Demco TechnoLink Media Table User manual

TechnoLink Media Table
Installation Instructions
10-26-18

2
Assembled TLK Media Table Removable back panel
Steel Leg
Work Surface
Removable cable
management
access panel
Surface Mounted Power
Vertical Panel
Grommet

3
Step 1 -Place work surface face down and
attach steel leg with 4 bolts provided
Step 2 –Remove back panel of
vertical panel via 8 x bolts

4
Step 3 –Slide work surface keels
into two slots in upright panel
Step 4 –With the back panel removed,
connect the work surface keels to the
upright panel through 4 bolts provided.
Keel
Slots

5
Step 5 –Bolt through back panel and into
work surface at two additional points.
Rear View of Vertical Panel with back panel removed.

6
Step 6 –Remove cable management
access panel. Place power module into
precut slot in work surface.
DropShare unit
TV Bracket
Cable Management Access Panel
Power Unit
Step 7 –Attach 2 brackets to DropShare unit, then
attach DropShare to underside of work surface in
location shown. Attach TV bracket in location shown .
Power Unit

7
Step 8 –Connect DropShare unit, flat panel monitor and surface power unit. Once technology is connected and
working correctly reinstall the removeable back panel and cable access panel to conceal / manage cables.
Find Technolink media table @demco.com
Search: Technolink media table
Call 800.962.4463 or email [email protected]