Kodak LUMA 350 User manual

Quick Start Guide

CONTENTS
EN
INTRODUCTION
PRODUCT OVERVIEW
CHARGING THE PROJECTOR
POWERING THE PROJECTOR ON/OFF
ADJUSTING FOCUS
ADJUSTING VOLUME
CONNECTING TO EXTERNAL DEVICES
CONNECTING TO WIRELESS NETWORKS
SCREEN MIRRORING (ANROID/WINDOWS - MIRACAST®)
CUSTOMER SERVICE CONTACT INFORMATION
FR
PRESENTATION
VUE D'ENSEMBLE
CHARGER LE PROJECTEUR
MISE EN MARCHE/ARRET DU PROJECTEUR
REGLAGE DE LA MISE AU POINT
REGLAGE DU VOLUME
CONNECTER AUX RESEAUX SANS FIL
DIFFUSER ECRAN _ ANDROID _ WINDOWS _ MIRACAST®
INFORMATIONS DE CONTACT DU SERVICE A LA CLIENTELE
5
5-7
8
8
8
9
9-10
10
11 - 12
12
13
13-15
16
16
16 - 17
17
18-19
19 -20
20

INTRODUCTION
Thank you for purchasing the KODAK LUMA 350 Portable Projector. Th is User
Guide is intended to provi de you with guidelines to ensure that operation of
this product is safe and does not pose risk to the user. Any use that does not
conform to the guidelines described in this User Guide may void the limited
warranty.
This product is covered by a limited one-year warranty.Coverage is subject to
limits and exclusions. See warranty for details.
Please make sure to view and download the full user guideat
www.kodakphotoplus.com
PRODUCT OVERVIEW
1. Lens 1. Power
2. Air Outlet 2. Speaker
3. Up 3. Air Inlet
4. Confirm/ Return 4. Tripod Dock
(press morethan 2 seconds) 5. Rating Label
5. Right/ Fast Forward 6. Non-slip Mat
6. Left / Rewind
7. Focus Wheel
7. Down
8. Speaker
8. Power Indicator
5I EN

9. Audio Output (3.5mm)
10. USB Input/ Power Out
11. HDMI I nput
12 . DC Input (15V/1.5A)
mHI
C
- 1 1 -
•
< >
V
•
[ 0
&a
r-1
~ ·1
.....,.,
--
-
EN l6
Cl)
===
===
===
I
-! -
•
e
=
=
= •e
=
=
e =
=
=
=
e
0
0 0
0 0
C)
00000000 00000000
I =
=
=
l l
0

Power off --
Confirm
Cursor On/Off
Return
2x AAA Battery
(Not included)
/
@·@
6
<J O I>
"
Indicator
-- Home
-- Direction Key
Menu
Within two (2) minutes of turning on the projector, press and hold both the Vol+
and Vol -keys for approximately three seconds. The remote's indicator light will
flash quicklyand then stop, indicating that the remote has successfully paired
with the projector.
71 EN

CHARGING THE PROJECTOR
Before using the projector, connect it to the charger and allow it to fully charge.
Always use the original chargerthat was provided to ensure proper charging.
Ifthe red indicator LED light is flashing, th is means that the battery is low.
Wh ile the projector is charging, the indicator LED will be a solid red light. Once
charging completes, the indicator LED will change to a solid white light.
POWERINGTHE PROJECTOR ON/OFF
To turn the projector on or off, hold the power button on the side for three (3)
seconds. Once powered on, tapthe power button lightly to display the remain-
ing battery percentage on the screen.
ADJUSTING THE FOCUS
If the image on the screen appears fuzzy or unfocused when you turn the pro-
jector on, use the focus wheel on the side to correct the image. Turn the wheel
up or down unt il the image appears sharp and clear.
NOTE: Ifa specific image or video remains fuzzy after adjusting the focus
wheel,try pressing and holding the confirm button to return to the main menu.
Ifthe main menu graphics appear clear and the image is still fuzzy, the problem
may be the image or video quality.
EN l8

ADJUSTING VOLUME
To adjust the device volume during playback, use the ◄ +and ◄ - buttons on
the remote control.
To adjust the vo l ume without using the remote cont rol, from the main menu,
select Settings > Sounds.
CONNECTING TO AN EXTERNAL DEVICE
To access photo s or videos stored on any USB drive, simply insert the
drive into the corresponding port on the side. If you're using an HDMI compati-
ble dev ice, connect an HDMI cable from the device to your projector to access
and view images and pictures.An HDMl-to-HDMI cable is included. Ifyour
device requires an adapter, you will need to purchase it separately. For audio
devices or headphones, there is an AUDIO OUT jack on the leftside.
NOTE: Ifyou connec t an HDMIdevice as well as a USB drive, the HDMI device
will ta ke precedenceover the USB drive and you will need to disconnect it to
access the other connected sources.
9I EN

[ Ill+>
00
~
(=)
1.1111
--
,.
~
~~
(
::ir hnn
~IJP::i er
CONNECTING TO A WIRELESS NETWORK
Connecting to the wireless networkwill allowyou to browse the web using
your projector's built-in Android web browser, as well as download apps from
the app store. This is a necessary step to allow you to take advantage of the
Android operating system.
EN I10
1. From the main menu, select Settings > WLAN.
2. Select the correct networkfrom the list and use the
arrows on top of the projector or the remote to navigate the
keyboard and enterthe password.
3. The projector should connect to that networkwhenever
it is in range.

SCREEN MIRRORING (ANDROID/WINDOWS-MIRACAST®)
1. From the projector main menu, select "Screen Mirroring," and then select
"Miracast®". The name of the projector will be displayed on the screen so that
you can accurately identifyit when attempting to connect.
2. Make sure your device is connected to the same network as your projector.
3. Activate the screen mirroring software on your device.
a. To activate screen mirroring on your Android™ device:
i. On Samsung devices, swipe down from the top
notification bar to the expanded view, and then swipe
left (if necessary) and touch the "SmartView" icon to
activate screen sharing. NOTE: Check your device
settings for the screen casting/screen mirroring
options. The name of the function may vary by device
model and service carrier.Other names used may
include, "Cast," or "Screen Mirroring," as well as "Smart
View". All devices must be running at least Android
version 4. 1.2.
b. To activate screen mirroring on your Windows®10 device:
i. From the start menu, select Settings.
ii. In the Settings menu, select Devices.
iii. On the left side of the Devices menu, select
Connected Devices, and then click Add a Device.
11 I EN

4. Select the projectorfrom the list of devices and sel ect "Connect."
Adialog box will pop up on the projector screen for you to confirm the
connection; use the arrows or the remote to highlight "Accept" and press the
confirm button.
5. Your screen will now be mirrored to the projector.
6. When finished, select Disconnect on your device.
CUSTOMERSERVICE CONTACT INFORMATION
Should you experience any problemswith your product, please contact us
before returning the item to the place of purchase. We ' re here to help!
U.S. Support: kodak@camarketing. com
844 - 516 -1539
International Support: kodakintl@camarketing. com
844-516-1540
EN I 12