Demco Kite User manual

To ensure proper assembly
of your Kite®folding table,
please take time to read
through the steps in this
assembly guide and follow
them carefully. We have
already attached the table
frame to the table top for
you.
Kite Assembly Guide

1
Remove the table from the box.
For ease of assembly and to avoid
injury, ensure the table is lifted by
two people.
Kite User Manual Assembly Guide

2
Place the table face down on a soft, clean
surface to eliminate the possibility of scratching.
Note: Once the first table has been assembled,
it can be used as a bench to assemble further tables.
We recommend using the rectangle shape as a bench,
with the box lid placed on top to avoid scratching.
Kite User Manual Assembly Guide

3
Remove a leg from the box. Insert the leg
bolts through the two holes as shown, until
the thread is showing on the other side.
Kite User Manual Assembly Guide

4
Screw the leg bolts to the Kite frame by hand.
Tighten with the allen key provided. Repeat steps 3 and 4
until all the legs are securely fastened to the frame.
Note: Extra care should be taken to
avoid double crossing the bolt thread.
Kite User Manual Assembly Guide

5
Check frame to ensure the
locking mechanism is in the
locked position.
6
Two people should then flip
over the completed table and
place on the floor.
Kite User Manual Assembly Guide