Dell PowerConnect W-IAP175P User manual

Dell PowerConnect W-Series
Instant Access Point
Quick Start Guide
This Quick Start Guide will assist you to quickly connect and configure Dell
PowerConnect W-Series Instant Access Point (IAP). To learn more about Dell
PowerConnect W-Series Instant Access Points and for detailed configuration
information, see the Dell PowerConnect W-Series Instant Access Point 6.1.2.3-
2.0.0.0 User Guide at support.dell.com/manuals.
Getting Started
1. Get an IP address—You will require an IP address to connect to a network. To
get an IP address from a DHCP server in your network:
a. Connect the IAP to an intermediate gateway router or switch that has
connectivity to the DHCP server.
b. Power on the IAP. The IAP receives an IP address provided by the switch or
router. Power the IAP either by plugging to an Ethernet cable coming from
a 802.3af Power over Ethernet (PoE) switch or device, or by connecting it to
an AC adapter.
Note: Use the Enet0 port on W-IAP134/135 for uplink connections to a switch or
router. The Enet1 port does not provide wired connectivity.
Note: After the IAP starts up, it will try to do DHCP if static IP configuration is not
available. If DHCP times out, a default IP within 169.254.x.y/16 subnet will be
configured on the IAP.
2. Connect to the provisioning Wi-Fi network—Connect a wireless enabled
client to the provisioning Wi-Fi network. The provisioning network name is
instant. Table 1 shows how to find the instant wireless network using Windows
7 or Mac OS. Click the wireless network icon and select instant network.
Table 1 Connect to the provisioning network in Microsoft Windows and
Apple Mac OS)
3. Log in to the Dell PowerConnect W-Series Instant Access Point WebUI—
Open a web browser and navigate to instant.dell-pcw.com/ to access the Dell
Instant login screen. If you enter any other URL, you are redirected to the Dell
PowerConnect W-Series Instant Access Point login screen. In the login screen,
as shown in Figure 1, enter the following credentials:
Username - admin
Password - admin
Figure 1 WebUI Login Screen
4. Select the Country Code—A Country Code box, as shown in Figure 2 might
appear after you successfully log in to the WebUI. Select your country code
from the drop-down menu.
Figure 2 Country Code box
Creating a Network
Dell PowerConnect W-Series Instant Access Point Access Point user interface is a
standard web based interface that allows you to configure and monitor an IAP
network.
5. In the Network window, click the New link, as shown in Figure 3.
Figure 3 Instant User Interface
6. The New Network window appears, as shown in Figure 4.
Figure 4 New Network window
7. In the Basic Info tab, shown in Figure 4, enter a name for the network in the
Name (SSID) text box. Click Next to continue.
8. In the Security tab, shown in Figure 5, enter a passphrase in the Passphrase and
Retype fields. Click Next to continue.
Apple Mac OSMicrosoft Windows
Note: The Country Code option will not appear, and cannot be set for IAPs
designated for US, Japan, and Israel.
Note: It is recommended that you note the passphrase for future use.

Dell PowerConnect W-Series Instant Access Point | Quick Start Guide
Part Number 0510939-01 | January 2012
Dell PowerConnect
W-Series
Instant Access Point
Quick Start Guide
Contacting Support
Web Support
Main Site www.dell.com
Support Site support.dell.com
Dell Documentation support.dell.com/manuals
Copyright
© 2012 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®,
Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility
Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.
All rights reserved. Specifications in this manual are subject to change without notice.
Originated in the USA. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code
subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL), or other Open
Source Licenses. The Open Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate
other vendors’ VPN client devices constitutes complete acceptance of liability by that individual or corporation for
this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against
it with respect to infringement of copyright on behalf of those vendors.
Figure 5 Security tab
9. In the Access tab, the default option is Unrestricted. For information about the
Network-based and Role-based access rule settings, see the Dell PowerConnect
W-Series Instant Access Point 6.1.2.3-2.0.0.0 User Guide at support.dell.com/
manuals.
Figure 6 Access tab
10. Click Finish to close the window. The new network that you created is now added
to the Networks window.
Verifying WebUI and LEDs
After setting up Dell PowerConnect W-Series Instant Access Point and adding a
network, you can use the WebUI and the LEDs to verify the operating status of the
Dell PowerConnect W-Series Instant Access Point.
Using the WebUI—Verify the newly created network is displayed in the Networks
window, as shown in Figure 7.
Figure 7 Verify the newly added wireless network
11. Disconnect client from the instant provisioning network.
12. Connect client to the network you created, as described in step2.
13. Login to the Dell PowerConnect W-Instant Access Point WebUI, as in step3.
The instant provisioning network is automatically deleted and should no longer be
present.
Using LEDs—Use the LEDs to verify the operating status of the IAP. The LED
functionality is described in the Install Guide included with your Dell Instant
Access Point in the section titled Verifying Post-Installation Connectivity.
PWR: Steady Green indicating that power is on and the device is ready.
ENET: Green or Amber (depending on Ethernet link speed).
11A/N: Steady Green or OFF, indicating the state of the 5GHz radio.
11B/G/N: Steady Green, indicating the state of the 2.4GHz radio.
Note: For additional security level options, refer to the Dell PowerConnect
W-Series Instant Access Point 6.1.2.3-2.0.0.0 User Guide.
Note: It is recommended that you change the administrator login password.
For more information, see Management Authentication Settings in the
Dell PowerConnect W-Series Instant Access Point 6.1.2.3-2.0.0.0 User Guide at
support.dell.com/manuals.
Note: Use the Enet0 port on W-IAP134/135 for uplink connections to a switch or
router. The Enet1 port does not provide wired connectivity.