Dell EMC PowerEdge R340 Manual

Dell EMC PowerEdge R340
Installation and Service Manual
Regulatory Model: E58S Series
Regulatory Type: E58S001

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
2019 - 10
Rev. A04

1 About this document.....................................................................................................................7
2 Dell EMC PowerEdge R340 system overview.................................................................................. 8
Front view of the system......................................................................................................................................................8
Control panels.................................................................................................................................................................. 9
Rear view of the system..................................................................................................................................................... 10
Inside the system................................................................................................................................................................. 10
Locating the information tag of your system....................................................................................................................11
System Information label.....................................................................................................................................................12
3 PowerEdge R340 initial system setup and configuration.................................................................16
Setting up your system....................................................................................................................................................... 16
iDRAC configuration............................................................................................................................................................ 16
Options to set up iDRAC IP address............................................................................................................................16
Log in to iDRAC.............................................................................................................................................................. 16
Options to install the operating system.............................................................................................................................17
Methods to download firmware and drivers...............................................................................................................17
Downloading drivers and firmware...............................................................................................................................18
4 PowerEdge R340 Pre-operating system management applications..................................................19
Options to manage the pre-operating system applications............................................................................................19
System Setup....................................................................................................................................................................... 19
Viewing System Setup...................................................................................................................................................19
System Setup details..................................................................................................................................................... 19
System BIOS.................................................................................................................................................................. 20
iDRAC Settings utility....................................................................................................................................................36
Device Settings..............................................................................................................................................................36
Dell Lifecycle Controller......................................................................................................................................................36
Embedded system management................................................................................................................................. 36
Boot Manager...................................................................................................................................................................... 36
Viewing Boot Manager..................................................................................................................................................36
Boot Manager main menu.............................................................................................................................................37
One-shot UEFI boot menu............................................................................................................................................37
System Utilities...............................................................................................................................................................37
PXE boot...............................................................................................................................................................................37
5 PowerEdge R340 installing and removing system components....................................................... 38
Safety instructions.............................................................................................................................................................. 38
Before working inside your system................................................................................................................................... 38
After working inside your system...................................................................................................................................... 38
Recommended tools........................................................................................................................................................... 39
Front bezel........................................................................................................................................................................... 39
Removing the optional front bezel.............................................................................................................................. 39
Installing the optional front bezel.................................................................................................................................40
Contents
Contents 3

System cover.......................................................................................................................................................................40
Removing the system cover........................................................................................................................................ 40
Installing the system cover............................................................................................................................................41
Air shroud............................................................................................................................................................................. 42
Removing the air shroud...............................................................................................................................................42
Installing the air shroud................................................................................................................................................. 43
Cooling fans..........................................................................................................................................................................44
Removing the cooling fan blank...................................................................................................................................44
Installing the cooling fan blank..................................................................................................................................... 44
Removing a cooling fan.................................................................................................................................................45
Installing a cooling fan................................................................................................................................................... 46
Drives.................................................................................................................................................................................... 46
Removing a drive blank.................................................................................................................................................46
Installing the drive blank................................................................................................................................................47
Removing the drive carrier........................................................................................................................................... 47
Installing the drive carrier..............................................................................................................................................48
Removing the drive from the drive carrier................................................................................................................. 49
Installing the drive into the drive carrier..................................................................................................................... 50
Removing a 2.5 inch drive from the 3.5 inch drive adapter......................................................................................51
Installing a 2.5 inch drive into the 3.5 inch drive adapter.........................................................................................52
Intrusion switch................................................................................................................................................................... 53
Removing the intrusion switch.................................................................................................................................... 53
Installing the intrusion switch.......................................................................................................................................54
System memory...................................................................................................................................................................54
System memory guidelines...........................................................................................................................................55
General memory module installation guidelines......................................................................................................... 56
Removing a memory module........................................................................................................................................56
Installing a memory module.......................................................................................................................................... 57
Expansion cards and expansion card risers......................................................................................................................58
Expansion card installation guidelines......................................................................................................................... 58
Removing the expansion card riser.............................................................................................................................60
Installing the expansion card riser................................................................................................................................ 61
Removing an expansion card from the expansion card riser................................................................................... 62
Installing an expansion card into the expansion card riser....................................................................................... 63
Storage controller card.......................................................................................................................................................65
Removing the PERC card.............................................................................................................................................65
Installing the PERC card...............................................................................................................................................65
System battery ................................................................................................................................................................... 66
Replacing the system battery...................................................................................................................................... 66
Optional internal USB memory key................................................................................................................................... 68
Replacing the optional internal USB memory key..................................................................................................... 68
Optional optical drive.......................................................................................................................................................... 68
Removing the optical drive...........................................................................................................................................68
Installing the optional optical drive.............................................................................................................................. 69
Processor and heat sink......................................................................................................................................................70
Removing the heat sink................................................................................................................................................ 70
Removing the processor................................................................................................................................................71
Installing the processor................................................................................................................................................. 72
Installing the heat sink...................................................................................................................................................72
Optional IDSDM or vFlash module.....................................................................................................................................73
4Contents

Removing the optional IDSDM or vFlash card........................................................................................................... 74
Installing optional IDSDM or vFlash card.................................................................................................................... 74
Removing the MicroSD card........................................................................................................................................75
Installing the MicroSD card.......................................................................................................................................... 76
M.2 SSD module.................................................................................................................................................................. 77
Removing the M.2 SSD module...................................................................................................................................77
Installing the M.2 SSD module..................................................................................................................................... 77
Drive backplane....................................................................................................................................................................78
Drive backplane..............................................................................................................................................................78
Removing the drive backplane.....................................................................................................................................79
Installing the drive backplane....................................................................................................................................... 80
Cable routing.........................................................................................................................................................................81
Power supply unit................................................................................................................................................................82
Hot spare feature.......................................................................................................................................................... 82
Removing a power supply unit blank...........................................................................................................................83
Installing a power supply unit blank............................................................................................................................. 83
Removing a power supply unit.....................................................................................................................................84
Installing a power supply unit....................................................................................................................................... 84
Power distribution board.................................................................................................................................................... 85
Removing the power distribution board..................................................................................................................... 85
Installing the power distribution board........................................................................................................................86
System board....................................................................................................................................................................... 87
Removing the system board.........................................................................................................................................87
Installing the system board...........................................................................................................................................89
Trusted Platform Module................................................................................................................................................... 90
Upgrading the Trusted Platform Module................................................................................................................... 90
Initializing TPM for BitLocker users.............................................................................................................................92
Initializing the TPM 1.2 for TXT users......................................................................................................................... 92
Initializing the TPM 2.0 for TXT users........................................................................................................................ 92
Control panel........................................................................................................................................................................92
Removing the left control panel.................................................................................................................................. 92
Installing the left control panel.....................................................................................................................................93
Removing the right control panel................................................................................................................................ 94
Installing the right control panel.................................................................................................................................. 95
6 PowerEdge R340 jumpers and connectors ................................................................................... 97
System board connectors.................................................................................................................................................. 97
System board jumper settings...........................................................................................................................................98
Disabling forgotten password............................................................................................................................................ 98
7 Technical specifications.............................................................................................................100
Chassis dimensions............................................................................................................................................................100
System weight.................................................................................................................................................................... 101
Processor specifications....................................................................................................................................................101
PSU specifications..............................................................................................................................................................101
Cooling fans specifications................................................................................................................................................ 101
System battery specifications..........................................................................................................................................102
Expansion card riser specifications..................................................................................................................................102
Memory specifications...................................................................................................................................................... 102
Contents 5

Storage controller specifications..................................................................................................................................... 102
Drive specifications............................................................................................................................................................103
Drives.............................................................................................................................................................................103
Optical drives................................................................................................................................................................103
Ports and connectors specifications............................................................................................................................... 103
USB ports specifications.............................................................................................................................................103
NIC ports specifications.............................................................................................................................................. 103
Serial connector specifications...................................................................................................................................104
VGA ports specifications.............................................................................................................................................104
IDSDM module..............................................................................................................................................................104
Video specifications...........................................................................................................................................................104
Environmental specifications............................................................................................................................................104
Standard operating temperature............................................................................................................................... 105
Expanded operating temperature.............................................................................................................................. 106
Particulate and gaseous contamination specifications............................................................................................106
8 System diagnostics and indicator codes ..................................................................................... 108
System health and system ID indicator codes............................................................................................................... 108
iDRAC Direct LED indicator codes...................................................................................................................................109
NIC indicator codes........................................................................................................................................................... 109
Power supply unit indicator codes....................................................................................................................................110
Drive indicator codes...........................................................................................................................................................111
PowerEdge R340 system diagnostics.............................................................................................................................. 111
Dell Embedded System Diagnostics............................................................................................................................111
9 Getting help.............................................................................................................................. 113
Recycling or End-of-Life service information..................................................................................................................113
Contacting Dell....................................................................................................................................................................113
Accessing system information by using QRL.................................................................................................................. 113
Quick Resource Locator for Dell EMC PowerEdge R340 system..........................................................................114
Receiving automated support with SupportAssist ........................................................................................................114
10 Documentation resources......................................................................................................... 115
6Contents

About this document
This document provides an overview about the system, information about installing and replacing components, technical specifications,
diagnostic tools, and guidelines to be followed while installing certain components.
1
About this document 7

Dell EMC PowerEdge R340 system overview
The Dell EMC PowerEdge R340 system is a 1U server that supports:
• One Intel Xeon, or Core i3, Pentium, or Celeron Processor
• Four DIMM slots
• Two AC power supply units
• Up to eight 2.5-inch or four 3.5-inch SAS, SATA drives.
For more information, see the Technical specifications section.
NOTE: All instances of SAS, SATA drives, and SSDs are referred to as drives in this document, unless specified
otherwise.
Topics:
•Front view of the system
•Rear view of the system
•Inside the system
•Locating the information tag of your system
•System Information label
Front view of the system
NOTE: The 8 x 2.5-inch configuration is shorter than the 4 x 3.5-inch configuration.
Figure 1. Front view of the 8 x 2.5-inch drive system
1. Left control panel 2. Optical drive (optional)
3. Right control panel 4. Information tag
5. Drives (8)
Figure 2. Front view of the 4 x 3.5-inch drive system
1. Left control panel 2. Optical drive (optional)
3. Right control panel 4. Information tag
5. Drives (4)
2
8 Dell EMC PowerEdge R340 system overview

For more information about the ports, see the Technical Specifications section.
Control panels
Left control panel
Figure 3. Left control panel view
1. System health and system ID indicator
Right control panel
Figure 4. Right control panel view
1. Power button 2. USB 2.0-compliant port
3. iDRAC direct Micro USB port
NOTE: For more information on the ports, see the Ports and connectors specifications section.
Dell EMC PowerEdge R340 system overview 9

Rear view of the system
Figure 5. Rear view of the system
1. Serial port 2. NIC port (GB 1)
3. NIC port (GB 2) 4. Half-height PCIe expansion card slot
5. Full-height PCIe expansion card slot 6. Power supply unit 1
7. Power supply unit 2 8. System identification button
9. System status indicator cable port (CMA) 10. USB 3.0 port (2)
11. iDRAC9 dedicated network port 12. VGA port
NOTE: For more information about the ports and connectors, see the Ports and connectors specifications section.
Inside the system
Figure 6. Inside the system
1. Intrusion switch 2. Optical drive
10 Dell EMC PowerEdge R340 system overview

3. Power distribution board 4. PERC card
5. Expansion card riser 6. Heat sink
7. Memory module sockets 8. System board
9. Fan (4) 10. Drive backplane
Locating the information tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. You can view the Express Service Code and Service
Tag by pulling out the information tag located on the front of the system. Alternatively, the information may be on the Mini Enterprise
Service Tag (MEST) label on the chassis, on the rear of the system. This information is used by Dell to route support calls to the
appropriate personnel.
Figure 7. Locating Service Tag of your system
1. Information tag (front view) 2. Information tag (back view)
3. OpenManage Mobile (OMM) label 4. iDRAC MAC address and iDRAC secure password label
5. Service Tag, Express Service Code, QRL label
Dell EMC PowerEdge R340 system overview 11

System Information label
PowerEdge R340 – System Information Label
Figure 8. Front and rear view configuration
Figure 9. Jumper settings
12 Dell EMC PowerEdge R340 system overview

Figure 10. Memory information
Dell EMC PowerEdge R340 system overview 13

Figure 11. System information
14 Dell EMC PowerEdge R340 system overview

Figure 12. Electrical overview
Dell EMC PowerEdge R340 system overview 15

PowerEdge R340 initial system setup and
configuration
Setting up your system
Perform the following steps to set up your system:
Steps
1. Unpack the system.
2. Install the system into the rack. For more information about installing the system into the rack, see the Rail Installation Guide at
www.dell.com/poweredgemanuals.
3. Connect the peripherals to the system.
4. Connect the system to its electrical outlet.
5. Power on the system by pressing the power button or by using iDRAC.
6. Power on the attached peripherals.
For more information about setting up your system, see the Getting Started Guide that shipped with your system.
iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the
overall availability of Dell systems. iDRAC alerts administrators about system issues and enables them to perform remote system
management. This reduces the need for physical access to the system.
Options to set up iDRAC IP address
To enable communication between your system and iDRAC, you must first configure the network settings based on your network
infrastructure.
NOTE: For static IP configuration, you must request for it at the time of purchase.
This option is set to DHCP by Default. You can set up the IP address by using one of the following interfaces:
Interfaces Document/Section
iDRAC Settings
utility
Dell Integrated Dell Remote Access Controller User's Guide at www.dell.com/poweredgemanuals
Dell Deployment
Toolkit
Dell Deployment Toolkit User’s Guide at www.dell.com/openmanagemanuals > OpenManage Deployment Toolkit
Dell Lifecycle
Controller
Dell Lifecycle Controller User’s Guide at www.dell.com/poweredgemanuals
NOTE: To access iDRAC, ensure that you connect the ethernet cable to the iDRAC9 dedicated network port. You can
also access iDRAC through the shared LOM mode, if you have opted for a system that has the shared LOM mode
enabled.
Log in to iDRAC
You can log in to iDRAC as:
• iDRAC user
3
16 PowerEdge R340 initial system setup and configuration

• Microsoft Active Directory user
• Lightweight Directory Access Protocol (LDAP) user
If you have opted for secure default access to iDRAC, you must use the iDRAC secure default password available on the system
Information tag. If you have not opted for secure default access to iDRAC, then use the default user name and password –root and
calvin. You can also log in by using your Single Sign-On or Smart Card.
NOTE: You must have the iDRAC credentials to log in to iDRAC.
NOTE: Ensure that you change the default user name and password after setting up the iDRAC IP address.
For more information about logging in to the iDRAC and iDRAC licenses, see the latest Integrated Dell Remote Access Controller User's
Guide at www.dell.com/poweredgemanuals.
You can also access iDRAC by using RACADM. For more information, see the RACADM Command Line Interface Reference Guide at
www.dell.com/poweredgemanuals.
Options to install the operating system
If the system is shipped without an operating system, install a supported operating system by using one of the following resources:
Table 1. Resources to install the operating system
Resources Location
iDRAC www.dell.com/idracmanuals
Lifecycle Controller www.dell.com/idracmanuals > Lifecycle Controller
OpenManage Deployment Toolkit www.dell.com/openmanagemanuals > OpenManage Deployment
Toolkit
Dell certified VMware ESXi www.dell.com/virtualizationsolutions
Installation and How-to videos for supported operating systems on
PowerEdge systems
Supported Operating Systems for Dell EMC PowerEdge systems
Methods to download firmware and drivers
You can download the firmware and drivers by using any of the following methods:
Table 2. Firmware and drivers
Methods Location
From the Dell EMC support site www.dell.com/support/home
Using Dell Remote Access Controller Lifecycle Controller (iDRAC
with LC)
www.dell.com/idracmanuals
Using Dell Repository Manager (DRM) www.dell.com/openmanagemanuals > Repository Manager
Using Dell OpenManage Essentials www.dell.com/openmanagemanuals > OpenManage Essentials
Using Dell OpenManage Enterprise www.dell.com/openmanagemanuals > OpenManage Enterprise
Using Dell Server Update Utility (SUU) www.dell.com/openmanagemanuals > Server Update Utility
Using Dell OpenManage Deployment Toolkit (DTK) www.dell.com/openmanagemanuals > OpenManage Deployment
Toolkit
Using iDRAC virtual media www.dell.com/idracmanuals
PowerEdge R340 initial system setup and configuration 17

Downloading drivers and firmware
Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management firmware on your system.
Prerequisites
Ensure that you clear the web browser cache before downloading the drivers and firmware.
Steps
1. Go to www.dell.com/support/home.
2. In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box, and then
click Submit.
NOTE: If you do not have the Service Tag, select Detect Product to allow the system to automatically detect the
Service Tag, or click View products, and navigate to your product.
3. Click Drivers & Downloads.
The drivers that are applicable to your system are displayed.
4. Download the drivers to a USB drive, CD, or DVD.
18 PowerEdge R340 initial system setup and configuration

PowerEdge R340 Pre-operating system
management applications
You can manage basic settings and features of a system without booting to the operating system by using the system firmware.
Topics:
•Options to manage the pre-operating system applications
•System Setup
•Dell Lifecycle Controller
•Boot Manager
•PXE boot
Options to manage the pre-operating system
applications
Your system has the following options to manage the pre-operating system applications:
• System Setup
• Dell Lifecycle Controller
• Boot Manager
• Preboot Execution Environment (PXE)
System Setup
By using the System Setup screen, you can configure the BIOS settings, iDRAC settings, and device settings of your system.
NOTE: Help text for the selected field is displayed in the graphical browser by default. To view the help text in the text
browser, press F1.
You can access system setup by one of the following:
• Standard graphical browser—The browser is enabled by default.
• Text browser—The browser is enabled by using Console Redirection.
Viewing System Setup
To view the System Setup screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
System Setup details
The System Setup Main Menu screen details are explained as follows:
4
PowerEdge R340 Pre-operating system management applications 19

Option Description
System BIOS Enables you to configure BIOS settings.
iDRAC Settings Enables you to configure the iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI (Unified
Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using the iDRAC settings
utility. For more information about this utility, see Integrated Dell Remote Access Controller User’s Guide at
www.dell.com/poweredgemanuals.
Device Settings Enables you to configure device settings.
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, set the SATA
mode, and enable or disable USB ports.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If the operating system begins to load before you press F2, wait for the system to finish booting, and then
restart the system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option Description
System
Information
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor
Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings Specifies options to specify the Boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot settings.
Network Settings Specifies options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
Integrated Devices Specifies options to manage integrated device controllers and ports, specifies related features and options.
Serial
Communication
Specifies options to manage the serial ports, its related features and options.
System Profile
Settings
Specifies options to change the processor power management settings, memory frequency.
System Security Specifies options to configure the system security settings, such as system password, setup password, Trusted
Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the system.
20 PowerEdge R340 Pre-operating system management applications