Dell EMC VxRail P580N User manual

Dell EMC VxRail Appliances on Dell
PowerEdge Servers
Version 01
VxRail P580N Owner's Manual
Rev 01
December 2019

Copyright ©2019 Dell Inc. or its subsidiaries. All rights reserved.
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS-IS.” DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND
WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED
IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell Technologies, Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property
of their respective owners. Published in the USA.
Dell EMC
Hopkinton, Massachusetts 01748-9103
1-508-435-1000 In North America 1-866-464-7381
www.DellEMC.com
2Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

Introduction 5
Revision history.................................................................................................. 6
About this guide..................................................................................................6
Support...............................................................................................................6
Registering for online support................................................................6
Where to go for support resources.........................................................7
Using SolVe Online for VxRail Series procedures....................................7
Locating your appliance serial number.................................................................7
Looking up your VxRail Appliance serial number in VxRail Manager........7
Locating the Service Tag of your system............................................... 8
VxRail documentation......................................................................................... 9
Product overview 11
Chassis overview............................................................................................... 12
Front view of the system...................................................................................12
Rear view of the system.................................................................................... 13
NIC indicator codes.............................................................................. 13
Power supply unit indicator codes........................................................ 14
Drive indicator codes......................................................................................... 17
Inside the system...............................................................................................18
System board diagnostic LED indicators............................................................19
Technical specifications 23
Chassis dimensions........................................................................................... 24
Chassis weight..................................................................................................24
Processor specifications................................................................................... 25
PSU specifications............................................................................................25
System battery specifications...........................................................................25
Expansion card riser specifications................................................................... 25
Memory specifications......................................................................................26
RAID controller specifications........................................................................... 27
Drive specifications...........................................................................................27
Drives...................................................................................................27
Optical drives....................................................................................... 27
Tape drives...........................................................................................27
Ports and connectors specifications................................................................. 28
USB ports............................................................................................ 28
NIC ports............................................................................................. 28
Serial connector...................................................................................28
VGA ports............................................................................................ 28
IDSDM or vFlash module......................................................................29
Video specifications.......................................................................................... 29
Environmental specifications............................................................................ 29
Standard operating temperature...........................................................31
Expanded operating temperature..........................................................31
Particulate and gaseous contamination specifications .........................32
Initial setup and configuration 35
Chapter 1
Chapter 2
Chapter 3
Chapter 4
CONTENTS
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 3

Pre-operating system management applications 37
Options to manage the pre-operating system applications................................38
iDRAC configuration......................................................................................... 38
Log in to iDRAC....................................................................................38
Replacing and adding hardware 39
Using SolVe Online for VxRail Series procedures.............................................. 40
Supported hardware components.....................................................................40
System memory................................................................................................40
General memory module installation guidelines.................................... 42
PCIe Risers and slots........................................................................................ 43
Expansion card installation guidelines...................................................43
Chapter 5
Chapter 6
Contents
4Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

CHAPTER 1
Introduction
lRevision history.......................................................................................................................6
lAbout this guide...................................................................................................................... 6
lSupport................................................................................................................................... 6
lLocating your appliance serial number.....................................................................................7
lVxRail documentation..............................................................................................................9
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 5

Revision history
The following table lists the revision history for this document.
Table 1 Revision history
Date Revision Description of change
December 10, 2019 01 Initial release.
About this guide
This document describes the VxRail P580N Appliance hardware, lists technical specifications, and
describes high-level operations.
The target audience for this document includes customers, field personnel, and partners who want
to operate and maintain a VxRail P580N Appliance. This document is designed for people familiar
with:
lDell EMC systems and software
lVMware virtualization products
lData center appliances and infrastructure
Support
Create an Online Support account to get access to support and product resources for your VxRail
Appliance.
If you already have an account, register your VxRail Appliance to access the available resources.
For convenience, you can link your Online Support account with VxRail Manager and access
support resources without having to log in separately.
Note: If you plan to set up Secure Remote Services, your Online Support account must be
linked to VxRail Manager under the same party ID or the deployment will fail. Your appliance
must also be in an installed state in the Install Base.
Registering for online support
Create an Online Support account to access support resources.
About this task
After you register, you can:
lRegister your system
lObtain product license files and software updates
lDownload VxRail Series product documentation
lAccess SolVe Online for VxRail, or download the SolVe Desktop application for hardware
replacement and upgrade procedures
lBrowse the VxRail Series community and support information
lLink your support account for access to resources from within VxRail Manager
Introduction
6Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

Procedure
1. Point your Web browser to www.emc.com/vxrailsupport (or http://www.dell.com/
support).
2. Fill in your first name, last name, email, and preferred password.
3. Select whether you would like to subscribe to email updates.
4. Click Create an Account.
Support will send you a confirmation email, typically within 48 hours.
Where to go for support resources
Access support resources for your VxRail Appliance by doing any of the following:
lIn the vSphere Client, select VxRail from the menu and use the Support functions on the
VxRail Dashboard.
lPoint your Web browser to www.emc.com/vxrailsupport (or https://www.dell.com/support).
Using SolVe Online for VxRail Series procedures
Step-by-step instructions for procedures such as replacing hardware or performing system
administrative tasks are available through SolVe Online and the SolVe Desktop application.
CAUTION To avoid potential data loss, refer to the VxRail Series procedures in SolVe Online or
the SolVe Desktop application before performing any hardware replacement or upgrade
activity.
Access SolVe Online for VxRail through your Web browser.
For more information about SolVe for VxRail, refer to KB 525271.
You must have an online support account to use SolVe Online.
Locating your appliance serial number
To get support for your appliance, use the VxRail Appliance serial number, also called the Product
Serial Number Tag (PSNT). The PSNT is a 14-digit number used to identify individual appliances to
Dell EMC support.
Note: Only use the VxRail Appliance serial number to contact Customer Support. Sometimes,
you may need to supply the 7-digit Service Tag number.
There are two identification tags on your appliance:
lThe VxRail appliance serial number—You can find the serial number in VxRail Manager, or
printed on the information tag.
lThe Service Tag — You can find the Service Tag printed on the physical appliance.
Looking up your VxRail Appliance serial number in VxRail Manager
Follow these steps to look up your VxRail Appliance serial number in VxRail Manager.
Procedure
1. On the main page of the vSphere Client click Hosts and Clusters in the left navigation bar.
2. Select your VxRail cluster.
3. Select the Monitor tab.
4. Select VxRail > Appliances from the inner left navigation bar.
Introduction
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 7

5. Click Open physical view for this cluster.
6. Observe the VxRail Appliance serial number, listed under each appliance ID.
The serial number is also called the "PSNT".
Figure 1 VxRail Appliance serial number (PSNT)
Locating the Service Tag of your system
You can identify your system using the unique Express Service Code and Service Tag. Pull out the
information tag in the front of the system to view the Express Service Code and Service Tag.
Alternatively, the information may be on a sticker on the chassis of the system.
The mini Enterprise Service Tag (EST) is found on the back of the system. This information is used
by Dell to route support calls to the appropriate personnel.
Figure 2 Locating Service Tag of your system
1. Information tag (top view)
2. Information tag (bottom view)
3. OpenManage Mobile (OMM) label (optional)
4. iDRAC MAC address and iDRAC secure password label
Note: If you have opted for secure default access to iDRAC, the iDRAC secure
default password is available on the back of the system Information tag. This
section of label will be blank, if you have not opted for secure default access to
iDRAC, then the default user name and password are root and calvin.
5. Service Tag
Introduction
8Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

VxRail documentation
The following table lists available documents about VxRail Manager and VxRail Appliances.
Table 2 VxRail Documentation
Document Description
SolVe Online for VxRail (Login required) Step-by-step instructions for
procedures such as replacing hardware or performing
system administrative tasks are available through SolVe
Online and the SolVe Desktop application.
For more information about SolVe for VxRail, refer to KB
525271.
VxRail Appliance 4.7.x Administration Guide
VxRail Appliance 4.5.x Administration Guide
These document describe the VxRail Appliance, how it
works, and how to perform administrative tasks.
VxRail 4.7.x Release Notes
VxRail 4.5.x Release Notes
(Login required) These documents contain a brief
description of VxRail Manager releases, including lists of
known issues and workarounds.
VxRail Support Matrix This document provides information about supported
software, firmware, and hardware versions for Dell EMC
VxRail appliances based on Dell PowerEdge hardware,
including the E Series, P Series, S Series, and V Series.
VxRail Appliance Owner’s Manuals
lVxRail Appliances on 14th Generation PowerEdge
Servers P Series, V series, and S Series Owner's
Manual
lVxRail Appliances on 14th Generation PowerEdge
Servers E Series Owner's Manual
lVxRail G560 and G560F Owner's Manual
lVxRail 60 Series Appliance Owner's Manual
lVxRail 100 Series and 200 Series Appliance Owner's
Manual
lVxRail G Series Appliance Owner's Manual
These documents describe the various VxRail appliances,
including their physical features and technical
specifications.
VxRail Appliance Getting Started Guides
lVxRail G560 and G560F Getting Started Guide
lVxRail E Series Appliance Getting Started With Your
Appliance
lVxRail P Series, S Series, and V Series Appliances
Getting Started With Your Appliance
These documents describe considerations for unpacking
and preparing to install VxRail appliances.
VxRail Appliance API User Guide This document describes the API for the VxRail
Appliance versions 4.5.x and 4.7.x.
VxRail Event Code Reference (Login required) This reference guide lists the alert and
event codes generated by VxRail Manager.
Introduction
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 9

Table 2 VxRail Documentation (continued)
Document Description
VxRail Security Configuration Guide (Login required) This guide provides an overview of the
configuration, deployment, and usage settings needed to
ensure secure operation of the VxRail Appliance.
VxRail Appliance STIG Compliance Guide (Login required) This document provides guidance on the
secure installation and secure use of the VxRail Appliance
for the DoDIN Approved Products List (APL)
Deployment Configuration.
VxRail vCenter Server Planning Guide This planning guide discusses guidance for the various
vCenter Server deployment options supported on VxRail
Appliances.
VxRail Planning Guide for Virtual SAN Stretched Cluster This planning guide provides better insights into the
requirements necessary for VxRail to implement Virtual
SAN Stretched Cluster.
vSAN 2-Node Cluster on VxRail Planning Guide This guide provides information for the planning of a
VMware vSAN 2-Node Cluster infrastructure on a VxRail
platform. (Not for VCF on VxRail solution deployments.)
VxRail Networking Guide with Dell EMC S4148-ON
Switches
The deployment guide covers the process of connecting
a cluster of VxRail nodes to Dell EMC Networking S4148-
ON switches in a high-availability configuration.
VxRail Network Planning Guide This is a network planning and consideration guide for
the VxRail. It provides valuable insight into supported
switch requirements and the networking required to
support VxRail.
Networking Guides > VxRail Networking Solutions The networking guides provided on this website assist
with the deployment of your infrastructure and the
optimal connectivity of your Dell EMC Networking
products. Click VxRail Networking Solutions for specific
VxRail solutions.
VxRail Fabric Automation SmartFabric Services User
Guide
This solution brief provides an overview of how VxRail
works with HCI network fabrics using Dell OS10
Enterprise Edition SmartFabric services. (Not for VCF on
VxRail solution deployments.)
Introduction
10 Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

CHAPTER 2
Product overview
The VxRail P580N Appliance is a 4-socket, 2U rack system designed to run complex workloads
using highly scalable memory, I/O capacity, and network options. The VxRail P580N features the
latest Intel Xeon Scalable Processor family, up to 48 DIMM slots, PCI Express 3.0 enabled
expansion slots, and a choice of network interface technologies to cover NIC and network
daughter cards.
Figure 3 VxRail P580N Appliance
lChassis overview....................................................................................................................12
lFront view of the system....................................................................................................... 12
lRear view of the system.........................................................................................................13
lDrive indicator codes..............................................................................................................17
lInside the system................................................................................................................... 18
lSystem board diagnostic LED indicators................................................................................ 19
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 11

Chassis overview
The VxRail P580N is a 4-socket, 2U rack appliance with up to 48 DIMM slots, storage capacity of
up to 24 drive slots, and the Intel Xeon Scalable Processor Family processors.
The VxRail P580N appliance is available in the following chassis configurations:
Table 3 VxRail P580N chassis options
Chassis options Configurations
Twenty-four drive chassis Up to twenty-four 2.5-inch NVMe front
accessible drives in slots 0–23
Front view of the system
Figure 4 Front view 24 x 2.5-inch drive system
1. Left control panel
2. Drives
3. Right control panel
4. Service Tag
Note: For more information about the ports and connectors, see the Technical Specifications
section.
Product overview
12 Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

Rear view of the system
Figure 5 Rear view of the 24 x 2.5-inch drive system
1. Riser 1 - Full-height PCIe expansion card (Slot 1 and 2)
2. Half-height PCIe expansion card slots located on the system board (Slot 3 and 4)
3. Riser 2 -Full-height PCIe expansion card slots (Slot 5 and 6)
4. Power supply units (2)
5. System identification button
6. iDRAC9 dedicated port
7. USB 3.0 ports (2)
8. VGA port
9. Serial port
10. NIC ports (2 or 4)
11. Rear handle
Note: For more information about the ports and connectors, see the Technical Specifications
section.
NIC indicator codes
Each NIC on the back of the system has indicators that provide information about the activity and
link status. The activity LED indicator indicates if data is flowing through the NIC, and the link LED
indicator indicates the speed of the connected network.
Figure 6 NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
Product overview
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 13

The NIC indicators table describes different NIC indicator codes and condition of the connectivity.
Table 4 NIC indicator codes
Status Condition
Link and activity indicators are off. The NIC is not connected to the network.
Link indicator is green, and activity
indicator is blinking green.
The NIC is connected to a valid network at its
maximum port speed, and data is being sent or
received.
Link indicator is amber, and activity
indicator is blinking green.
The NIC is connected to a valid network at less than
its maximum port speed, and data is being sent or
received.
Link indicator is green, and activity
indicator is off.
The NIC is connected to a valid network at its
maximum port speed, and data is not being sent or
received.
Link indicator is amber, and activity
indicator is off.
The NIC is connected to a valid network at less than
its maximum port speed, and data is not being sent
or received.
Link indicator is blinking green, and
activity is off.
NIC identify is enabled through the NIC
configuration utility.
Power supply unit indicator codes
AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator.
The DC PSUs have an LED that serves as an indicator.
The indicator shows whether power is present or if a power fault has occurred.
Figure 7 AC PSU status indicator
1. AC PSU status indicator/handle
This table describes the AC PSU status indicators and the condition of the PSU when the power
indicator light is green, blinking green, blinking amber, and when it is not lit.
Table 5 AC PSU status indicator codes
Power indicator codes Condition
Green A valid power source is connected to the PSU,
and the PSU is operational.
Blinking amber Indicates a problem with the PSU.
Not illuminated Power is not connected to the PSU.
Product overview
14 Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

Table 5 AC PSU status indicator codes (continued)
Power indicator codes Condition
Blinking green When the firmware of the PSU is being
updated, the PSU handle blinks green.
CAUTION Do not disconnect the power
cable, or unplug the PSU when updating
firmware. If firmware update is
interrupted, the PSUs do not function.
Blinking green and turns off When hot-plugging a PSU, the PSU handle
blinks green five times at a rate of 4 Hz and
turns off. This indicates a PSU mismatch
concerning efficiency, feature set, health
status, or supported voltage.
CAUTION If two PSUs are installed, both
the PSUs must have the same type of
label; for example, Extended Power
Performance (EPP) label. Mixing PSUs
from previous generations of PowerEdge
servers is not supported, even if the PSUs
have the same power rating. This results
in a PSU mismatch condition, or failure to
turn on the system.
CAUTION When correcting a PSU
mismatch, replace only the PSU with the
blinking indicator. Swapping the PSU to
make a matched pair can result in an error
condition and unexpected system
shutdown. To change from a high output
configuration to a low output
configuration or conversely, you must turn
off the system.
CAUTION AC PSUs support both 240 V
and 120 V input voltages except for
Titanium PSUs, which support only 240 V.
When two identical PSUs receive
different input voltages, they can output
different wattages, and trigger a
mismatch.
CAUTION If two PSUs are used, they
must be of the same type and have the
same maximum output power.
CAUTION Combining AC and DC PSUs is
not supported and triggers a mismatch.
Product overview
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 15

Figure 8 DC PSU status indicator
1. DC PSU status indicator
This table describes the DC PSU status indicators and the condition of the PSU when the power
indicator light is green, blinking green, blinking amber, and when it is not lit.
Table 6 DC PSU status indicator codes
Power indicator codes Condition
Green A valid power source is connected to the PSU,
and the PSU is operational.
Blinking amber Indicates a problem with the PSU.
Not illuminated Power is not connected to the PSU.
Blinking green When hot-plugging a PSU, the PSU indicator
blinks green. This indicates that there is a
PSU mismatch about efficiency, feature set,
health status, or supported voltage.
CAUTION If two PSUs are installed, both
the PSUs must have the same type of
label; for example, Extended Power
Performance (EPP) label. Mixing PSUs
from previous generations of PowerEdge
servers is not supported, even if the PSUs
have the same power rating. This results
in a PSU mismatch condition, or failure to
turn on the system.
CAUTION When correcting a PSU
mismatch, replace only the PSU with the
blinking indicator. Swapping the PSU to
make a matched pair can result in an error
condition and unexpected system
shutdown. To change from a High Output
configuration to a Low Output
configuration or conversely, you must turn
off the system.
Product overview
16 Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

Table 6 DC PSU status indicator codes (continued)
Power indicator codes Condition
CAUTION If two PSUs are used, they
must be of the same type and have the
same maximum output power.
CAUTION Combining AC and DC PSUs is
not supported and triggers a mismatch.
Drive indicator codes
Each drive carrier has an activity LED indicator and a status LED indicator. The indicators provide
information about the current status of the drive. The activity LED indicator indicates whether the
drive is currently in use or not. The status LED indicator indicates the power condition of the drive.
Figure 9 Drive indicators
1. Drive activity LED indicator
2. Drive status LED indicator
3. Drive
Note: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED
indicator does not turn on.
The drive indicator codes table describes the indicator codes: flashing green twice per second, Off,
flashes green, amber, and then turns off, flashes amber four times per second, flashes green
slowly, solid green, flashes green for three seconds, amber for three seconds, and then turns off
after six seconds.
Table 7 Drive indicator codes
Drive status indicator code Condition
Flashes green twice per second Identifying drive or preparing for removal.
Off Drive ready for removal.
Product overview
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 17

Table 7 Drive indicator codes (continued)
Drive status indicator code Condition
Note: The drive status indicator remains off
until all drives are initialized after the
appliance is turned on. Drives are not ready
for removal during this time.
Flashes green, amber, and then turns off Predicted drive failure.
Flashes amber four times per second Drive failed.
Flashes green slowly Drive rebuilding.
Solid green Drive online.
Flashes green for three seconds, amber for
three seconds, and then turns off after six
seconds
Rebuild stopped.
Inside the system
Note: Components that are hot swappable have orange touch points and the components that
are not hot swappable have blue touch points.
Figure 10 Inside the system
1. Drive backplane
2. SAS Expander board
3. Cooling fans (6)
Product overview
18 Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual

Figure 10 Inside the system (continued)
4. System board
5. Full-height expansion card Riser 2
6. Full-height expansion card Riser 1
7. Intrusion switch
System board diagnostic LED indicators
The system board LED indicators provide status of the system when it is powered on, which help
identify POST and hardware issues.
Below table shows what the LED status indicates.
Table 8 LED status
○LED Off
●LED on
BBlinking LED
*
LED Off : PFAULT
LED Blink : FAILSAFE Timeout
LED On : FAILSAFE Strike Out
This table describes power-up LED sequence.
Table 9 Power-up LED sequence
Power-Up Sequence
LED7 LED6 LED5 LED4 LED3 LED2 LED1 Description
○○○○○○●2.5V_AUX EN. Waiting for 2.5V_AUX PG
○○○○○●○1.8V_AUX EN. Waiting for 1.8V_AUX PG
○○○○○●●5V SW EN. CKMNG EN. Waiting for 5V SW PG
○○○○●○○V_PVNN EN. Waiting for V_PVNN PG
○○○○●○●1.05V SW EN. Waiting for 1.05V SW PG
○○○○●●○V_VSBM EN. Waiting for V_VSBM PG
○○○○●●●V_VSB11 EN. Waiting for V_VSB11 PG
○○○●○○●Waiting for PCH_SLP_SUS_N. PCH_RSMRST_N still asserted
○○○●○●○Config check. Waiting for BMC to boot. PCH_RSMRST_N de-
asserted
○○○●○●●Waiting for PWR button
○○○●●○○12V EN. Waiting for PSU* PG
○○○●●●●3.3V_AB EN. Waiting for 3.3V A+B PG
○○●○○○○BP VRs EN. Waiting for BP* PG
Product overview
Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual 19

Table 9 Power-up LED sequence (continued)
○○●○○○●MEM VPP EN. Waiting for MEM VPP PGs
○○●○○●○MEM VDDQ EN. Waiting for MEM VDDQ PGs
○○●○○●●MEM VTT EN. Waiting for MEM VTT PGs
○○●○●○○CPU* VCCIO and PCIe clocks EN. Waiting for CPU VCCIO PGs
○○●○●○●CPU* VCORE/VSA EN. Waiting for CPU* VCORE+VSA PGs
○○●○●●○Waiting for NDC PG
○○●○●●●Waiting for PCH PROCPWRGD
○○●●○○○CPU* PG Asserted. SYS PWRGOOD Asserted
●●●●●●●RUN State
○○●●○●○PLTRST_N Asserted
○○●●○●●CPU & MEM VR’s Shutdown
○○●●●○○MAIN Rails Shutdown (7 seconds)
This table describes system board LED sequence.
Table 10 System board LED sequence
Error
LED7 LED6 LED5 LED4 LED3 LED2 LED1 Description
B○○○○○B Config Error: CPU1 present? DIMMs OK? Install DBG JMPR1 to
bypass
BB○○○B B CPU IERR
○●●●●●○CPU COMBINED MCERR
B B B B B B B Thermal Issue on CPU* or MEM
B○BBB○B Internal VR Issue on CPU*
B○○●○○B AUX Power Failsafe
This table describes the Pfault or failsafe errors LED sequence.
Table 11 Pfault or failsafe errors LED sequence
Pfault or Failsafe Errors
LED7 LED6 LED5 LED4 LED3 LED2 LED1 Description
* B ○○○○○12V Failure
* B ○○○○●5V BP0 Failure
* B ○○○●○5V BP1 Failure
* B ○○○●●5V BP2 Failure
* B ○○●○○3.3V A Failure
* B ○○●○●3.3V B Failure
* B ○○●●○5V SW Failure
Product overview
20 Dell EMC VxRail Appliances on Dell PowerEdge Servers VxRail P580N Owner's Manual