Delta Electronics SMT Power Inductor SILM315L User manual

SMT Power Inductor
SILM315L Type
25 : 100KHz, 0.1V
oC
45
Features
RoHS compliant.
Low profile (1.5mm max. height) SMD type.
Magnetically shielded, suitable for high density mounting.
Self-leads, suitable for high density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Idel for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
Electrical Characteristics:
1. Tolerance of inductance: 30% for 2.2~8.2uH; 20% for 10~22uH.
2. Isat is the DC current which cause the inductance drop 35% typical of its nominal inductance without current.
3. Ir is the DC current which cause the surface temperature of the part increase less than
4.Operating temperature : -20 to 105 (including self-temperature rise).
o
45 C.
oo
C C
(uH)
1
L
PART NO. m
DCR
( ) MAX (Adc)
Isat
2
(Adc)
Ir
3
SILM315L - 2R2 2.2 108 0.90 1.00
SILM315L - 3R3 3.3 168 0.70 0.90
SILM315L - 4R7 4.7 240 0.60 0.85
SILM315L - 5R6 5.6 264 0.55 0.80
SILM315L - 6R8 6.8 288 0.52 0.77
SILM315L - 8R2 8.2 420 0.48 0.72
SILM315L - 100 10.0 480 0.45 0.70
SILM315L - 120 12.0 540 0.40 0.65
SILM315L - 150 15.0 720 0.35 0.50
SILM315L - 180 18.0 816 0.30 0.40
SILM315L - 220 22.0 960 0.25 0.30
Mechanical Dimension:
UNIT:mm/inch
A =3.2 / 0.126Max.
B = 3.2/ 0.126 Max.
C = 1.5/ 0.059 Max.
D = 4.0/ 0.157 Max.
E = 2.2/ 0.087
F = 1.0/ 0.039
1.5
1.7
4.7
B
D
A
F
C
E
RECOMMENDED PAD PATTERNS
Mechanical Dimension:
UNIT:mm/inch
A =3.2 / 0.126Max.
B = 3.2/ 0.126 Max.
C = 1.5/ 0.059 Max.
D = 4.0/ 0.157 Max.
E = 2.2/ 0.087
F = 1.0/ 0.039
1.5
1.7
4.7
B
D
A
F
C
E
RECOMMENDED PAD PATTERNS
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com