Delta Associate DIGITAL PROJECTION E-VISION LASER 5900... User manual

Rev A September2020
E-Vision Laser 5900 Series
High Brightness Digital Video Projector
INSTALLATION & QUICK START GUIDE
CONNECTION GUIDE
OPERATING GUIDE
REFERENCE GUIDE
121-183A

DigitalProjection E-Vision Laser5900 Series Aboutthis document
About this document
Follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.
Symbols used in this document
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
LASER WARNING: this symbol indicates that there is a potential hazard of eye exposure to laser radiation unless the instructions are closely followed.
ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely followed.
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features without prior
notice.
Additional Documentation
Updates to this manual may be available online.
Please use the QR code (also located on the projector) to access the latest E-Vision projector user guides and other documentation via the Digital
Projection website.
Or visit the products specification page on the Digital Projection website to download the latest user guide and other documentation.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their respective owners. Digital Projection disclaims any proprietary interest in
trademarks and trade names other than its own.
Copyright © 2020 Digital Projection All rights reserved.
Rev A September2020
page 2
Introduction
Notes

Electrical and PhysicalSpecifications DigitalProjection E-Vision Laser5900 Series
Electrical and Physical Specifications
Mains Voltage 100-240VAC 50/60Hz 5.3A
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Operating Humidity 10% to 85% non-condensing
Storage Humidity 5% to 95% non-condensing
Dimensions L:445.6mm (17.54in) X W: 360mm (14.17in) X H 163.5mm (6.43in)
Weight 11Kg (24.2lb) including lens
Power Consumption at 100VAC: 500W typical (normal mode)
at 240VAC: 480W typical (normal mode)
Standby Power <2W (With LAN enabled), <0.5W (Without LAN enabled)
Thermal Dissipation at 100VAC: 1706BTU/Hour typical (Normal mode)
at 240VAC: 1638BTU/Hour typical (Normal mode)
Fan Noise 36dBA typical, 38dBA max (Normal mode)
Specifications are subject to change without notice.
Introduction Rev A September2020
page 3
Notes

DigitalProjection E-Vision Laser5900 Series Opticalradiation
Optical radiation
Projector
RG2
CAUTION: Do not look into the lens
CLASS 3R LASER PRODUCT
This Laser Product is designated as Class 3R during all procedures of operation.
LASER LIGHT - AVOID DIRECT EYE EXPOSURE.
Caution - possibly hazardous optical radiation emitted from this product. Direct or scattered light can be hazardous to eyes and skin.
Do not stare at operating light source.
Do not point laser or allow laser light to be directed or reflected toward other people or reflective objects.
There is a potential hazard of eye exposure to laser radiation if the included instructions are not followed.
Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Non-laser emission. There remains non-laser emission from the projection lens.
This projector is tested according to IEC/EN62471-5:2015 (Photobiological safety of lamps and lamp systems – Part 5: Image projectors standard) and is Risk Group 2 (low risk).
Remote Control Unit - Presentation Laser Pointer
Caution - possibly hazardous optical Laser radiation emitted from this product.
Class 2 laser product.
Wave Length: 640-660nm. Max Output: less than 1 mW.
Do not stare into the beam.
Do not view directly with optical instruments.
Do not point laser or allow laser light to be directed or reflected towards people, animals, transportation or reflective objects.
Only allow use by responsible persons.
Keep out of reach of children.
This device is not a toy.
Rev A September2020
page 4
Introduction
Notes

Laserinformation DigitalProjection E-Vision Laser5900 Series
Laser information
Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Location of Laser Aperture
1
1. The laser aperture is located as indicated below.
Be careful not to expose the eye to direct laser light.
Introduction Rev A September2020
page 5
Notes

DigitalProjection E-Vision Laser5900 Series Laserinformation
Laser Parameters
Wavelength 450-460nm (Blue)
Mode of operation Pulsed, due to frame rate
Pulse duration 1.34ms
Pulse repetition rate 120Hz
Maximum pulse energy 0.698mJ
Total internal power >100W
Apparent source size >10mm, at lens stop
Divergence >100 mili Radian
Laser Pointer Parameters
Wavelength 640-660nm
Max Output <1mW
Rev A September2020
page 6
Introduction
Notes

ProductLabels DigitalProjection E-Vision Laser5900 Series
Product Labels
Projector
Explanatory Label
E-Vision Laser 5900 WUXGA
Manufacturers ID Label
E-Vision User Guides
Follow link for Projector Documentation
この二次元バーコードをスキャンしてプロジェクターのデータを取得してください
请扫描条码来取得投影机的文件
프로젝터 설명서를 보려면 링크를 팔로우하십시오
Suivre le lien pour accéder à la documentation du projecteur
Produktdokumentation nden Sie unter dem Link
User Guides Label
Laser Aperture Label
Introduction Rev A September2020
page 7
Notes

DigitalProjection E-Vision Laser5900 Series ProductLabels
Remote Control
激 光 辐 射 勿直视激光 束
2类 激 光 产 品
波 长 ：6 4 0 - 6 6 0 n m
最 大 输 出 ：1 m W
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 640-660nm
MAX OUTPUT: <1mW
CLASS II LASER PRODUCT
ÉVITEZ L'EXPOSITION - UN RAYONNEMENT LASER
EST ÉMIS PAR CETTE OUVERTURE RAYONNEMENT LASER
NE REGARDEZ PAS DIRECTEMENT LE RAYONNEMENT
ADVANCETECH CO., LTD (FACTORY)
11/F-1, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei
City 23584, Taiwan, R.O.C.
WAVELENGTH:640-660nm
MAX OUTPUT:<1mw
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50 dated June
24.2007. IEC/EN60825-1:2007
P/N: SN1411010 Product code:1512010
IEC/EN 60825-1:2007 IEC/EN 60825-1:2014
波 長 ：6 4 0 - 6 6 0 n m
最 大 輸 出 ：1m W
雷 射 輻 射 勿注視波束
等級2雷射產品
Remote Control Label
Rev A September2020
page 8
Introduction
Notes

ProductLabels DigitalProjection E-Vision Laser5900 Series
Label Locations
2
1
1. Location of Hazard
Warning Symbol and
Laser Aperture Label on
the body of the projector.
2. Location of Manufacturer’s
ID Label and Explanatory
Label with Certification
Statement and Risk
Statement on the body of
the projector.
Introduction Rev A September2020
page 9
Notes

DigitalProjection E-Vision Laser5900 Series ProductLabels
3
3. Location of Remote Control Label on the back of the remote.
Rev A September2020
page 10
Introduction
Notes

InterlockSwitches DigitalProjection E-Vision Laser5900 Series
Interlock Switches
1
Interlock switches are installed at the main frame, inside the cover. These will power-off the
system individually when activated.
1. Will be activated when the top cover is removed.
Introduction Rev A September2020
page 11
Notes

DigitalProjection E-Vision Laser5900 Series Introduction
Introduction
Congratulations on your purchase of this Digital Projection product. Your projector has the following key features:
lWUXGA native resolution delivering 5,900 ISO lumens.
lUp to 20,000:1 contrast ratio.
lLong life laser light source
l24/7 Operation
lRec 709 color gamut capability
lSupport for Frame Sequential, Top and Bottom, Side-By-Side, and Frame Packing 3D.
lHDBaseT® for transmission of uncompressed High Definition Video up to 100 m from the source.
lCornerstone, Vertical & Horizontal Keystone.
lControl via LAN and RS232.
lConstant brightness mode maintains light output at selected levels.
lBuilt in speakers
A serial number is located on the side of the projector. Please record it here for future reference:
Rev A September2020
page 12
Introduction
Notes

Contents DigitalProjection E-Vision Laser5900 Series
About this document 2
Symbols used in this document 2
Product revision 2
Additional Documentation 2
Legal notice 2
Electrical and Physical Specifications 3
Optical radiation 4
Projector 4
Remote Control Unit - Presentation Laser Pointer 4
Laser information 5
Location of Laser Aperture 5
Laser Parameters 6
Laser Pointer Parameters 6
Product Labels 7
Projector 7
Remote Control 8
Label Locations 9
Interlock Switches 11
Introduction 12
Contents 13
What's in the box? 16
Connecting the power supply 17
Projector overview 18
Control panel 19
Projector indicators 20
Remote control 21
Infrared reception 24
Positioning the screen and projector 25
Roll and pitch 26
Operating the projector 27
Switching the projector on 27
Switching the projector off 27
Selecting an input signal 27
Selecting a test pattern 27
Adjusting the lens 28
Adjusting the image 28
Orientation 28
Geometry 28
Picture 28
Adjusting the audio 29
Signal inputs 32
Digital inputs and outputs 32
EDID on the HDMI, and HDbaseT inputs 33
Using HDMI / HDBaseT switchers with the projector 33
Analog inputs and outputs 34
3D connections 35
3D Sync 36
Control connections 37
LAN connection examples 38
RS232 connection example 39
Using the menus 42
Opening the Menu 42
Opening a submenu 42
Exiting menus and closing the OSD 43
Inside the Menu 44
Accessing sub menus 44
Editing projector settings 45
Executing commands 45
Using a slider to set a value 45
Editing numeric values 46
Using the projector 47
Image Menu 47
Computer 48
Advanced 48
White Balance 49
Color Manager 49
Color manager parameters explained 50
Introduction Rev A September2020
page 13
Notes
Contents

DigitalProjection E-Vision Laser5900 Series Contents
Settings 1 Menu 51
Audio 51
Alignment 52
Keystone 52
Keystone settings 53
Keystone example 53
4 Corner 54
Advanced 1 55
3D Setting 56
3D types 57
3D Sync Invert 57
Advanced 2 57
Settings 2 Menu 58
Status 59
Network 59
Advanced 2 60
Air Filter Settings 60
Served web pages 61
Screen requirements 66
Fitting the image to the display 66
WUXGA images displayed full width 66
WUXGA images displayed with a height of 1200 pixels 66
WUXGA images displayed full height 67
Diagonal screen sizes 67
Positioning the image 68
Aspect ratios explained 69
Aspect ratios examples 69
Source: 4:3 69
Source: 16:9 70
Source: 16:10 (native) 70
Aspect ratio example: TheatreScope 71
Appendix A: projector indicator messages 72
Vertical offset 73
Projection distance and size table 73
Appendix B: supported signal input modes 74
2D formats 74
3D formats 76
Appendix C: wiring details 77
Signal inputs and outputs 77
HDMI 77
HDBaseT input 77
VGA input 78
Control connections 78
LAN 78
RS232 79
Appendix D: glossary of terms 80
Rev A September2020
page 14
Introduction
Notes

Rev A September2020
E-Vision Laser 5900 Series
High Brightness Digital Video Projector
INSTALLATION & QUICK START GUIDE
121-183A

DigitalProjection E-Vision Laser5900 Series What's in the box?
What's in the box?
Make sure your box contains
everything listed. If any pieces are
missing, contact your dealer.
Only one remote is supplied with
the projector.
Save and store the original box and
packing materials, in case you ever
need to ship your projector.
Only the appropriate cable for
destination territory is supplied with
the projector
Projector Remote Control Batteries (2xAAA)
Important Information Book VGA Cable
Power Cable, UK Power Cable, Europe Power Cable, North America Power Cable, China
Rev A September2020
page 16
Installation & QuickStart Guide
Notes

Connectingthe power supply DigitalProjection E-Vision Laser 5900 Series
Connecting the power supply
Use only the power cable
provided.
Ensure that the power outlet
includes a ground connection
as this equipment MUST be
earthed.
Handle the power cable
carefully and avoid sharp
bends. Do not use a damaged
power cable.
1
1. Firmly push the mains connector into the AC In socket
1
Installation & QuickStart Guide Rev A September2020
page 17
Notes

DigitalProjection E-Vision Laser5900 Series Projectoroverview
Projector overview
10
11
12
13
14
Rear View
4
1
2
3
6
7
5
9
8
Front View
15
Bottom View
1. Horizontal lens shift
control
2. Zoom control
3. Vertical lens shift control
4. Control panel
5. Indicators
6. Front infrared window
7. Focus control
8. Internal Speaker
9. Air inlet
10. Mains socket
11. Connections panel
12. Air outlet
13. Rear infrared window
14. Internal Speaker
15. Adjustable feet
Rev A September2020
page 18
Installation & QuickStart Guide
Notes

Controlpanel DigitalProjection E-Vision Laser5900 Series
Control panel
1
2
3
4
5
POWER
Control Panel
1. AUTO
Optimizes the image size, position and resolution
2. Arrow buttons & ENTER
Navigation buttons used to highlight menu entries in the OSD. Press ENTER to open or
execute the highlighted menu entry.
Adjusts keystone when OSD is off. Left and right adjust horizontal keystone, up and down
adjust vertical keystone.
3. SOURCE
Displays and exits the source menu
4. POWER
Switches the projector on and off (STANDBY).
5. MENU
Displays and exits the OSD.
Installation & QuickStart Guide Rev A September2020
page 19
Notes

DigitalProjection E-Vision Laser5900 Series Controlpanel
Projector indicators
1 2 3
Indicators
1
POWER On = projector is switched on
Flashing = starting up or cooling down
2
LIGHT On = error
3
TEMP. On = error
Rev A September2020
page 20
Installation & QuickStart Guide
Notes