Option Setup
Make various other settings.
F Menu tree F
Manual Setup
Option Setup
a Amp Assign
s Volume Control
d Source Delete
f GUI
g Quick Select Name
h Trigger Out 1
j Trigger Out 2
k Remote ID
l 2Way Remote
A0 Dimmer
A1 Setup Lock
A2 Maintenance Mode
A3 Firmware Update
A4 Add New Feature
Display Description
Updating failed Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure connecting to server.
bIf the display reads as shown below, check the settings and network
environment, then update again.
A3
Firmware Update
Update the firmware of the receiver.
Check for Update
You can check for firmware updates. You can also check approximately
how long it will take to complete an update.
Start
Execute the update process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down. The amount of update time which has elapsed
is displayed.
When updating is complete the power indicator becomes green and
normal status is resumed.
bIf the upgrade is not successful, an error message identical to those
in “Firmware Update” will appear on the display, check the settings
and network environment, then update again.
A4
Add New Feature
Display the new functions (payment required) which can be
purchased for downloading to the AVR-3808CI and upgrade.
Upgrade
Execute the upgrade process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down. The amount of update time which has elapsed
is displayed.
When updating is complete the power indicator becomes green and
normal status is resumed.
When you purchase a new function and register your user information,
“Registered” is displayed on this menu and you can proceed with the
upgrade.
Notes concerning use of “Firmware Update”
and “Add New Feature”
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection.
• Do not turn off the power until updating or upgrating is
completed.
• Even with a broadband connection to the Internet, approximately
1 hour is required for the updating/upgrading procedure to be
completed.
Once updating/upgrade starts, normal operations on the
AVR-3808CI cannot be performed until updating/upgrading is
completed.
Furthermore, updating/upgrading the firmware may reset the
backup data for the parameters, etc., set for the AVR-3808CI.
AV SURROUND RECEIVER
AVR-3808CI Addendum Sheet
Thank you for purchasing DENON’s product. When you operate the unit, please read the owner’s manual and this sheet.
vpage 33 : Correction vpage 36 : Additional Information
vpage 36 : Correction
Information regarding the “Firmware Update” function and “Add New
Feature” will be announced on the DENON web site each time related
plans are defined.
Printed in Japan 5431 10015 000D
