Delton 30x User manual
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
USER MANUAL
Thank you for purchasing the
Delton 30X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep
it for future reference. This manual explains the features and functions
of this product.
SPECIFICATIONS
WHAT’S IN THE BOX?
PRODUCT DESCRIPTION
CHARGING
LEGAL WARRANTY
Wireless Headset
USB Dongle
Type-C Charging Cable
User Manual
The period of guarantee and any other conditions relating to it, is governed
by the legislation of the country where the product was purchased
LED INDICATOR
Power ON
Power OFF
Mode Indicator
Blue LED flash 2 times
Red LED flash 2 times
Blue and Red LED flashing alternately
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Blue LED flash every 10 seconds
Red LED flash
Red LED is steady on
Red LED will turn off
Red LED flashes 1 time every 6 seconds
Pairing Mode
Connected Standby Mode
Blue and RED LED flash 1 time Clear Record
Playing Music
Dialing/Talking
Low Battery
Charging
Full Charged
Mic Mute
WARRANTY
Delton warrants this product against defects in material and/or workmanship
under normal use. To view our warranty policy or to submit a claim, please
visit overtimebrands.com/pages/warranty-information.
Register your product at
overtimebrands.com
YEAR
WARRANTY
1
Speaker Sensitivity: 119±5dB
Wireless: V5.0
Operation Range: 30 Ft
Battery: 250mAh
Charging Interface: Type-C
Driver: ---
Noise Canceling: DSP ENC
Talk Time: Up to 26 Hours
Charging Time: Up to 2 Hours
Stand-by Time: Up to 200 Hours
WIRELESS HEADSET
GENERAL FUNCTIONS
Set up: Plug the included USB Dongle into
PC/laptop. Connect your headset.
NOTE: LED indicator is on the USB dongle.
Power & Pairing Mode
MFB Function
Instructions for the dock
CALL FUNCTIONS
Power Saving Functions
Automatically shuts down when there is no
connection for more than 10 minutes.
Automatic Shutdown:
Answer Call:
End Call:
Reject Call:
Mic On (Unmute):
Mute Mic:
Short press “MFB” to answer an incoming call
Short press “MFB” to hang up the call
Long press “MFB” for 1 second to reject incoming calls
Short press the Microphone Mute Button
Short press the Microphone Mute Button
Double click “MFB” to redial the last dialed phone
number (when phone is in standby or playback mode).
Redial Last Number:
Double click “MFB” to hold the current call and
connect to the new call. Double click “MFB” again to
switch between the reserved call and the
current call (short pressing will end the call)
Three-Party Call:
PAIRING TO TWO DEVICES
* Music can only be played from one device under two connections,
when you want to play music from another device, you need to pause
or close the music of the previous device.
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn
off BT function of first phone or PC. The headset will enter pairing
mode automatically and LED will alternate flashing blue and red.
Turn on the BT function of second phone or PC to search and
connect to DELTON30X. The LED will slow flash blue when the
headset is connected.
Turn on BT function of first phone or PC, click to reconnect
“DELTON30X”on BT lists. Headset is connected with two devices
now.
A.
B.
C.
While headset is off, press and hold “MFB” for 4-6 seconds to enter
pairing mode. The LED will alternate flashing blue and red.
In your phone's or your PC's BT pairing screen, click DELTON30X to
connect to the headset.The LED will slow flash blue when the headset
is connected.
A.
B.
PAIRING TO ONE DEVICE
Microphone
Soft Head Cushion
Extendable
Soft Ear Cushion
(MFB) Multi-Functional Button
(Power, Answer, End Call, Redial, Play, Pause)
Volume+ /
Next Track
Volume- /
Previous Track
Microphone
Mute Button
Flexible
Type-C
Charge Port
RED OFF
RED/BLUE
BLUE
Tips: Please mind that it only can
be used when connect with
mobile phone.
Microphone Mute
Output: DC 5V
Table of contents
Other Delton Headset manuals
