DekPro EFFEX In-line User manual

DekPro™ EFFEX In-line
Connector Installation Guide
Step 1
Unscrew In-line connector module.
Step 2
Align In-line connector with perimeter wire.
Step 3
Screw In-line connector together until wire
is fully pierced and cap fully seated.
1 2 3
←
←
When using a perimeter wire around deck
Note: Ensure correct wire polarity is
maintained during installation
Visit www.dekpromfg.com for more information

DekPro™ EFFEX
Product Warranty
Should any product fail DekPro™ EFFEX reserves the right to
request return of the product, transportaon costs pre-paid, for
the purpose of inspecng the product to determine validity of the
claim. Upon validaon of a claim by DekPro™ Manufacturing,
replacement will be sent including transportaon costs.
Code compliance and applicability for intended use is the
responsibility of purchaser / installer.
EXCEPT AS OTHERWISE PROVIDED, DekPro™ Manufacturing
MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY IS NOT TRANSFERABLE.
DekPro™ Manufacturing’s liability is discharged upon repair or
replacement of defecve product. DekPro™ Manufacturing will
not be responsible for cost of removal and reinstallaon or
accidental and consequenal damages. Damages resulng from
misuse, abuse, alteraon, negligence or accidents are not
covered under this warranty.
For full warranty coverage details visit www.dekpromfg.com
DekPro Manufacturing Inc.
P.O. Box 18566
Minneapolis, MN 55418
1-855-433-5776