Delta Electronics Through Hole Power Inductors THAR0806 Installation instructions

Through Hole Power Inductors
THAR0806 Type
Mechanical Dimension:
RoHS compliant.
High current ( lsat up to 40A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Ideal for power source circuits, DC-DC converter,
DC-AC inverters inductor application.
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Features
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
150
B
A
G
G
2x H
E
D C
F
Electrical Characteristics : At 25 : 100KHz, 1V
oC
1. Lo is the initial inductance and the tolerance is 20%.
2. Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current.
O
3. Irms is the DC current which cause the surface temperature of the part increase approximately 45 C.
OO
4. Operating temperature : -40 C to 125 C ( including self-temperature rise ).
RECOMMENDED PAD PATTERNS
UNIT : mm/inch
A = 8.20 / 0.323 Max.
B = 8.20 / 0.323 Max.
C = 3.50 0.5 / 0.138 0.020
D = 6.00 / 0.236 Max.
PART NO. Isat
(Adc)
Irms
(Adc)
F 0.1
(mm/inch)
G 0.5
(mm/inch)
H Max.
(Mm/inch)
DCR
(m ) 8%
(uH)
1
L
23
E 0.5
(mm/inch)
THAR0806-R47 0.47 2.6 34 19 6.3 / 0.248 0.8 / 0.031 4.5 / 0.177 1.2 / 0.047
THAR0806-0R6 0.60 2.6 30 19 6.3 / 0.248 0.8 / 0.031 4.5 / 0.177 1.2 / 0.047
THAR0806-0R8 0.80 3.0 27 18 6.3 / 0.248 0.8 / 0.031 4.5 / 0.177 1.2 / 0.047
THAR0806-1R0 1.00 4.7 22 15 6.3 / 0.248 0.7 / 0.028 4.5 / 0.177 1.1 / 0.043
THAR0806-1R2 1.20 4.7 21 15 6.3 / 0.248 0.7 / 0.028 4.5 / 0.177 1.1 / 0.043
THAR0806-1R5 1.50 6.0 15 12 6.8 / 0.268 0.6 / 0.024 5.0 / 0.197 1.0 / 0.039
THAR0806-1R8 1.80 10.4 14 10 6.8 / 0.268 0.5 / 0.020 5.0 / 0.197 0.9 / 0.035
THAR0806-2R0 2.00 10.4 12 9 6.8 / 0.268 0.5 / 0.020 5.0 / 0.197 0.9 / 0.035
THAR0806-2R5 2.50 11.5 10 8 6.8 / 0.268 0.5 / 0.020 5.0 / 0.197 0.9 / 0.035
0
0.2
0.4
0.6
0.8
1
1.2
010 20 30 40
INDUCTANCE (uH)
DC BIAS (A)