Delta Electronics DIAVH-IPC003100 User manual

Embedded industrial
computer
User manual
The model you choose：
□DIAVH-IPC003100
□DIAVH-IPC005100
□DIAVH-IPC003101
□DIAVH-IPC005101
□DIAVH-IPC003102
□DIAVH-IPC005102
□DIAVH-IPC003103
□DIAVH-IPC005103
□DIAVH-IPC003104
□DIAVH-IPC005104
□DIAVH-IPC003105
□DIAVH-IPC005105
version：Ver.A02

Disclaimer
This manual is only for Delta Electronics, Inc, no copyright without
permission .the contents of this manual are not representative of the
manufacture’s commitment ,due to the continuous improvement of products,
we reserve the right to change the manual, please forgive that if no information
in advance.
In no event will the manufacture be liable for direct. indirect.
Special .incidental or consequential damages. arising out of improper
installation or use. Or inability to use the product or documentation.
Guarantee Clause:
The warranty on the product lasts for 18 months, if the user has additional
requirements ,the contract sighed between the two sides shall prevail.
Trademarks
All the trademarks mentioned in this manual are registered trademarks of their
respective companies.
AMI®is the registered trademark of AMI Company.
Intel®, Celeron®, Pentium®,Atom are the registered trademarks of Intel.
NetWare®is the registered trademark of Novell Inc.
PS/2 and OS/2 are the registered trademarks of International Business
Machines
Windows 7, windows XP, Windows 8 are the registered trademarks of
Microsoft

Safety Instructions
•Please read the user manual carefully before using the product, and
carefully keep it for future reference.
•Before connecting power supply to the product, please confirm the voltage
is compliant with the requirement of the device.
•To avoid electric shock or damage to the product, please unplug the power
cord from the socket before cleaning the device by wet rag.
•Please do not use liquid or aerosol cleaner to clean up the device.
•To avoid short circuit or fire, please do not let any liquid get into or splash
into the product.
•For a device which needs to use power cord, there must be an
easy-to-reach power socket around the device.
•Please do not use the product in a damp environment.
•Before installation, please make sure the device is placed on a solid
surface; accidental drop or tipping may cause malfunction or damage to
the device.
•Before you connect or unplug any signal cable, make sure all power cords
are unplugged in advance;
•To avoid unnecessary damage caused by frequent power-on/off, wait at
least 30 seconds after turning off the computer before re-turning on the
computer.
•If the product will not be used for a long time, please disconnect the power
cord, to avoid damage to the product by transient voltage.
•If the product needs to be upgraded, installed or dismantled, please
implement all the operation on an ESD workstation, for some precision
devices are sensitive to ESD;
•Ensure excellent heat dissipation and ventilation of the system.
Please do not open or dismantle the device by yourself. For the sake of
safety, this device can only be opened by a professional maintenance
person.

Packing List
•A fanless industrial Computer
•1*AC 100V～240V to DC+12V/5A power adapter
•1*AC220V power cable
•2*Mounting Bracket & 6*Screw
•1*Driver CD & manual
•1*Certification,1*packing list

Content
1．Product Introduction.........................................................................1
1.1 Brief introduction ........................................................................................1
1.2 Product specifications................................................................................1
1.3 I/O.................................................................................................................3
2．Application planning.........................................................................4
2.1 Transportation.............................................................................................4
2.2 Storage Requirements...............................................................................4
2.3 Unpack and check the delivered equipment ..........................................4
3．Installation instructions ....................................................................6
3.1 Product outline............................................................................................6
3.2 Product assembly.......................................................................................6
3.3 Product Dimension.....................................................................................7
4．Interface Definition ...........................................................................8
4.1 USB port......................................................................................................8
4.2 Ethernet.......................................................................................................9
4.3 Standard DB9..............................................................................................9
4.4 Standard VGA.............................................................................................9
4.5 Standard HDMI A Type ............................................................................10
4.6 Power.........................................................................................................10
5. Appendix............................................................................................ 11
5.1 Host BIOS settings...................................................................................11
5.1.1 Main...............................................................................................11
5.1.2 CSTIPC.........................................................................................11
5.1.3 Advanced......................................................................................13
5.1.4 Chipset..........................................................................................14
5.1.5 Boot ...............................................................................................14
5.1.6 Security.........................................................................................15
5.1.7 Save & Exit...................................................................................16
5.2 Driver software installation......................................................................17
5.2.1 Chipset driver installation............................................................17

5.2.2 On board graphics card driver installation................................17
5.2.3 On board sound card driver installation....................................17
5.2.4 On board network card driver installation.................................17
5.3 Trouble & Trouble shooting.....................................................................18

- 1-
1．Product Introduction
1.1 Brief introduction
DIAVH-IPC00X10X is a low-power-consumption, high-performance and
fanless embedded industrial computer, with material of high-strength and
elegant al-alloy and the high-density al-alloy radiator.
This product has low power consumption Intel Core I3-4030U / I5-4200U
on board, 4GB DDR3L RAM，max to 8GB (optional), and it has rich I/O
interfaces and fully-sealed fanless design, supporting Windows 7/ 8.1/10 Linux
and so on.
This product can be used in the field of mechanical equipment，intelligent
transportation, industrial automation control and other different embedded
solutions.
1.2 Product specifications
Item
Definition
Main
function
processor
DIAVH-IPC003100/01/02/03/04/05: Intel® Core
I3-4030U
DIAVH-IPC005100/01/02/03/04/05: Intel® Core
I5-4200U
memory
4GB DDR3L RAM
display
Integrated Intel® HD 4400，200-1000MHz
storage
SSD 512GB
ethernet
2*RTL8111E GbE
audio
1*Line out
expansion
Mini-PCIE bus expansion, support Wifi ,Bluetooth
I/O
6*serial port COM1(RS232), COM2(RS232),
COM3(RS232), COM4(RS232),
COM5(RS232), COM6(RS422/RS485)
2*USB2.0, 4*USB3.0
2* Intel I211
1*VGA
1*HDMI
1*Line out

- 2-
Item
Definition
perform
ance
Dimension
DIAVH-IPC003100/01/02/03/04/05:
212.4mm（L）×210mm（W）×71.6 mm（H）；
DIAVH-IPC005100/01/02/03/04/05:
212.4mm（L）×210mm（W）×71.6 mm（H）；
structure
Material: high-strength Al-alloy heat
dissipating plate
color：black
Heat dissipation：fanless design
weight
DIAVH-IPC003100/01/02/03/04/05 ：NW ：
2.75Kg；GW：3.5Kg
DIAVH-IPC005100/01/02/03/04/05 ：NW ：
2.75Kg；GW：3.5Kg
Temp
Operationg temp:-10°C ～50°C
Storage temp:-20°C ～60°C
Humidity
90% @ 40°C（non-condensing）
EMC
Limit of radio disturbance meets
GB9254-1998 standard Class A
Immunity meets the limits of GB/T
17618-1998 standard
Reliability
MTBF≥5000h
MTTR≤0.5h
safety
Meets basic requirements of GB4943
Mechanic
environment
compatibility
Anti-vibration: 5-19Hz/1.0mm amplitude;
19-200Hz/1.0g, acceleration
Anti-shock: 10g acceleration, 11ms duration
Power
100~240VAC/50~60Hz（with adapter）；
9~24VDC or 9~36VDC optional（no
adapter）；
Power consumption：16 W（standby）；
Power consumption：20.4 W(running
MaxPower 100%）；

- 3-
1.3 I/O
DIAVH-IPC003100/01/02/03/04/05（DIAVH-IPC005100/01/02/03/04/05）:
Picture 1-1

- 4-
2．Application planning
2.1 Transportation
Well-packaged products are suited for transportation by truck, ship, and
plane. During transportation, products should not be put in open cabin or
carriage. During transshipping, products should not be stored in open air
without protection from the atmospheric conditions. Products should not be
transported together with inflammable, explosive and corrosive substances
and are not allowed to be exposed to rain, snow and liquid substances and
mechanical force.
2.2 Storage Requirements
Products should be stored in package box when it is not used. And
warehouse temperature should be -20℃～70℃, and relative humidity should
be 20% ~ 85%. In the warehouse, there should be no harmful gas,
inflammable, explosive products, and corrosive chemical products, and strong
mechanical vibration, shock and strong magnetic field interference. The
package box should be at least 10cm above ground, and 50cm away from wall,
thermal source, window and air inlet
Caution!！！
Risk of destroying the device!
When shipping the PC in cold weather, please pay attention to the
extreme temperature variation. Under this circumstance, please make
sure no water drop (condensation) is formed on the surface or interior of
the device. If condensation is formed on the device, please wait for over
twelve hours before connecting the device.
2.3 Unpack and check the delivered equipment
Unpack the equipment
Pay attention to the following things when you unpack the equipment.
● Please take the advice not to throw away the original packaging material and
please retain to use it when the equipment should be transported again.
● Please put the document in a safe place. It will be used in the initial
adjustment of equipment and it is a part of the equipment.