Dell EMC PowerEdge FC640 Manual

Dell EMC PowerEdge FC640
Installation and Service Manual
Regulatory Model: E02B
Regulatory Type: E02B005

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2017 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other
trademarks may be trademarks of their respective owners.
2018 - 10
Rev. A01

Contents
1 Dell EMC PowerEdge FC640 system overview............................................................................................... 7
Front view of the system.................................................................................................................................................. 7
Health status indicator.................................................................................................................................................8
Drive indicator codes................................................................................................................................................... 9
iDRAC Direct LED indicator codes............................................................................................................................10
Locating the Service Tag of your system................................................................................................................ 10
System information label.................................................................................................................................................. 11
2 Documentation resources.............................................................................................................................12
3 Technical Specications............................................................................................................................... 14
System dimensions...........................................................................................................................................................14
System weight.................................................................................................................................................................. 14
Processor specications.................................................................................................................................................. 14
Supported operating systems......................................................................................................................................... 14
System battery specications.........................................................................................................................................15
Memory specications.....................................................................................................................................................15
Mezzanine card specications........................................................................................................................................15
Storage controller specications.................................................................................................................................... 15
Drive specications.......................................................................................................................................................... 15
Hard drives.................................................................................................................................................................. 16
Ports and connectors specications.............................................................................................................................. 16
USB ports.................................................................................................................................................................... 16
Internal Dual SD Module ........................................................................................................................................... 16
Micro SD vFlash connector.......................................................................................................................................16
Video specications .........................................................................................................................................................16
Environmental specications...........................................................................................................................................17
Particulate and gaseous contamination specications ......................................................................................... 18
Standard operating temperature...............................................................................................................................19
Expanded operating temperature.............................................................................................................................19
4 Initial system setup and conguration...........................................................................................................21
Setting up your system.................................................................................................................................................... 21
iDRAC conguration.........................................................................................................................................................21
Options to set up iDRAC IP address.........................................................................................................................21
Log in to iDRAC..........................................................................................................................................................22
Options to install the operating system.........................................................................................................................22
Methods to download rmware and drivers...........................................................................................................23
Downloading drivers and rmware...........................................................................................................................23
5 Pre-operating system management applications..........................................................................................24
Options to manage the pre-operating system applications........................................................................................ 24
Contents 3

System Setup................................................................................................................................................................... 24
Viewing System Setup.............................................................................................................................................. 24
System Setup details.................................................................................................................................................25
System BIOS.............................................................................................................................................................. 25
iDRAC Settings utility................................................................................................................................................ 45
Device Settings.......................................................................................................................................................... 45
Dell Lifecycle Controller...................................................................................................................................................45
Embedded system management............................................................................................................................. 45
Boot Manager.................................................................................................................................................................. 45
Viewing Boot Manager..............................................................................................................................................45
Boot Manager main menu........................................................................................................................................ 46
One-shot UEFI boot menu........................................................................................................................................46
System Utilities...........................................................................................................................................................46
PXE boot...........................................................................................................................................................................46
6 Installing and removing system components................................................................................................ 47
Safety instructions........................................................................................................................................................... 47
Before working inside your system................................................................................................................................ 47
After working inside your system...................................................................................................................................47
Recommended tools........................................................................................................................................................ 47
Removing the system from the enclosure....................................................................................................................48
Installing the system into the enclosure........................................................................................................................49
Inside the system.............................................................................................................................................................. 51
Air shroud..........................................................................................................................................................................52
Removing the air shroud...........................................................................................................................................52
Installing the air shroud............................................................................................................................................. 53
Drives.................................................................................................................................................................................54
Removing a drive blank............................................................................................................................................. 54
Installing a drive blank............................................................................................................................................... 55
Removing a drive carrier........................................................................................................................................... 56
Installing a drive carrier..............................................................................................................................................57
Removing a drive from a drive carrier.....................................................................................................................58
Installing a drive into drive carrier............................................................................................................................ 59
Removing the drive cage.......................................................................................................................................... 60
Installing the drive cage............................................................................................................................................. 61
Drive backplane................................................................................................................................................................62
Removing the drive backplane................................................................................................................................. 62
Installing the drive backplane................................................................................................................................... 64
System memory............................................................................................................................................................... 67
System memory guidelines....................................................................................................................................... 67
General memory module installation guidelines......................................................................................................67
Mode-specic guidelines.......................................................................................................................................... 68
Removing a memory module.................................................................................................................................... 70
Installing a memory module....................................................................................................................................... 71
Processors and heat sinks...............................................................................................................................................72
Removing a processor and heat sink module......................................................................................................... 72
4Contents

Removing the processor from the processor and heat sink module...................................................................73
Installing the processor into a processor and heat sink module...........................................................................75
Installing a processor and heat sink module............................................................................................................77
M.2 SSD module.............................................................................................................................................................. 78
Removing the M.2 SSD module...............................................................................................................................78
Installing the M.2 SSD module................................................................................................................................. 79
Network Daughter Card..................................................................................................................................................80
Removing the Network Daughter Card.................................................................................................................. 80
Installing the Network Daughter Card......................................................................................................................81
Mezzanine card................................................................................................................................................................82
Removing the PCIe mezzanine card........................................................................................................................82
Installing the PCIe mezzanine card..........................................................................................................................83
Storage controller card ...................................................................................................................................................84
Removing the storage controller card..................................................................................................................... 84
Installing the storage controller card....................................................................................................................... 85
System battery.................................................................................................................................................................86
Replacing the NVRAM backup battery - Option A................................................................................................86
Replacing the NVRAM backup battery - Option B................................................................................................88
Optional internal USB memory key................................................................................................................................90
Replacing optional internal USB memory key.........................................................................................................90
IDSDM...............................................................................................................................................................................90
Removing the optional internal dual SD module ................................................................................................... 90
Installing the optional internal dual SD module........................................................................................................91
Removing the internal micro SD card......................................................................................................................92
Installing an internal micro SD card..........................................................................................................................92
System board....................................................................................................................................................................93
Removing the system board.....................................................................................................................................93
Installing the system board.......................................................................................................................................95
Trusted Platform Module.................................................................................................................................................97
Upgrading the Trusted Platform Module.................................................................................................................97
Initializing TPM for BitLocker users.........................................................................................................................98
Initializing the TPM 1.2 for TXT users..................................................................................................................... 99
Initializing the TPM 2.0 for TXT users.....................................................................................................................99
rSPI card........................................................................................................................................................................... 99
Removing the rSPI card............................................................................................................................................99
Installing the rSPI card.............................................................................................................................................100
7 Using system diagnostics........................................................................................................................... 102
Dell Embedded System Diagnostics.............................................................................................................................102
Running the Embedded System Diagnostics from Boot Manager.....................................................................102
Running the Embedded System Diagnostics from the Dell Lifecycle Controller..............................................102
System diagnostic controls..................................................................................................................................... 103
8 Jumpers and connectors............................................................................................................................ 104
System board jumpers and connectors....................................................................................................................... 104
System board jumper settings...................................................................................................................................... 105
Contents 5

Disabling a forgotten password.................................................................................................................................... 105
9 Getting help................................................................................................................................................107
Contacting Dell EMC......................................................................................................................................................107
Documentation feedback...............................................................................................................................................107
Accessing system information by using QRL.............................................................................................................. 107
Quick Resource Locator for the PowerEdge FC640 system..............................................................................108
Receiving automated support with SupportAssist ....................................................................................................108
Recycling or End-of-Life service information..............................................................................................................108
6 Contents

Dell EMC PowerEdge FC640 system overview
The PowerEdge FC640 is a half-height sled supported on the PowerEdge FX2/FX2s enclosure and supports up to :
• Two Intel Xeon Scalable Processors
• 2 x 2.5-inch hard drives or SSDs
• 16 DIMM slots
NOTE: All instances of SAS, SATA hard drives and SSDs are referred to as drives in this document, unless specied otherwise.
Topics:
• Front view of the system
• System information label
Front view of the system
The front view displays the features available on the front of the system.
Figure 1. Front view of the system
Table 1. Features available on the front of the system
Item Ports, panels, and
components
Icon Description
1 Hard drive/SSD N/A 2.5-inch hard drive/SSDs are supported. For more information, see
the Technical specications section.
2 USB port The USB port is USB 3.0 compliant.
3 iDRAC Direct port The iDRAC Direct port is micro USB 2.0-compliant. This port enables
you to access the iDRAC Direct features. For more information, see
1
Dell EMC PowerEdge FC640 system overview 7

Item Ports, panels, and
components
Icon Description
the Integrated Dell Remote Access Controller User's Guide at
Dell.com/poweredgemanuals .
4 iDRAC Direct LED
indicator
N/A The iDRAC Direct LED indicator lights up to indicate that the iDRAC
Direct port is actively connected to a device. For more information,
see the iDRAC Direct LED indicator codes section.
5 System handle release
button
N/A Enables you to unlock the system from the enclosure.
6. Status indicator Provides information about the status of the system. For more
information, see the Health status indicator section.
7 Power button Indicates if the system is turned on or o. Press the power button to
manually turn on or o the system.
NOTE: To gracefully shut down an ACPI-compliant
operating system, press the power button.
Health status indicator
The health status indicator indicates the health condition of the system.
Table 2. Health status indicator codes
Icon Health-status indicator pattern Condition
Solid blue No errors are present in the system. System is in good health.
Blinking blue Identify mode is enabled (regardless of system errors)—system is in
the process of identifying the system.
Solid amber System is in failsafe mode—system is not ready or available and
cannot be turned on.
Flashes amber Errors present in the system.
8 Dell EMC PowerEdge FC640 system overview

Drive indicator codes
Each drive carrier has an activity LED indicator and a status LED indicator. The indicators provide information about the current status of
the drive. The activity LED indicator indicates whether the drive is currently in use or not. The status LED indicator indicates the power
condition of the drive.
Figure 2. Drive indicators on the drive and the mid drive tray backplane
1Drive activity LED indicator 2 Drive status LED indicator
3 Drive Capacity Label
NOTE: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED indicator does not turn on.
Table 3. Drive indicator codes
Drive status indicator code Condition
Flashes green twice per second Identifying drive or preparing for removal.
O Drive ready for removal.
NOTE: The drive status indicator remains o until all drives are
initialized after the system is turned on. Drives are not ready
for removal during this time.
Flashes green, amber, and then turns o Predicted drive failure.
Flashes amber four times per second Drive failed.
Flashes green slowly Drive rebuilding.
Solid green Drive online.
Flashes green for three seconds, amber for three seconds, and
then turns o after six seconds
Rebuild stopped.
Dell EMC PowerEdge FC640 system overview 9

iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can congure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 4. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Condition
Solid green for two seconds Indicates that the laptop or tablet is connected.
Flashing green (on for two
seconds and o for two
seconds)
Indicates that the laptop or tablet connected is recognized.
Turns o Indicates that the laptop or tablet is unplugged.
Locating the Service Tag of your system
You can identify your system using the unique Express Service Code and Service Tag. The service tag information is available on a sticker
on the chassis of the system. This information is used by Dell EMC personnel to route support calls to the appropriate personnel.
The following image displays a sample service tag, which is available as a sticker on the side of the system.
Figure 3. Sample Service Tag
The following image displays a sample iDRAC MAC address label, which is available as a sticker on the side of the system.
Figure 4. Sample iDRAC MAC address
10 Dell EMC PowerEdge FC640 system overview

System information label
Figure 5. System information label
Dell EMC PowerEdge FC640 system overview 11

Documentation resources
This section provides information about the documentation resources for your system.
To view the document that is listed in the documentation resources table:
• From the Dell EMC support site:
a Click the documentation link that is provided in the Location column in the table.
b Click the required product or product version.
NOTE: To locate the product name and model, see the front of your system.
c On the Product Support page, click Manuals & documents.
• Using search engines:
– Type the name and version of the document in the search box.
Table 5. Additional documentation resources for your system
Task Document Location
Setting up your system For information about installing the system into the
enclosure, see the Getting Started Guide
document that is shipped with your system.
Dell.com/poweredgemanuals
Conguring your system For information about the iDRAC features,
conguring and logging in to iDRAC, and managing
your system remotely, see the Integrated Dell
Remote Access Controller User's Guide.
For information about understanding Remote
Access Controller Admin (RACADM)
subcommands and supported RACADM interfaces,
see the RACADM CLI Guide for iDRAC.
For information about Redsh and its protocol,
supported schema, and Redsh Eventing
implemented in iDRAC, see the Redsh API Guide.
For information about iDRAC property database
group and object descriptions, see the Attribute
Registry Guide.
Dell.com/poweredgemanuals
For information about earlier versions of the iDRAC
documents.
To identify the version of iDRAC available on your
system, on the iDRAC web interface, click ?>
About.
Dell.com/idracmanuals
For information about installing the operating
system, see the operating system documentation.
Dell.com/operatingsystemmanuals
2
12 Documentation resources

Task Document Location
For information about updating drivers and
rmware, see the Methods to download rmware
and drivers section in this document.
Dell.com/support/drivers
Managing your system For information about systems management
software oered by Dell, see the Dell OpenManage
Systems Management Overview Guide.
Dell.com/poweredgemanuals
For information about setting up, using, and
troubleshooting OpenManage, see the Dell
OpenManage Server Administrator User’s Guide.
Dell.com/openmanagemanuals > OpenManage
Server Administrator
For information about installing, using, and
troubleshooting Dell OpenManage Essentials, see
the Dell OpenManage Essentials User’s Guide.
Dell.com/openmanagemanuals > OpenManage
Essentials
For information about installing and using Dell
SupportAssist, see the Dell EMC SupportAssist
Enterprise User’s Guide.
Dell.com/serviceabilitytools
For information about partner programs enterprise
systems management, see the OpenManage
Connections Enterprise Systems Management
documents.
Dell.com/openmanagemanuals
For information about viewing inventory,
performing conguration and monitoring tasks,
remotely turning on or o servers, and enabling
alerts for events on servers and components using
the Dell Chassis Management Controller (CMC),
see the CMC User’s Guide.
Dell.com/openmanagemanuals > Chassis
Management Controllers
Working with the Dell
PowerEdge RAID controllers
For information about understanding the features
of the Dell PowerEdge RAID controllers (PERC),
Software RAID controllers, or BOSS card and
deploying the cards, see the Storage controller
documentation.
Dell.com/storagecontrollermanuals
Understanding event and error
messages
For information about the event and error
messages generated by the system rmware and
agents that monitor system components, see the
Error Code Lookup.
Dell.com/qrl
Troubleshooting your system For information about identifying and
troubleshooting the PowerEdge server issues, see
the Server Troubleshooting Guide.
Dell.com/poweredgemanuals
Documentation resources 13

Technical Specications
System dimensions
Figure 6. System dimensions
Table 6. System dimensions of the Dell EMC PowerEdge FC640 system
System X Y Z (handle closed)
Dell EMC PowerEdge FC640 211.0 mm (8.3-inches) 40.25 mm (1.58-inches) 535.75 mm (21.09-inches)
System weight
Table 7. Dell EMC PowerEdge FC640 system weight
System Maximum weight
2 x 2.5-inch drive 5.8 kg (12.79 lb)
Processor specications
The Dell EMC PowerEdge FC640 system supports up to two Intel Xeon Scalable Processors.
Supported operating systems
The PowerEdge FC640 supports the following operating systems:
3
14 Technical Specications

• Canonical Ubuntu Server LTS
• Citrix XenServer
• Microsoft Windows Server
• Microsoft Windows Server with Hyper-V
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
• VMware vSphere
• VMware ESXi
NOTE: For more information about the specic versions and additions, go to https://www.dell.com/support/home/Drivers/
SupportedOS/poweredge-fc640.
System battery specications
The Dell EMC PowerEdge FC640 system supports CR 2032 3.0-V lithium coin cell system battery.
Memory specications
Table 8. Memory specications
Memory module
sockets
DIMM
type DIMM rank DIMM capacity
Single processor Dual processors
Minimum
RAM
Maximum RAM Minimum RAM Maximum RAM
Sixteen 288-pins LRDIMM Quad rank 64 GB 64 GB 512 GB 128 GB 1024 GB
RDIMM Single rank 8 GB 8 GB 64 GB 16 GB 128 GB
RDIMM Dual rank 16 GB 16 GB 128 GB 32 GB 256 GB
RDIMM Dual rank 32 GB 32 GB 256 GB 64 GB 512 GB
Mezzanine card specications
The Dell EMC PowerEdge FC640 system supports two PCIe x8 Gen 3 slots mezzanine card supporting dual port 10 Gb Ethernet, quad
port 1 Gb, FC8 Fibre Channel, FC16 Fibre Channel, or Inniband mezzanine cards.
Storage controller specications
The Dell EMC PowerEdge FC640 system supports:
Internal Controllers: Software RAID S140,PERC9 H330,H730P
Boot Optimized Storage Subsystem:
• HWRAID 2 x M.2 SSDs 120GB, 240 GB
• Internal Dual SD Module optional
Drive specications
Technical Specications 15

Hard drives
The Dell EMC PowerEdge FC640 system supports up to two 2.5-inch SAS or SATA hard drives or PCIe SSDs. The hard drives or SSDs are
supplied in a hot-swappable drive carriers that t in the drive bays and these drives connect to the system board through the drive
backplane.
Ports and connectors specications
USB ports
The Dell EMC PowerEdge FC640 system supports:
• One USB 3.0-compliant port on the front of the system
• One micro USB/iDRAC direct USB 2.0-compliant port on the front of the system
• One USB 3.0-compliant internal port
NOTE: The micro USB 2.0-compliant port on the front of the system can only be used as an iDRAC Direct or a management port.
Internal Dual SD Module
The Dell EMC PowerEdge FC640 system supports two internal micro SD cards dedicated for the hypervisor. This card oers the following
features:
• Dual card operation — maintains a mirrored conguration by using micro SD cards in both slots and provides redundancy.
• Single card operation — single card operation is supported, but without redundancy.
NOTE: One IDSDM card slot is dedicated for redundancy. It is recommended to use Dell branded micro SD cards associated with
the IDSDM/micro SD vFlash congured systems.
Micro SD vFlash connector
The Dell EMC PowerEdge FC640 system supports one dedicated micro SD card for vFlash support.
Video specications
Table 9. Video specications
Features Specications
Video type Matrox G200 graphics controller integrated with iDRAC
Video memory 4 GB DDR4 shared with iDRAC application memory
16 Technical Specications

Environmental specications
NOTE: For additional information about environmental certications, please refer to the Product Environmental Datasheet
located with the Manuals & Documents on Dell.com/poweredgemanuals
Table 10. Temperature specications
Temperature Specications
Storage –40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
Maximum temperature gradient (operating and storage) 20°C/h (68°F/h)
Table 11. Relative humidity specications
Relative humidity Specications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be
non-condensing at all times.
Operating 10% to 80% relative humidity with 26°C (78.8°F) maximum dew point.
Table 12. Maximum vibration specications
Maximum vibration Specications
Operating 0.26 Grms at 5 Hz to 350 Hz (all operation orientations).
Storage 1.87 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested).
Table 13. Maximum shock specications
Maximum shock Specications
Operating Six consecutively executed shock pulses in the positive and negative x, y,
and z axes of 6 G for up to 11 ms.
Storage Six consecutively executed shock pulses in the positive and negative x, y,
and z axes (one pulse on each side of the system) of 71 G for up to 2 ms.
Table 14. Maximum altitude specications
Maximum altitude Specications
Operating 3048 m (10,000 ft)
Storage 12,000 m (39,370 ft)
Technical Specications 17

Table 15. Operating temperature de-rating specications
Operating temperature de-rating Specications
Up to 35°C (95°F) Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 m
(3,117 ft).
35°C to 40°C (95°F to 104°F) Maximum temperature is reduced by 1°C/175 m (1°F/319 ft) above 950 m
(3,117 ft).
40°C to 45°C (104°F to 113°F) Maximum temperature is reduced by 1°C/125 m (1°F/228 ft) above 950 m
(3,117 ft).
Particulate and gaseous contamination specications
The following table denes the limitations that help avoid any equipment damage or failure from particulates and gaseous contamination. If
the levels of particulates or gaseous pollution exceed the specied limitations and result in equipment damage or failure, you may need to
rectify the environmental conditions. Re-mediation of environmental conditions is the responsibility of the customer.
Table 16. Particulate contamination specications
Particulate contamination Specications
Air ltration Data center air ltration as dened by ISO Class 8 per ISO 14644-1 with a
95% upper condence limit.
NOTE: This condition applies to data center environments only. Air
ltration requirements do not apply to IT equipment designed to be
used outside a data center, in environments such as an oce or
factory oor.
NOTE: Air entering the data center must have MERV11 or MERV13
ltration.
Conductive dust Air must be free of conductive dust, zinc whiskers, or other conductive
particles.
NOTE: This condition applies to data center and non-data center
environments.
Corrosive dust • Air must be free of corrosive dust.
• Residual dust present in the air must have a deliquescent point less than
60% relative humidity.
NOTE: This condition applies to data center and non-data center
environments.
Table 17. Gaseous contamination specications
Gaseous contamination Specications
Copper coupon corrosion rate <300 Å/month per Class G1 as dened by ANSI/ISA71.04-1985.
Silver coupon corrosion rate <200 Å/month as dened by AHSRAE TC9.9.
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity.
18 Technical Specications

Standard operating temperature
Table 18. Standard operating temperature specications
Standard operating temperature Specications
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
Humidity percentage range 10% to 80% Relative Humidity with 26°C (78.8°F) maximum dew point.
Expanded operating temperature
Table 19. Expanded operating temperature specications
Expanded operating temperature Specications
Continuous operation 5°C to 40°C at 5% to 85% RH with 29°C dew point.
NOTE: Outside the standard operating temperature (10°C to
35°C), the system can operate continuously in temperatures as low
as 5°C and as high as 40°C.
For temperatures between 35°C and 40°C, de-rate maximum allowable dry
bulb temperature by 1°C per 175 m above 950 m (1°F per 319 ft).
Less than or equal to 1% of annual operating hours –5°C to 45°C at 5% to 90% RH with 29°C dew point.
NOTE: Outside the standard operating temperature (10°C to
35°C), the system can operate down to –5°C or up to 45°C for a
maximum of 1% of its annual operating hours.
For temperatures between 40°C and 45°C, de-rate maximum allowable
temperature by 1°C per 125 m above 950 m (1°F per 228 ft).
NOTE: When operating in the expanded temperature range, system performance may be impacted.
NOTE: When operating in the expanded temperature range, ambient temperature warnings maybe reported on the LCD panel
and in the System Event Log.
Expanded operating temperature restrictions
The expanded operating temperature restrictions for the FC640 system are listed here:
• Do not perform a cold startup below 5°C.
• The operating temperature specied is for a maximum altitude of 3048 metres (10,000 feet ).
• NVME drives are not supported.
• AEP DIMMs are not supported.
• 105 W/4 C, 115 W/6 C, 130 W/8 C, 140 W/14 C or higher wattage processor (TDP>140 W) are not supported.
• NEBS SKU processors higher than 85 W are not supported.
• Peripheral cards and /or peripheral cards greater than 25 W, that are not veried by Dell, are not supported.
Technical Specications 19

Thermal Restriction matrix
Table 20. Thermal restrictions matrix
Thermal Design Power (TDP)
for the processor
Core count Processors Ambient restriction
165W 28/26/18 8176; 8170; 6150 C30, DIMM limit 1*
150W 26/24/20 8164; 8160; 6148 C30
150W 16/12 6142; 6136; 8158 C30
140W 22/18 6152; 6140 C35
140W 14 6132 C30
130W 8 6134 C30
125W 20/16 6138; 6130; 8153 C35
125W 12 6126 C35
115W 6 6128 C30
105W 4 5122; 8156 C30
105W 14/12 5120; 5118 C40** E45***
85W 12/10/8/6/4 4116; 5115; 4114; 4110; 4108; 3106; 3104; 4112 C40** E45***
150W 24 8160T C25
125W 20 6138T C30
125W 16 6130T C30
125W 12 6126T C30
105W 14 5120T C30
85W 14 5119T C40** E45***
85W 12 4116T C40** E45***
85W 10 4114T C40** E45***
70W 8 4109T C40** E45***
* DIMM limit 1 – Max 64 GB LRDIMMs. No 128 GB, No AEP(Apache Pass). This is applicable only for systems with dual processors.
**C indicates that the processor is continuously operating at the specied temperature or lower.
***E indicates the expanded operating temperature specied for the processor.
20 Technical Specications