Definitive Technology SuperTower BP-8080ST User manual

Definitive·· TetHnology'···
BIP LAR PERT WER OWNER'S MANUAL
BP-8000 SuperTower® Series:
BP-8080ST, BP-8060ST, BP-8040ST, BP-8020ST
DePnitive Technolngj®
The Leader in High-Performance Loudspeakers®
Thank you for choosing the Definitive Technology Bipolar 5uperTower Loudspeaker
System. The Bipolar
5T is aunique speaker which features Forward-Focused Bipolar
array technology
and abuilt-in powered subwoofer. This extraordinary speaker is truly
state-of-the-art in music
and home theater loudspeaker technology and performance.
You have chosen wisely.
Our engineers have spent
many years in developing this product. In order to ensure
that you experience the finest performance possible, we encourage you to take a
moment to fully read this owner's manual and familiarize yourself with the proper
installation
and set-up procedures for your Bipolar ST speakers.
www.DefinitiveTech.com
Definitive·· TetHnology'···
BIP LAR PERT WER OWNER'S MANUAL
BP-8000 SuperTower® Series:
BP-8080ST, BP-8060ST, BP-8040ST, BP-8020ST
DePnitive Technolngj®
The Leader in High-Performance Loudspeakers®
Thank you for choosing the Definitive Technology Bipolar 5uperTower Loudspeaker
System. The Bipolar
5T is aunique speaker which features Forward-Focused Bipolar
array technology
and abuilt-in powered subwoofer. This extraordinary speaker is truly
state-of-the-art in music
and home theater loudspeaker technology and performance.
You have chosen wisely.
Our engineers have spent
many years in developing this product. In order to ensure
that you experience the finest performance possible, we encourage you to take a
moment to fully read this owner's manual and familiarize yourself with the proper
installation
and set-up procedures for your Bipolar ST speakers.
www.DefinitiveTech.com

.~ ,;., iJj ;;,,;
llP', ,
Unpacking Your BP-8000 Super Tower
I~
Positioning_the Speakers in Yo~~ Room __ ._.~~._~
Your new Bipolar speakers are very flexible in terms of positioning and placement.
To optimize their performance, please follow these simple guidelines. Although the
follOWing recommendations will usually yield the best results, all rooms and listen-
ing sets-ups are different,
r-------r------~--_,_--_,
>4" t
so do not be afraid to
~::e~;~:::n~~e t6t Q9 ·~~~·~tj~7
Whatever sounds best to (30 em) .... (30 em)
you is correct. ..~ C ......
'. ..
CAUTION: Important Safety Instructions
WARNING: DO NOT OPERATE SPEAKER WITHOUT
STABILIZER FEET INSTALLED
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred
in handling after it left our plant and should be
reported to your Definitive dealer or
the delivery company that delivered your
loudspeaker. Please unpack your system carefully. Save all cartons
and packing
materials in case you
move or need to ship your system. Record the serial number
found on the back of the Bipolar 8oo0ST speaker.
Accessories included in your Bipolar ST box:
1. Stabilizer Feet: Qty (4) BP-8080ST, BP-8060ST, and BP-8040ST; Qty (2) BP-8020ST
2. Philips Head Screws: Qty (8) BP-8080ST, BP-8060ST, and BP-8040ST;
Qty (4) BP-8020ST
3. Carpet Spikes: Qty (4) all models
4. Hard Floor Glides: Qty (4) all models
Accessory Installation
"Definitive Technology is
not responsible for damage
to floors caused by misuse
of the provided accessories. iI
Dgm<1 r# ~~I .
I" J! I, i L_ .IraN/au F~t "''' 5,_,
rr - Optional Carpet Spikes
Power Supply
1. The fuse and power disconnect device are located on the back of the speaker.
2. The disconnect device is the power cord, detachable at either the speaker
or
the wall.
Figure 2
Positioning Bipolar
ST as Left/Right
Main Speakers
Set up the speakers and
listening position in an
equilateral triangle as
illustrated. You will also
get good results
if the
listeners are abit farther away. For example, if line A and Care each 10' long then
line Bwould be between 7' and 8' long.
CAUTION! To reduce the risk of electric shock and fire, do not remove the
cover or back plate of this device. There are no user serviceable parts inside.
Please refer all servicing to licensed service technicians. Avis: Risque de choc
electricque, ne pas ouvrir.
CAUTION! The international symbol of alightning bolt inside atriangle is
intended to alert the user to uninsulated "dangerous voltage" within the
device's enclosure. The international symbol of an exclamation point inside
a triangle is intended to alert the user to the presence of important operat-
ing, maintenance and servicing information in the manual accompanying
the
device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide
slot, fully insert. Attention: Pour eviter les choes electriques, introduire la
lame la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equip-
ment to rain or moisture.
1. Read Instructions-All safety and operating instructions should be read
before operating the device.
2. Retain Instructions-The safety and operating instructions should be
retained for future reference.
3. Heed Warnings-All warnings on the device and in the operating
instructions
should be adhered to.
4. Follow Instructions-All operating and safety instructions should be
followed.
S. Water &Moisture-The device should never be used in, on or near
water for risk of fatal shock.
6. Carts &Stands-The device should only be used on carts or stands rec-
ommended by the manufacturer.
7. Wall & Ceiling Mounting-The device should be mounted on a wall or
ceiling only as recommended by the manufacturer.
8. Ventilation-The device should always be located in such a way that it
maintains proper ventilation.
It should never be placed in abuilt-in installation or anywhere that
may impede the flow of air through its heat sink.
9. Heat-Never locate the device near heat sources such as radiators, floor
registers, stoves or other heat-generating devices.
10. Power Supply-The device should only be connected to a power supply
of the type described in the operating instructions or as marked on the
device.
11. Power Cord Protection-Power cables should be routed so they are not
likely to be stepped on or crushed by items placed on them or against
them. Special attention should be paid to areas where the plug enters a
socket or fused strip and where the cord exits the device.
12. Cleaning-The device should be cleaned in accordance with manufac-
turer's instructions.
13. Periods Of Non-Use-The device should be unplugged when not being
used for extended periods.
14. Dangerous Entry-Care should be taken that no foreign objects or
liquids fall or are spilled inside the device.
15. Damage Requiring Service-The device should be serviced by licensed
technicians when:
• The plug or power supply cord has been damaged.
• Objects have fallen on or liquid has spilled inside the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a
marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
16. Service-The device shoula always be serviced by licensed technicians.
Only replacement parts specified by the manufacturer should be used.
The use of unauthorized substitutions may result in fire, shock, or other
hazards.
Safety Precautions
.~ ,;., iJj ;;,,;
llP', ,
Unpacking Your BP-8000 Super Tower
I~
Positioning_the Speakers in Yo~~ Room __ ._.~~._~
Your new Bipolar speakers are very flexible in terms of positioning and placement.
To optimize their performance, please follow these simple guidelines. Although the
follOWing recommendations will usually yield the best results, all rooms and listen-
ing sets-ups are different,
r-------r------~--_,_--_,
>4" t
so do not be afraid to
~::e~;~:::n~~e t6t Q9 ·~~~·~tj~7
Whatever sounds best to (30 em) .... (30 em)
you is correct. ..~ C ......
'. ..
CAUTION: Important Safety Instructions
WARNING: DO NOT OPERATE SPEAKER WITHOUT
STABILIZER FEET INSTALLED
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred
in handling after it left our plant and should be
reported to your Definitive dealer or
the delivery company that delivered your
loudspeaker. Please unpack your system carefully. Save all cartons
and packing
materials in case you
move or need to ship your system. Record the serial number
found on the back of the Bipolar 8oo0ST speaker.
Accessories included in your Bipolar ST box:
1. Stabilizer Feet: Qty (4) BP-8080ST, BP-8060ST, and BP-8040ST; Qty (2) BP-8020ST
2. Philips Head Screws: Qty (8) BP-8080ST, BP-8060ST, and BP-8040ST;
Qty (4) BP-8020ST
3. Carpet Spikes: Qty (4) all models
4. Hard Floor Glides: Qty (4) all models
Accessory Installation
"Definitive Technology is
not responsible for damage
to floors caused by misuse
of the provided accessories. iI
Dgm<1 r# ~~I .
I" J! I, i L_ .IraN/au F~t "''' 5,_,
rr - Optional Carpet Spikes
Power Supply
1. The fuse and power disconnect device are located on the back of the speaker.
2. The disconnect device is the power cord, detachable at either the speaker
or
the wall.
Figure 2
Positioning Bipolar
ST as Left/Right
Main Speakers
Set up the speakers and
listening position in an
equilateral triangle as
illustrated. You will also
get good results
if the
listeners are abit farther away. For example, if line A and Care each 10' long then
line Bwould be between 7' and 8' long.
CAUTION! To reduce the risk of electric shock and fire, do not remove the
cover or back plate of this device. There are no user serviceable parts inside.
Please refer all servicing to licensed service technicians. Avis: Risque de choc
electricque, ne pas ouvrir.
CAUTION! The international symbol of alightning bolt inside atriangle is
intended to alert the user to uninsulated "dangerous voltage" within the
device's enclosure. The international symbol of an exclamation point inside
a triangle is intended to alert the user to the presence of important operat-
ing, maintenance and servicing information in the manual accompanying
the
device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide
slot, fully insert. Attention: Pour eviter les choes electriques, introduire la
lame la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equip-
ment to rain or moisture.
1. Read Instructions-All safety and operating instructions should be read
before operating the device.
2. Retain Instructions-The safety and operating instructions should be
retained for future reference.
3. Heed Warnings-All warnings on the device and in the operating
instructions
should be adhered to.
4. Follow Instructions-All operating and safety instructions should be
followed.
S. Water &Moisture-The device should never be used in, on or near
water for risk of fatal shock.
6. Carts &Stands-The device should only be used on carts or stands rec-
ommended by the manufacturer.
7. Wall & Ceiling Mounting-The device should be mounted on a wall or
ceiling only as recommended by the manufacturer.
8. Ventilation-The device should always be located in such a way that it
maintains proper ventilation.
It should never be placed in abuilt-in installation or anywhere that
may impede the flow of air through its heat sink.
9. Heat-Never locate the device near heat sources such as radiators, floor
registers, stoves or other heat-generating devices.
10. Power Supply-The device should only be connected to a power supply
of the type described in the operating instructions or as marked on the
device.
11. Power Cord Protection-Power cables should be routed so they are not
likely to be stepped on or crushed by items placed on them or against
them. Special attention should be paid to areas where the plug enters a
socket or fused strip and where the cord exits the device.
12. Cleaning-The device should be cleaned in accordance with manufac-
turer's instructions.
13. Periods Of Non-Use-The device should be unplugged when not being
used for extended periods.
14. Dangerous Entry-Care should be taken that no foreign objects or
liquids fall or are spilled inside the device.
15. Damage Requiring Service-The device should be serviced by licensed
technicians when:
• The plug or power supply cord has been damaged.
• Objects have fallen on or liquid has spilled inside the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a
marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
16. Service-The device shoula always be serviced by licensed technicians.
Only replacement parts specified by the manufacturer should be used.
The use of unauthorized substitutions may result in fire, shock, or other
hazards.
Safety Precautions

Connecting Your Loudspeakers
Identify markings on wire and assign +1-.
•
•
•
Max
•
•
•
•
•
•
•••
Min
Your Bipolar STs have bass level controls which allow you to adjust the output
level of the powered subwoofers to match your room and personal listening
preferences. Please
note that there are no controls to
vary the crossover points or phase. The crossover
points
and phase have been factory-calibrated to
provide perfect blending. We suggest beginning with
the level control set at approximately 12 o'clock.
Each speaker's bass controls
can also be set differently
in order to allow you to compensate for asymmetrical
positioning
of the speakers in your room (Le., when
one is closer to aside wall or comer, etc.).
Setting Your Speakers' Low-Frequency Level Control
to an hour for the amplifier to tum off. Due to stray radio signals (RF) in your
area,
the LEDs may not tum off. Do not be concerned, the amplifiers draw little
power
when they are idle.
Receiver/Amplifier
I nl
.-
':t
!
I
~T
Figure 3 - Wiring and Polarity
Strip 1/4" (6mm) wire.
Powering the Active Subwoofer
Your Bipolar STs contain abuilt-in subwoofer amplifier that must be plugged into
an electrical socket. When powering up from being unplugged, the LED on the
amplifier panel will flash for 30 seconds while the firmware is loading. The
Bipolar ST has aspecial circuit which automatically turns on when asignal is fed
to the loudspeaker. The LED on the back panel will light up when asignal is
sensed and the amplifier turns on. After the cessation of asignal, it may take up
•
Complete Home Theater System
We strongly suggest that you use matching Definitive center channel and
rear/surround speakers to complete your Definitive home theater system. Please
note that you can use Definitive Bipolar SuperTowers as rear or side surround
speakers
with excellent results for both music and movies.
Troubleshooting
If you experience any difficulties with your Bipolar ST loudspeakers, try the
suggestions below. If you still have problems, contact your Definitive Technology
Authorized Dealer for assistance.
1. Audible distortion when the speakers are playing at loud levels is caused
by turning up your receiver or amplifier louder than the receiver or the
speakers are capable of playing. Most receivers and amplifiers put out their
full-rated power well before
the volume control is turned all the way up, so
the position of the volume control is a poor indicator of its power limit. If
your speakers distort when you play them loud, turn the volume down!
2. If you experience a lack of bass, it is likely that one speaker is out of phase
(polarity)
with the other and needs to be rewired with closer attention to
connecting positive to positive and negative to negative on both channels.
Most speaker wire has
some indicator (such as color-coding, ribbing or
writing) on one of the two conductors to help you maintain consistency.
It
is essential to connect both speakers to the amplifier in the same way
(in phase).
3. Make sure all your system interconnects
and power cords are solidly in place.
4. Should you hear hum or noise coming from your speakers, try plUgging
the speakers' power cords into adifferent AC circuit than your amplifier.
5.
The system has sophisticated internal protection circuitry. If for some
reason
the protection circuitry trips, turn off your system and wait five
minutes before trying the system again. If the speakers' built-in amplifier
should over-heat,
the system will tum off until the amplifier cools down
and resets.
6. Check
to be sure that your power cord has not been damaged.
7. Check that no foreign objects or liquid has entered the speaker cabinet.
8.
If you cannot get the subwoofer driver to turn on or if no sound comes out
and you are sure the system is set up properly, please bring the loudspeaker
to your Definitive Technology Authorized Dealer for assistance; call first.
SubwooleQ)
Connection Option 1
level
@
-~\tD
I-
Receiver/Amplifier
~
8
@lFE
lfIe""er ou1pu'
+
Speaker Setup
._-EJ-
~ Sub
arge 110
Receiver/Ampt,fier
C ct' 0r2
Large 'feS
onne Ion pion
Subwoofer (!)
Subwo.l" (!)
v
LFE lFE_
level
level .......
I---
ft-@ ••••••••• ........ _....
fo~+
- .. _~-
r-
-~-
...... "Y. Conn"'" 'ovailable h.m dealer
""'lfE
speakeraulput
•........
•••••••••••••• €) +Go· ........
----€)-
Speaker Setup
Rigid W;
speaker Sub
1. Unscrew binding post and insert wire. Ensure that the speaker is always con-
2. Tighten until wire is secure. nected to the receiver or amplifier + to +
and-to-.
Wiring Options: High Level, High Level and LFE wi "Y" Connector
VERY IMPORTANT:
Do not use your receiver~ auto set-up functions as they are
often ineffective in setting up and adjusting speakers with built-
in powered subwoofersl
Use the manual speaker setup func-
tions
in your receiver to set speaker
configuration, speaker distance
and
channel balance. Consult your
receiver's or processor's manual to
learn how to access and use the set
up menus. Use the settings called for
in Figure 4,
Figure4
Connecting Your Loudspeakers
Identify markings on wire and assign +1-.
•
•
•
Max
•
•
•
•
•
•
•••
Min
Your Bipolar STs have bass level controls which allow you to adjust the output
level of the powered subwoofers to match your room and personal listening
preferences. Please
note that there are no controls to
vary the crossover points or phase. The crossover
points
and phase have been factory-calibrated to
provide perfect blending. We suggest beginning with
the level control set at approximately 12 o'clock.
Each speaker's bass controls
can also be set differently
in order to allow you to compensate for asymmetrical
positioning
of the speakers in your room (Le., when
one is closer to aside wall or comer, etc.).
Setting Your Speakers' Low-Frequency Level Control
to an hour for the amplifier to tum off. Due to stray radio signals (RF) in your
area,
the LEDs may not tum off. Do not be concerned, the amplifiers draw little
power
when they are idle.
Receiver/Amplifier
I nl
.-
':t
!
I
~T
Figure 3 - Wiring and Polarity
Strip 1/4" (6mm) wire.
Powering the Active Subwoofer
Your Bipolar STs contain abuilt-in subwoofer amplifier that must be plugged into
an electrical socket. When powering up from being unplugged, the LED on the
amplifier panel will flash for 30 seconds while the firmware is loading. The
Bipolar ST has aspecial circuit which automatically turns on when asignal is fed
to the loudspeaker. The LED on the back panel will light up when asignal is
sensed and the amplifier turns on. After the cessation of asignal, it may take up
•
Complete Home Theater System
We strongly suggest that you use matching Definitive center channel and
rear/surround speakers to complete your Definitive home theater system. Please
note that you can use Definitive Bipolar SuperTowers as rear or side surround
speakers
with excellent results for both music and movies.
Troubleshooting
If you experience any difficulties with your Bipolar ST loudspeakers, try the
suggestions below. If you still have problems, contact your Definitive Technology
Authorized Dealer for assistance.
1. Audible distortion when the speakers are playing at loud levels is caused
by turning up your receiver or amplifier louder than the receiver or the
speakers are capable of playing. Most receivers and amplifiers put out their
full-rated power well before
the volume control is turned all the way up, so
the position of the volume control is a poor indicator of its power limit. If
your speakers distort when you play them loud, turn the volume down!
2. If you experience a lack of bass, it is likely that one speaker is out of phase
(polarity)
with the other and needs to be rewired with closer attention to
connecting positive to positive and negative to negative on both channels.
Most speaker wire has
some indicator (such as color-coding, ribbing or
writing) on one of the two conductors to help you maintain consistency.
It
is essential to connect both speakers to the amplifier in the same way
(in phase).
3. Make sure all your system interconnects
and power cords are solidly in place.
4. Should you hear hum or noise coming from your speakers, try plUgging
the speakers' power cords into adifferent AC circuit than your amplifier.
5.
The system has sophisticated internal protection circuitry. If for some
reason
the protection circuitry trips, turn off your system and wait five
minutes before trying the system again. If the speakers' built-in amplifier
should over-heat,
the system will tum off until the amplifier cools down
and resets.
6. Check
to be sure that your power cord has not been damaged.
7. Check that no foreign objects or liquid has entered the speaker cabinet.
8.
If you cannot get the subwoofer driver to turn on or if no sound comes out
and you are sure the system is set up properly, please bring the loudspeaker
to your Definitive Technology Authorized Dealer for assistance; call first.
SubwooleQ)
Connection Option 1
level
@
-~\tD
I-
Receiver/Amplifier
~
8
@lFE
lfIe""er ou1pu'
+
Speaker Setup
._-EJ-
~ Sub
arge 110
Receiver/Ampt,fier
C ct' 0r2
Large 'feS
onne Ion pion
Subwoofer (!)
Subwo.l" (!)
v
LFE lFE_
level
level .......
I---
ft-@ ••••••••• ........ _....
fo~+
- .. _~-
r-
-~-
...... "Y. Conn"'" 'ovailable h.m dealer
""'lfE
speakeraulput
•........
•••••••••••••• €) +Go· ........
----€)-
Speaker Setup
Rigid W;
speaker Sub
1. Unscrew binding post and insert wire. Ensure that the speaker is always con-
2. Tighten until wire is secure. nected to the receiver or amplifier + to +
and-to-.
Wiring Options: High Level, High Level and LFE wi "Y" Connector
VERY IMPORTANT:
Do not use your receiver~ auto set-up functions as they are
often ineffective in setting up and adjusting speakers with built-
in powered subwoofersl
Use the manual speaker setup func-
tions
in your receiver to set speaker
configuration, speaker distance
and
channel balance. Consult your
receiver's or processor's manual to
learn how to access and use the set
up menus. Use the settings called for
in Figure 4,
Figure4

Bp·8080ST Bp·8060ST Bp·8040ST Bp·8020ST
18Hz -30kHz 20Hz -30kHz 25Hz -30kHz 30Hz -30kHz
92dB 92dB 92dB 92dB
Nominal 8
Ohms Nominal 8 Ohms Nominal 8 Ohms Nominal 8 Ohms
20-400w 20-300w 20-300w 20-250w
400w 300w 300w 250w
lifier Power
400w 300w 300w
150w
1 1 1
12" 10" (25.4
eml
8" (20.32
eml
8" (20.32
eml
2 2 Vented
10" 25.4 eml 8" 20.32 eml
3 3 3
4.5" (11.43
eml 3.5" (8.9 eml 3.5" (8.9 eml
2 2 1
1" (2.54
eml 1" (2.54 eml 1" (2.54 eml
Technical Assistance
Service
It is our pleasure to offer assistance if you have any questions regarding your
Bipolar
STs or their set-up. Please contact your nearest Definitive Technology
dealer or call us directly
at [phone] (US &Canada), 01 [phone]
(all other countries) or e-mail [email protected]. Technical support is
offered in English_only. _
Definitive Technology Offices
11433 Cronridge Drive, Owings Mills, Maryland 21117
Phone: [phone]
(US &Canada), 01 [phone] (all other countries)
Service
and warranty work on your Definitive loudspeakers will normally be
performed
by your local Definitive Technology dealer. If, however, you wish to
return the speaker to us, please contact us first, describing the problem and
requesting authorization as well as the location of the nearest factory service
center.
Please note that the address given in this booklet is the address
of our offices only. Under no circumstances should loudspeakers be
shipped to our offices or returned without contacting us first and
obtaining return authorization.
,----------------------------------------------------------_ .. _---,
All tights reserved. I
------.J
:"Dejjnitive Technohgy®
The Leader in High· Performance Loudspeakers
8
CE
This product complies with the essential requirements
of the EMC directive 89/336/EEC.
Some states do not allow the exclusion or limitation of consequential or incidental damages, or implied warranties,
so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR PRODUCT.
DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT
ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH YOUR PRODUCT OR THIS WAR-
RANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS, IMPLIED,WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW ALL IMPLIED WAR-
RANTIES ON PRODUCT ARE LIMITED TO THE DURATION OF THIS EXPRESSED WARRANTY. DEFINI-
TIVE HAS NO LIABILITY FOR ACTS OF nnRD PARTIES. DEFINITIVE'S LIABILITY, WHETHER BASED
ON CONTRACT, TORT, STRICT LIABILITY, OR ANY OTHER THEORY, SHALL NOT EXCEED THE PUR-
CHASE PRICE OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO CIRCUM-
STANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. THE CONSUMER AGREES AND CONSENTS
THAT ALL DISPUTES BETWEEN THE CONSUMER AND DEFINITIVE SHALL BE RESOLVED IN
ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA DEFINITIVE
RESERVES THE RIGHT TO MODIFY nns WARRANTY STATEMENT AT ANY TIME.
©2009 DEI Sales Co.
..
For more information an Definitive Technology Loudspeakers and accessories, ~"
visit www.definitivetech.com. or email [email protected]. ~' _
Definitive Technology, Owings Mills, Maryland, USA. 800-228-7148 >-
THE WARRANTY IS AUTOMATICALLY VOID IF:
I) The product has been dall/oged, altered in any way. mishandled during tTrll/spartation. or tampered with.
2) The product is damaged due to accident,fire,j/ood, unreasonable use. misuse. abuse. customer
applied cleaners,Jailure to observe malluJacturers wornings, neglect or related events.
3) Repair or modificatioll oj the Producf has not been mode or authorized by Defillitive Technology
4) The product has beell improperly illStalled or used.
Product must be returned (insured and prepaid), together with the original dated proof of purchase to the Authorized
Limited Warranty: 5-Years for Drivers and Cabinets, 3-Years for Electronic Components
DEI Sales Co., dba Definitive Technology (herein "Definitive") warrants to the original retail purchaser only that Dealer from whom the Product was purchased, or to the nearest Definitive factory
this Defmitive loudspeaker product (the "Product") will be free from defects in material and workmanship for a peri- service center. Product must be shipped in the original shipping container or its equivalent Definitive is not respon-
od of five (5) years cover.ing the drivers and cabinets, and three (3) years for the electronic components from the date sible or liable for loss or damage to Product in transit
of
the original purchase from a Definitive Authorized Dealer. If the Product is defective in material or workmanship,
Definitive or its Authorized Dealer will, at its option, repair or replace the warranted product at no additional cbarge,
except as set forth below. All replaced parts and Product( s) become the property of Defmitive. Product that is
repaired or replaced under this warranty will be returned to you, within a reasonable time, freight collect. This war-
ranty is non-transferrable and is automatically void if the original purchaser sells or otherwise transfers the Product
to any other party.
This Warronty does not include service or ports to repair damage caused by accidelll, misuse, abuse, negligence,
inodequote pocking or shipping procedures, commercial use, volUlge in excess oj the ruted maximum oj the unit,
cosmetic appearunce oj cabilletry 1101 directly attribuUlble to dejects in material or workmanship. This warronty does
not cover the elimination oj externally generuted static or noise, or the correction oj alltellna problems or weak
reception This WOrrollty does not cover lobor costs or damage to the Product caused by illStallatioll or removal oj
the Product. Definitive Technology makes no worronty with respect to its products purchased from dealers or outlets
other than Definitive Techllology Authorized Dealer.
o7082A100 06042010
Bp·8080ST Bp·8060ST Bp·8040ST Bp·8020ST
18Hz -30kHz 20Hz -30kHz 25Hz -30kHz 30Hz -30kHz
92dB 92dB 92dB 92dB
Nominal 8
Ohms Nominal 8 Ohms Nominal 8 Ohms Nominal 8 Ohms
20-400w 20-300w 20-300w 20-250w
400w 300w 300w 250w
lifier Power
400w 300w 300w
150w
1 1 1
12" 10" (25.4
eml
8" (20.32
eml
8" (20.32
eml
2 2 Vented
10" 25.4 eml 8" 20.32 eml
3 3 3
4.5" (11.43
eml 3.5" (8.9 eml 3.5" (8.9 eml
2 2 1
1" (2.54
eml 1" (2.54 eml 1" (2.54 eml
Technical Assistance
Service
It is our pleasure to offer assistance if you have any questions regarding your
Bipolar
STs or their set-up. Please contact your nearest Definitive Technology
dealer or call us directly
at [phone] (US &Canada), 01 [phone]
(all other countries) or e-mail [email protected]. Technical support is
offered in English_only. _
Definitive Technology Offices
11433 Cronridge Drive, Owings Mills, Maryland 21117
Phone: [phone]
(US &Canada), 01 [phone] (all other countries)
Service
and warranty work on your Definitive loudspeakers will normally be
performed
by your local Definitive Technology dealer. If, however, you wish to
return the speaker to us, please contact us first, describing the problem and
requesting authorization as well as the location of the nearest factory service
center.
Please note that the address given in this booklet is the address
of our offices only. Under no circumstances should loudspeakers be
shipped to our offices or returned without contacting us first and
obtaining return authorization.
,----------------------------------------------------------_ .. _---,
All tights reserved. I
------.J
:"Dejjnitive Technohgy®
The Leader in High· Performance Loudspeakers
8
CE
This product complies with the essential requirements
of the EMC directive 89/336/EEC.
Some states do not allow the exclusion or limitation of consequential or incidental damages, or implied warranties,
so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR PRODUCT.
DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT
ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH YOUR PRODUCT OR THIS WAR-
RANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS, IMPLIED,WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW ALL IMPLIED WAR-
RANTIES ON PRODUCT ARE LIMITED TO THE DURATION OF THIS EXPRESSED WARRANTY. DEFINI-
TIVE HAS NO LIABILITY FOR ACTS OF nnRD PARTIES. DEFINITIVE'S LIABILITY, WHETHER BASED
ON CONTRACT, TORT, STRICT LIABILITY, OR ANY OTHER THEORY, SHALL NOT EXCEED THE PUR-
CHASE PRICE OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO CIRCUM-
STANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. THE CONSUMER AGREES AND CONSENTS
THAT ALL DISPUTES BETWEEN THE CONSUMER AND DEFINITIVE SHALL BE RESOLVED IN
ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA DEFINITIVE
RESERVES THE RIGHT TO MODIFY nns WARRANTY STATEMENT AT ANY TIME.
©2009 DEI Sales Co.
..
For more information an Definitive Technology Loudspeakers and accessories, ~"
visit www.definitivetech.com. or email [email protected]. ~' _
Definitive Technology, Owings Mills, Maryland, USA. 800-228-7148 >-
THE WARRANTY IS AUTOMATICALLY VOID IF:
I) The product has been dall/oged, altered in any way. mishandled during tTrll/spartation. or tampered with.
2) The product is damaged due to accident,fire,j/ood, unreasonable use. misuse. abuse. customer
applied cleaners,Jailure to observe malluJacturers wornings, neglect or related events.
3) Repair or modificatioll oj the Producf has not been mode or authorized by Defillitive Technology
4) The product has beell improperly illStalled or used.
Product must be returned (insured and prepaid), together with the original dated proof of purchase to the Authorized
Limited Warranty: 5-Years for Drivers and Cabinets, 3-Years for Electronic Components
DEI Sales Co., dba Definitive Technology (herein "Definitive") warrants to the original retail purchaser only that Dealer from whom the Product was purchased, or to the nearest Definitive factory
this Defmitive loudspeaker product (the "Product") will be free from defects in material and workmanship for a peri- service center. Product must be shipped in the original shipping container or its equivalent Definitive is not respon-
od of five (5) years cover.ing the drivers and cabinets, and three (3) years for the electronic components from the date sible or liable for loss or damage to Product in transit
of
the original purchase from a Definitive Authorized Dealer. If the Product is defective in material or workmanship,
Definitive or its Authorized Dealer will, at its option, repair or replace the warranted product at no additional cbarge,
except as set forth below. All replaced parts and Product( s) become the property of Defmitive. Product that is
repaired or replaced under this warranty will be returned to you, within a reasonable time, freight collect. This war-
ranty is non-transferrable and is automatically void if the original purchaser sells or otherwise transfers the Product
to any other party.
This Warronty does not include service or ports to repair damage caused by accidelll, misuse, abuse, negligence,
inodequote pocking or shipping procedures, commercial use, volUlge in excess oj the ruted maximum oj the unit,
cosmetic appearunce oj cabilletry 1101 directly attribuUlble to dejects in material or workmanship. This warronty does
not cover the elimination oj externally generuted static or noise, or the correction oj alltellna problems or weak
reception This WOrrollty does not cover lobor costs or damage to the Product caused by illStallatioll or removal oj
the Product. Definitive Technology makes no worronty with respect to its products purchased from dealers or outlets
other than Definitive Techllology Authorized Dealer.
o7082A100 06042010

•
~ ~ ~
You could win a FREE powered subwoofer worth $400 retail value*
There are important benefits to registering your new Definitive Technology product:
•We'll automatically enter your name into amonthly drawing for aFREE $400 powered subwoofer*
•You'll have peace of mind knowing that we have apermanent record
of your product purchase for
warranty verification (with upload of receipt scan)
•You'll be assured of receiving service/upgrade alerts
•
It's fast and easy
• Privacy. The data we gather during on-line registration
is never sold
http://www.DefinitiveTech.com
*Definitive Technology ProSub 800 or equivalent. See Official Rules for Details. No purchase necessary.
Sweepstakes void outside the
SO United States and the District of Columbia, and where prohibited by law.
Failure to complete and submit the product registration form does not diminish your warranty rights.
Warranties apply as stated in the product manual. Please be sure to keep your original purchase receipt.
No Internet access?
ProSub 800
Call Definitive Technology Customer Service M-F 9:30 AM -6:00 PM US Eastern Standard Timeat [phone]. and we'll help you with the simple registration process.
Or you can send us aletter to Definitive Warranty Registration at the address below with your name, address, phone number, serial number(s) of the product(s) and
aphotocopy
of your sales receipt. Your name will be entered into the drawing regardless of how you choose to register.
DePnitive Te£hndngl
The Leader in High-Performance Loudspeakers
e
•
~ ~ ~
You could win a FREE powered subwoofer worth $400 retail value*
There are important benefits to registering your new Definitive Technology product:
•We'll automatically enter your name into amonthly drawing for aFREE $400 powered subwoofer*
•You'll have peace of mind knowing that we have apermanent record
of your product purchase for
warranty verification (with upload of receipt scan)
•You'll be assured of receiving service/upgrade alerts
•
It's fast and easy
• Privacy. The data we gather during on-line registration
is never sold
http://www.DefinitiveTech.com
*Definitive Technology ProSub 800 or equivalent. See Official Rules for Details. No purchase necessary.
Sweepstakes void outside the
SO United States and the District of Columbia, and where prohibited by law.
Failure to complete and submit the product registration form does not diminish your warranty rights.
Warranties apply as stated in the product manual. Please be sure to keep your original purchase receipt.
No Internet access?
ProSub 800
Call Definitive Technology Customer Service M-F 9:30 AM -6:00 PM US Eastern Standard Timeat [phone]. and we'll help you with the simple registration process.
Or you can send us aletter to Definitive Warranty Registration at the address below with your name, address, phone number, serial number(s) of the product(s) and
aphotocopy
of your sales receipt. Your name will be entered into the drawing regardless of how you choose to register.
DePnitive Te£hndngl
The Leader in High-Performance Loudspeakers
e

•
Definitive Techm!fJgy®
•
-
SUPERTOWERS FEATURING BUILT-IN POWERED SUBWOOFERS

>Forward Focused Bipolar ArrayTM technology -for a
three-dimensional lifelike sonic
image for every listener in
the room.
>Built-in powered subwoofers -for deep powerful bass
distributed
evenly throughout the room as well as
space-saving convenience.
>Second generation BDSSTM midrange drivers -for high
definition clarity, vanishingly
low distortion and ultimate
realism.
>Pure aluminum dome tweeters -for extended highs that
reveal nuance and shimmer without a trace of edginess.
Three
4- 1/2" second generation BDSS drivers
Two
1" aluminum tweeters
One 10' high excursion subwoofer
Two 10" low bass radiators
BP-8060ST SuperTower® FEATURES

Speakers on both the front and
the back of the enclosure radiate
sound like live musical instruments
The dramatic benefits: a huge
three-dimensional stereo soundstage for
every listener in the room
Definitive's bipolar speakers bring your music
to life!
BIPOLAR TECHNOLOGY

SAVES SPACE
EASIER SYSTEM SET-UP
BETTER PERFORMANCE
10" Active Subwoofer
300 Watt Digital Signal
Processing
Amplifier
Two 10" Low Bass Radiators
(Dacron damping material
omitted from illustration for
clarity)
BUILT-IN POWERED SUBWOOFER BENEFITS
>Saves space -eliminates the need for a separate
subwoofer
> More bass - two subwoofers in the room instead of just one
for simply more bass output.
>Evenly distributed bass - two subwoofers lessen the effects
of room induced "standing waves" that create bass "dead
zones" in various locations in a room. With two subwoofers
every listener in the room will hear deep, high impact bass.
>Better sounding bass -Definitive's built-in subwoofers are
perfectly integrated with the mid/high section so you don't
have to spend hours adjusting a subwoofer's crossover and
phase controls in pursuit of perfect
subwoofer-to-main-speaker "blending" and perfect sound.
All
you have to do is set the bass volume to match your
room and taste then sit back and enjoy audio perfection.
BUILT-IN POWERED SUBWOOFERS

BDSSTM
PATENTED
TECHNOLOGY
Balanced
Double
Surround
System
midrange
drivers
with
cast
basket
Pure Aluminum
Dome
Tweeters
Phase
Coherent
Crossover
Cast Aluminum Basket
Oversize High Gauss
Magnet
Injection
molded
Polymer
Composite
Cone
Linear Response -
Waveguide
Balanced
Double
Surround System
(BDSS)
---~
Sealed
MDF
Midrange
Enclosures
Double
Layer
MDF Baffle Panels
MDF Cross-brace
Stability Feet with
Carpet
Spikes
(Dacron
damping
material
omitted
from illustration for clarity)