten.
To set a schedule or record continuously,
select Recording Schedule.
Tap the Gear icon or any day of the
week to add recording periods.

Need Help? Visit DefenderCameras.com/support 12
These steps should be followed when your Wi-Fi network is not stable
enough for a Wi-Fi connection or you intend to use this camera via a
wired connection.
Connect an ethernet cable (not included) from your router directly to
your camera. The ethernet cable should always be connected from this
step onwards.
Once connected with ethernet, wait for the indicating light to be solid
green (means the camera is connected with internet)
Start adding the camera via the Guard App, it should automatically add
and ask for a password to protect the camera just like the Wi-Fi option.
OPTIONAL WIRED SETUP

PROTECT
Covered for the
unexpected
SUPPORT
Receive videos, tips &
updates for your product
VALUE
Exclusive access to
special oers
ACTIVATE YOUR
WARRANTY
Open your camera & scan this
QR code, or visit:
DefenderCameras.com/Warranty

Need Help? Visit DefenderCameras.com/support
14
FREQUENTLY ASKED QUESTIONS
Is the Guard Camera Cordless?
Guard is a wireless device, transmitting your footage without the use
of video cables. It is not cordless. Guard must be plugged into a power
source at all times, never risking a dead battery.
How Many Guard Cameras Can You Connect to One App?
You can pair up to 6 Guard cameras to the app and view up to 4 cameras
in quad screen, at one time.
How Long is the Defender Guard Power Cord?
Included with your purchase is a 10ft. power supply and 25ft. extension
cord. Additional extension cables are available if needed.
What are the Network Requirements to Use the Guard?
A 2.4 GHz Wi-Fi network connection is required. 5.0 GHz is not supported.
For further assistance on connecting cameras, please contact Defender
Support. (DefenderCameras.com/Support)
Can I View my Live or Recorded Footage from a Web Browser?
We do not oer web viewing. Footage can be viewed from the free
Defender Guard app or from the SD card with a compatible device.

Need Help? Visit DefenderCameras.com/support 15
SHARE YOUR MOMENTS WITH US!
[email protected]
#DefenderMoments
/defenderusa @DefenderCameras

DefenderCameras.com
DEFENDER®does not endorse any DEFENDER® products for illegal activities.
DEFENDER®is not responsible or liable in any way for any damage, vandalism,
theft or any other action that may occur while a DEFENDER®product is in use
by the purchaser. We reserve the right to change models, conguration, or
specications without notice or liability. Product may not be exactly as shown.
©2022 DEFENDER®. All rights reserved. DEFENDER®, the DEFENDER®logo and
other DEFENDER® marks may be registered. All other Trademarks are the
property of their respective owners.
REV1304062022