Denon AVR-990 User manual

AV SURROUND RECEIVER
AVR-990
Owner’s Manual
Manuel de l’Utilisateur
GraphicalUserInterface
English
Use this manual in combination with the
operating guide displayed on the GUI screen.
GUI Menu Operation (vpage 25)
GUI Menu Map (vpage 24)
Remote Control Unit Operations (vpage 84)
Français
Utilisez ce manuel en même temps que le guide
d’utilisation affiché sur l’écran GUI (Interface
graphique).
Fonctionnement du menu de l’interface graphique
GUI (vpage 25)
Plan du menu de l’interface graphique GUI (vpage 24)
Fonctionnement des appareils connectés avec la
télécommande (vpage 84)

ENGLISH
I
nSAFETY PRECAUTIONS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPOTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION:
• The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
• No naked flame sources, such as lighted candles, should be
placed on the unit.
• Observe and follow local regulations regarding battery disposal.
• Do not expose the unit to dripping or splashing fluids.
• Do not place objects filled with liquids, such as vases, on the
unit.
ATTENTION:
• La ventilation ne doit pas être gênée en recouvrant les ouvertures
de la ventilation avec des objets tels que journaux, rideaux, tissus,
etc.
• Aucune flamme nue, par exemple une bougie, ne doit être placée
sur l’appareil.
• Veillez à respecter les lois en vigueur lorsque vous jetez les piles
usagées.
• L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
• Ne pas poser d’objet contenant du liquide, par exemple un vase,
sur l’appareil.
CAUTION:
To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to
the unit and must be within easy access by the user.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur,
débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y accéder
facilement.
CAUTION:
HOT SURFACE. DO NOT TOUCH.
The top surface over the internal heat sink may become
hot when operating this product continuously.
PRECAUTION:
SURFACE CHAUDE. NE PAS TOUCHER.
La surface supérieure du dissipateur de chaleur peut
devenir chaude si vous utilisez ce produit en continu.
FRANCAIS

II
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed in a rack.
• Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une
étagère.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Keep the unit free from moisture, water,
and dust.
• Protéger l’appareil contre l’humidité, l’eau
et la poussière.
• Unplug the power cord when not using the
unit for long periods of time.
• Débrancher le cordon d’alimentation
lorsque l’appareil n’est pas utilisé pendant
de longues périodes.
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d’aération.
• Do not let foreign objects into the unit.
• Ne pas laisser des objets étrangers dans
l’appareil.
• Do not let insecticides, benzene, and
thinner come in contact with the unit.
• Ne pas mettre en contact des insecticides,
du benzène et un diluant avec l’appareil.
• Never disassemble or modify the unit in
any way.
• Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
nNOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION
FCC INFORMATION (For US customers)
1. COMPLIANCE INFORMATION
Product Name: AV Surround Receiver
Model Number: AVR-990
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
product may not cause harmful interference, and (2) this product must accept any interference received, including
interference that may cause undesired operation.
Denon Electronics (USA), LLC
(a D & M Holdings Company)
100 Corporate Drive
Mahwah, NJ 07430-2041
Tel. [phone]
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.
3. IMPORTANT
When connecting this product to network hub or router, use only shielded STP or FTP LAN cables which is available
at retailer.
Follow all installation instructions. Failure to follow instructions could void your authority, granted by the FCC, to use
the product.
4. NOTE
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for
help.
For Canadian customers
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
ENGLISHFRANCAIS


ENGLISH
Contentsn
Getting Started·······································································2
Flow of Operations Through Playback········································2
Cautions on Handling ···································································2
Cautions on Installation ·······························································2
Preparations ··················································································3
Accessories ··················································································3
Insert Batteries in the Remote Control Unit ·································3
Operating Range of the Remote Control Unit ······························3
Part Names and Functions ···························································4
Front Panel····················································································4
Display ··························································································5
Rear Panel·····················································································6
Remote Control Unit·····································································7
Connections ·············································································8
Important Information··································································8
Cables Used for Connections ·······················································8
Converting Input Video Signals for Output
(Video Conversion Function)·························································9
Installing / Setting the Speakers···············································10
Speaker Connections··································································12
Connecting Devices ····································································13
Connecting the Power Cord·······················································23
Once Connections are Completed·············································23
Turning the Power On ································································23
Turning the Power Off································································23
Settings····················································································24
GUI Menu Map ············································································24
GUI Menu Operation···································································25
Example of the Display of the GUI Mark at a Title······················25
Examples of GUI Menu Screen Displays····································25
Selecting the Input Source ·························································26
Make the Optimal Speaker Settings, and Correct the Room
Acoustics (Audyssey™ Auto Setup)··········································27
Making Detailed Settings (Manual Setup)································32
Making the Input Settings (Input Setup)··································44
Playback···················································································51
Important Information································································51
Playing Components···································································51
Playing a Blu-ray Disc Player/DVD Player····································51
iPod®Playback···········································································51
Tuning in Radio Stations····························································53
Listening to SIRIUS Satellite Radio·············································54
Listening to HD Radio Stations···················································55
Playing Network Audio, USB Memory Devices ·······················56
Listening to Internet Radio ·························································58
Playing Files Stored on a Computer············································60
Playing Files Stored on USB Memory Devices···························60
Listening to Napster ···································································61
Listening to Rhapsody ································································63
Operations During Playback ······················································65
Adjusting the Master Volume·····················································65
Turning Off the Sound Temporarily (Muting)······························65
Listening with Headphones························································65
Switching the front speakers······················································65
To Stop ·······················································································65
Stopping Playback Temporarily···················································65
Fast-forwarding or Fast-reversing···············································65
To Cue to the Beginning of a Track ············································66
Selecting Tracks··········································································66
Searching Pages ·········································································66
Searching by First Letter·····························································66
Selecting the Surround Mode····················································67
Adjusting the Sound and Picture Quality
(Audio/Video Adjust)··································································69
Adjusting the Sound (Audio Adjust)············································69
Adjusting the Picture Quality (Picture Adjust)·····························73
Checking the Status (Information) ·····························74
Other Operations and Convenient Functions········75
Other Operations ········································································75
Recording on an External Device (REC OUT mode) ···················75
Convenient Functions·································································76
HDMI Control Function·······························································76
Setting the Power to Standby After a Certain Amount of Time
(Sleep Timer Function)································································77
Adjust the Volume of the Speakers············································77
Saving Frequently Used Settings (Quick Select Function)··········78
Playing the Same Network Audio on Different Devices
Connected in a Network (Party Mode Function)·························78
Operating a Wireless LAN-Compatible Mobile Terminal to Play
Music and Videos ·······································································79
Operating the AVR-990 with a Browser
(Web Control Function)·······························································80
Various Memory Functions·························································81
Playing in ZONE2 (ZONE2 Function)··························82
Audio Output···············································································82
qZONE2 Playback by Speaker Output······································82
wZONE2 Playback by Audio Output (PRE OUT) ·······················82
Video Output ···············································································82
Video Connection········································································82
Playback ·······················································································83
Quick Select Function·································································84


Connections Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
Perform the operations leading to playback on the AVR-990 in the
order shown below.
Audyssey™Auto Setup (vpage 27)
Connections
Installing/Setting the Speakers (vpage 10)
Speaker Connections (vpage 12)
Connecting Devices (vpage 13)
Turning the Power On (vpage 23)
Settings
Manual Setup (vpage 32)
Perform “Manual Setup” as necessary.b
Input Setup (vpage 44)
Playback
Playing Components (vpage 51)
Selecting the Surround Mode (vpage 67)
Adjusting the Sound and Picture Quality
(vpage 69)
Flow of Operations Through
Playback Cautions on Handling
• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When traveling or leaving home for long
periods of time, be sure to unplug the power cord from the power
outlet.
• About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
• Moving the unit
Turn off the power and unplug the power cord from the power
outlet.
Next, disconnect the connection cables to other system units before
moving the unit.
• Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.
Cautions on Installation
Note:
For proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
b
bNote
b b
Getting Started
List of preset codes ··································End of this manual
Wall
Operating the Connected Devices by Remote
Control Unit············································································84
Registering Preset Codes ···························································84
Operating Components ······························································85
Assigning buttons that are Not Used to Operate Other
Devices (Punch Through Function)············································88
Other Information ·······························································89
Troubleshooting···································································96
Restoring All the Settings to as They were at the Time of
Purchase (Resetting the Microprocessor)·································99
Specifications······································································100
Getting Started


Connections Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
In addition to the AVR-990, the included remote control unit (RC-1118)
can also be used to operate the equipment listed below.
q DENON system components
w Non-DENON system components
To operate component products other than DENON, you must set
the preset code (vpage 84 “Registering Preset Codes”).
R6/AA
wLoad the two batteries properly
as indicated by the marks in the
battery compartment.
ePut the rear cover back on.
Insert Batteries in the Remote Control
Unit
Inserting the Batteries
NOTE
Insert the specified batteries in the remote control unit.
Replace the batteries with new ones if the set does not operate
even when the remote control unit is operated close to the unit. (The
supplied batteries are only for verifying operation.)
When inserting the batteries, be sure to do so in the proper direction,
following the “q” and “w” marks in the battery compartment.
To prevent damage or leakage of battery fluid:
Do not use a new battery together with an old one.
Do not use two different types of batteries.
Do not attempt to charge dry batteries.
Do not short-circuit, disassemble, heat or dispose of batteries in
flames.
If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
Remove the batteries from the remote control unit if it will not be in
use for long periods.
Used batteries should be disposed of in accordance with the local
regulations regarding battery disposal.
•
•
•
•
•
•
•
•
•
•
•
30°
30°
Approx. 23 feet / 7 m
(RC-1118)
Operating Range of the Remote Control
Unit
Point the remote control unit at the remote sensor when operating it.
NOTE
The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.
Getting Started
Preparations
t y i
Q0o
qOwner’s manual ...................................................................... 1
wGetting started ........................................................................ 1
eWarranty (for North America model only)................................1
rService station list ................................................................... 1
tPower cord (Cord length: Approx. 5.9 ft / 1.7 m) ....................1
yRemote control unit (RC-1118)................................................1
uR6/AA batteries (for RC-1118) ................................................. 2
iAM loop antenna (for HD Radio broadcasts) ........................... 1
oDipole antenna (for HD Radio broadcasts) ..............................1
Q0 Setup microphone
(DM-A409, Cord length: Approx. 25 ft / 7.6 m) .......................1
Accessories
Check that the following parts are supplied with the product.
Thank you for purchasing this DENON product. To ensure proper
operation, please read this owner’s manual carefully before using the
product.
After reading them, be sure to keep them for future reference.
qLift the clasp and remove the
rear lid.


Connections Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
For buttons not explained here, see the page indicated in parentheses ( ).
Part Names and Functions
t
qwer
Q5 Q6Q4Q3
y
o
Q0
Q1
Q2 ui
W4
Q7 Q8 Q9 W0 W3W2W1
E0
E5 W8W9 E3E4 E1 E2 W7 W6 W5
qPower operation button ···························· (23)
wPower indicator ·········································· (23)
ePower switch·············································· (23)
rDoor
When you are using buttons and/or terminals
behind the door, press the bottom of the door to
open it. When not using buttons and/or terminals
behind the door, close it. Be careful not to catch
your fingers when closing the door.
tQUICK SELECT buttons ····························· (78)
yMASTER VOLUME control knob··············· (65)
uAUDYSSEY
DYNAMIC VOLUME™indicator················ (71)
iHD AUDIO indicator···································· (67)
oMaster volume indicator
Q0 Display
Q1 Remote control sensor ································ (3)
Q2 SOURCE SELECT knob ······························ (26)
Q3 SOURCE button·········································· (26)
Q4 TUNING PRESET button······················ (54, 56)
Q5 ZONE 2 / REC SELECT button············· (75, 83)
Q6 VIDEO SELECT button ······························· (47)
GWith the door openH
W7 DYNAMIC VOLUME™button (DYN VOL) ·· (72)
W8 USB port······················································ (20)
W9 STATUS button ···········································(74)
E0 AUDIO DELAY button ································ (73)
E1 RESTORER button······································ (73)
E2 DIRECT/STEREO button ···························· (68)
E3 PURE DIRECT button ································· (68)
E4 DSP SIMULATION button·························· (68)
E5 STANDARD button····································· (67)
Front Panel
Q7 Headphones jack ········································ (65)
Q8 ZONE2 ON/OFF button······························ (83)
Q9 FRONT SPEAKERS button························· (65)
W0 MENU button·············································· (24)
W1 Cursor buttons (uio p)·························· (25)
W2 ENTER button············································· (25)
W3 RETURN button·········································· (25)
W4 V.AUX INPUT connectors·························· (20)
W5 SETUP MIC jack·········································· (28)
W6 MULTEQ®button······································· (71)
Getting Started


Connections Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
ioQ5
Q8
W0W1 Q0Q1
Q6 Q2Q4 Q3
Q7Q9 u
wq e r t y
qInput signal indicators
wInput signal channel indicators
These light when digital signals are input.
When playing HD Audio sources, the“ ”
indicator lights when an extension channel (a
channel other than the front, center, surround,
surround back or LFE channel) is input. If there
are two or more extension channels, the “ ”
and “ ” indicators light.
eInformation display
The input source name, surround mode, setting
values and other information are displayed
here.
rOutput signal channel indicators
tFront speaker indicators
These light according to the settings of the front
A and B speakers.
yMonitor output indicators
This indicator lights up when an HDMI monitor
is connected.
uQUICK SELECT indicators
iMaster volume indicator
oMUTE indicator
This lights when the mute mode is selected.
Q0 PARTY indicators
These indicators light during party mode.
• ORGANIZER
This lights to indicate that party mode has
started as Organizer.
• ATTENDEE
This lights to indicate that party mode has
started as Attendee.
Q1 AUDYSSEY MULTEQ indicators
Lighting is as follows, depending on the setting
of “Dynamic EQ” (vpage 71) and “Dynamic
Volume” (vpage 72).
• : When“DynamicEQ”and“Dynamic
Volume” are “ON”.
• : When the “Dynamic EQ” setting is
“ON” and the “Dynamic Volume”
setting is “OFF”.
• : When“DynamicEQ”and“Dynamic
Volume” are “OFF”.
Q2 SLEEP indicator
This lights when the sleep mode is selected.
Q3 RESTORER indicator
This lights when the RESTORER mode is
selected.
Q4 ZONE2 indicator
This lights when the power for the ZONE2 is
turned on.
Display
Q5 AL24 indicator
This lights when AL24 Processing Plus (vpage
90) is activated.
Q6 Input mode indicators
Q7 HDMI indicator
This lights when playing using HDMI
connections.
Q8 Tuner reception mode indicators
These light according to the reception conditions
when the input source is set to “HD Radio”.
• STEREO
In the FM mode, these light when receiving
analog stereo broadcasts.
• TUNED
Lights when the broadcast is properly tuned in.
• AUTO
These light when in the auto tuning mode.
Q9 Recording output source indicator
This lights when the REC OUT mode is
selected.
W0 Decoder indicators
These light when the respective decoders are
operating.
W1 HD indicator
This lights during HD Radio reception.
Part Names and Functions
Getting Started


Connections Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
t
eyu i o
Q0
Q2
Q6
Q6 Q0
Q1
qr
w
Q3
Q4Q5
Q7Q8Q7
Part Names and Functions
qSIRIUS connector ······································· (18)
wRS-232C connector····································· (21)
eREMOTE CONTROL jacks ·························· (21)
rTRIGGER OUT jacks ··································· (21)
tDOCK CONTROL jack································· (15)
ySpeaker terminals ······································ (12)
uSIGNAL GND terminal ······························· (16)
iAC inlet························································ (23)
oAC OUTLETS··············································· (23)
Q0 Digital audio connectors····················(15 ~ 18)
Q1 HD Radio antenna terminals ····················· (19)
Q2 ETHERNET connector ································ (22)
Q3 COMPONENT VIDEO connectors···(14, 15, 17)
Q4 HDMI connectors········································ (13)
Q5 VIDEO / S-VIDEO connectors············ (14 ~ 18)
Q6 Analog audio connectors···················(15 ~ 18)
Q7 PRE OUT connectors···························· (21, 82)
Q8 EXT. IN connectors····································· (20)
Rear Panel
Getting Started


Connections Settings Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
Remote Control Unit
Part Names and Functions
Getting Started
w
q
e
t
r
y
u
i
o
Q0
Q2
Q1
Q3
Q4
Q5
Q6
Q7
W0
Q9
r
Q8
W1
W3
E0
W9
W6
W5
W4
W7
W8
NOTE
Buttons on the back panel may operate when the
back lid is pressed.
The HDMI CONTROL buttons cannot be used.
•
•
qIndicator ······················································ (84)
wPower buttons············································ (23)
eQUICK SELECT buttons ····························· (78)
rInput source select button ························ (26)
tSystem buttons······················(65, 66, 85 ~ 88)
yMENU button·············································· (24)
uCursor buttons (uio p)························· (25)
iSEARCH button ·········································· (66)
oSOURCE SELECT button ··························· (26)
Q0 DEVICE SELECT switches·······················(7, 84)
Q1 Remote control signal transmitter ············· (3)
Q2 Master volume control buttons ················ (65)
Q3 Muting button (MUTE) ······························ (65)
Q4 Channel level adjustment button ······· (34, 77)
Q5 RETURN button·········································· (25)
Q6 ENTER button············································· (25)
Q7 ZONE power button··································· (83)
Q8 VIDEO SELECT button ······························· (47)
Q9 Front height speaker on/off button·········· (70)
W0 Tuner operation buttons ··························· (55)
W1 MULTEQ®button······································· (71)
W2 Number buttons (0 ~ 9, +10) ····················· (84)
W3 MAIN ZONE power buttons ······················ (23)
W4 SLEEP TIMER button·································· (77)
W5 INPUT MODE button·································· (48)
W6 RESTORER button······································ (73)
W7 PARTY button············································· (78)
W8 Surround mode buttons ·······················(67, 68)
W9 DYNAMIC VOLUME™button···················· (72)
E0 DYNAMIC EQ™button ······························ (71)
W2
For buttons not explained here, see the page
indicated in parentheses ( ).
Rear
Front
Operations possible by remote
control
Operations on the AVR-990
Operations on five devices other that
the AVR-990
• Preset the remote control codes of the devices
to be operated (vpage 84).
• Switch two device selector switches according
to the devices to be operated.
Position of switches
Operable devices
AVR-990
(MAIN ZONE)
iPod, DTU, SAT TU,
NET/USB
AVR-990 (ZONE2)
TV
Blu-ray disc player
or
DVD Player
Digital video
recorder
or
Video deck
Satellite receiver
or
Cable TV
CD player
NOTE
The ZONE3 mode cannot be used.
ZONE2 operations (vpage 82)
Punch through setting (vpage 88)
n
n
n
n