Dentsply Sirona Schick 33 User manual

Schick USB Module and Sensors
User Guide
Schick 33
Schick Elite
100003870
Sirona Dental, Inc.
30-30 47th Avenue, Suite 500
Long Island City, NY 11101
USA
[phone]
[phone] (fax)
Sirona Dental Systems GmbH
Fabrikstr. 31
D-64625, Bensheim
Germany
PART NUMBER 100003870 REV. 4

Copyright 2018 by Dentsply Sirona, Inc.
All Rights Reserved
February 22, 2018

Printed in the United States of America
This document was originally prepared in English
Sirona. Dental products are covered by one or more US
patents. For a current listing, please type Patent Notice into
the Search box of the Schick by Sirona website or enter the
following page information into your browser’s address bar.
http://www.schickbysirona.com/items.php?itemid=13112

Schick USB Module and Sensors 100003870 Rev. 4
i
Contents
1. SYSTEM OVERVIEW......................................................................................................................1
1.1. PURPOSE.............................................................................................................................................................. 1
1.2. INDICATIONS FOR USE ..................................................................................................................................... 1
1.3. DESCRIPTION OF SCHICK 33 AND SCHICK ELITE SYSTEMS....................................................................... 1
1.4. REPLACEABLE CABLE ....................................................................................................................................... 2
1.5. PC WORKSTATION DESCRIPTION .................................................................................................................. 3
1.6. SOFTWARE AVAILABLE FOR SCHICK SENSORS............................................................................................. 4
1.7. SCHICK SENSOR PRODUCT PLATFORMS........................................................................................................ 4
2. INSTALLATION .............................................................................................................................5
2.1. WHAT YOU WILL NEED TO COMPLETE THIS SECTION............................................................................. 5
2.2. BEFORE YOU INSTALL THE SCHICK 33/ELITE USB DRIVER ................................................................... 5
2.3. UNINSTALLING THE PREVIOUS SCHICK 33/ELITE USB DRIVER ............................................................ 6
2.4. INSTALLING THE SCHICK 33/ELITE USB DRIVER...................................................................................... 7
2.5. CONNECTING THE SCHICK 33/ELITE USB INTERFACE............................................................................ 9
3. LED INDICATORS ....................................................................................................................... 10
3.1. SCHICK 33/ELITE USB INTERFACE............................................................................................................. 10
4. OPERATION ................................................................................................................................. 12
4.1. OPERATING THE SYSTEM............................................................................................................................... 12
4.2. USING YOUR SENSOR ..................................................................................................................................... 13
4.3. AUTODETECT .................................................................................................................................................. 22
5. SCHICK 33......................................................................................................................................25
5.1. SCHICK 33 ......................................................................................................................................................... 25
5.2. HIGH RESOLUTION IMAGE ACQUISITION.................................................................................................. 26
5.3. SHARPEN AND HIGH-RESOLUTION IMAGES.............................................................................................. 28
5.4. DIAGNOSTIC TASKS AND USER PROFILES.................................................................................................. 33
5.5. ENHANCEMENT MODES ................................................................................................................................ 39
5.6. SCHICK 33 IMAGE ENHANCEMENT.............................................................................................................. 40
6. SCHICK ELITE ............................................................................................................................. 43
6.1. SCHICK ELITE................................................................................................................................................... 43
6.2. SCHICK ELITE IMAGE ENHANCEMENT....................................................................................................... 44
7. USING THE UPGRADE UTILITY ..............................................................................................49
7.1. INTRODUCTION ............................................................................................................................................... 49
7.2. USB INTERFACE TEST .................................................................................................................................... 51
7.3. SENSOR PATTERN TEST.................................................................................................................................. 52
7.4. USB INTERFACE FIRMWARE UPGRADES..................................................................................................... 53
7.5. SENSOR MODULE FIRMWARE UPGRADE .................................................................................................... 54
8. CABLE REPLACEMENT .............................................................................................................55
9. PROTECTIVE MEASURES ..........................................................................................................60
9.1. INTRODUCTION ............................................................................................................................................... 60
9.2. CLEANING AND DISINFECTING.................................................................................................................... 60
9.3. RECOMMENDED DISINFECTANT.................................................................................................................. 61
10. MAINTENANCE...........................................................................................................................62
10.1. VISUAL INSPECTION........................................................................................................................................ 62
10.2. DAMAGED SENSOR ......................................................................................................................................... 62

100003870 Rev. 4 Schick USB Module and Sensors
ii
10.3. PERIODIC MAINTENANCE ............................................................................................................................. 62
10.4. QUALITY PROCEDURE .................................................................................................................................... 63
11. ACCESSORIES...............................................................................................................................65
11.1. SCHICK 33/ELITE USB INTERFACE HOLDER............................................................................................ 65
11.2. SCHICK SENSOR HOLSTER ............................................................................................................................. 66
APPENDIX A. REFERENCE ..............................................................................................................68
A-1. REMOVAL AND REPLACEMENT..................................................................................................................... 68
A-2. PART NUMBERS................................................................................................................................................ 68
A-3. SUMMARY OF SPECIFICATIONS...................................................................................................................... 71
A-4. LEAKAGE CURRENT STATEMENT ................................................................................................................ 72
A-5. EMC TABLES.................................................................................................................................................... 73
APPENDIX B. TROUBLESHOOTING TIPS .....................................................................................77
B-1. INTRODUCTION ............................................................................................................................................... 77
B-2. TROUBLESHOOTING FOR SCHICK 33 AND SCHICK ELITE ....................................................................... 77

Schick USB Module and Sensors 100003870 Rev. 4
iii
ListofFigures
Figure 1. Schick 33/Elite USB Interface Cable Connections............................................................................................ 9
Figure 2. Schick 33/Elite USB Interface LED and Connector Views .......................................................................... 25
Figure 3. Sharpen Slider Menu Selections........................................................................................................................... 28
Figure 4. Sharpen Slider (Top Position) .............................................................................................................................. 30
Figure 5. Sharpen Slider (Bottom Position)........................................................................................................................ 30
Figure 6. Sharpen Slider (Overlay Position)........................................................................................................................ 30
Figure 7. User Profile Menu Selections ............................................................................................................................... 35
Figure 8. Diagnostic Tasks: General Dentistry (top) and Endodontic (bottom) ......................................................... 36
Figure 9. Diagnostic Tasks: Periodontic (top) and Restorative (bottom)...................................................................... 37
Figure 10. Diagnostic Task: Hygiene ................................................................................................................................... 38
Figure 11. Enhancement Mode Selections.......................................................................................................................... 39
Figure 12. Selecting Fixed Enhancement in CDR Dicom ............................................................................................... 40
Figure 13. Schick 33/Elite USB Interface LED and Connector Views ........................................................................ 43
Figure 14. Enhancements: Edge Pro (top) and Smooth (bottom) ................................................................................. 46
Figure 15. Enhancements: Edge High (top) and Edge Low (bottom) .......................................................................... 47
Figure 16. Enhancements: None Applied........................................................................................................................... 48
Figure 17. Schick 33/Elite Utility ......................................................................................................................................... 50
Figure 18. Comparing Quality Procedure Images ............................................................................................................. 64
Figure 19. Schick 33/Elite USB Interface and Holder ..................................................................................................... 65
Figure 20. Schick Sensor Holster (Schick 33 Sensor Shown) .......................................................................................... 66
ListofTables
Table 1. Schick 33/Elite USB Interface Cable Connections ............................................................................................. 9
Table 2. Schick 33/Elite USB Interface LED Indications (Normal Conditions)........................................................ 10
Table 3. Schick 33/Elite USB Interface LED Indications (Error Conditions)............................................................ 10
Table 4. Proper Sensor Removal from Sheath (AimRight Autoclavable System) ....................................................... 15
Table 5. Proper Sensor Removal from Sheath (AimRight Adhesive System)...................................................................... 16
Table 6. Sensor Positioning (AimRight Grip System) ............................................................................................................ 17
Table 7. Examples of Sensor-to-Image Orientation ......................................................................................................... 19
Table 8. Diagnostic Task Descriptions and Default Values ............................................................................................ 33
Table 9. Selecting Fixed or Dynamic Enhancement ......................................................................................................... 41
Table 10. Fixed Enhancement in CDR Dicom.................................................................................................................. 42
Table 11. Schick 33 Orderable Item Part Numbers (Latest Version) ............................................................................ 68
Table 12. Schick Elite Orderable Item Part Numbers (Latest Version) ........................................................................ 69
Table 13. Schick 33 Orderable Item Part Numbers (Previous Version) ....................................................................... 69
Table 14. Schick Elite Orderable Item Part Numbers (Previous Version) ................................................................... 70
Table 15. Specifications .......................................................................................................................................................... 71
Table 16. Guidance and Manufacturer's Declaration - Electromagnetic Emissions................................................... 73
Table 17. Guidance and Manufacturer's Declaration - Electromagnetic Immunity.................................................... 74
Table 18. Recommended Separation Distance Between Portable and Mobile RF Communications Equipment
and the USB Interface............................................................................................................................................ 76

100003870 Rev. 4 Schick USB Module and Sensors
iv
Safety Issues
Check SchickSensor,USBInterface,andUSBCablebeforeUsingThem
Before each usage, check the outer surface of the Sensor and cable, the
USB Interface, and the USB cable for any signs of physical damage or
defect. Sensor and USB Interface surfaces should have a smooth
finish, with no evidence of chipping or damage. If detected, contact
your local distributor of Dentsply Sirona products for further
instructions.
OperateSensorandUSBInterfaceasDirected
Always use the Sensor and USB Interface in accordance with the
directions and recommendations contained in this User Guide. Do not
attempt to modify the Sensor and USB Interface or use it in system
configurations not specified in this document.
DoNotTouchExposedConnectorsonNon-MedicalEquipmentandthePatientatthe
SameTime
When the Sensor and USB Interface are in use, avoid touching
exposed connectors on non-medical electrical equipment and the
patient at the same time. The human body is capable of conducting
electrical current and may cause a shock hazard to patients if
appropriate safety practices are not observed.
RFInterferenceConsiderations
Although the Sensor and USB Interface are designed to provide a
reasonable degree of protection from electromagnetic interference,
according to IEC International regulations, they must be installed at an
adequate distance from electricity transformer rooms, static continuity
units, two-way amateur radios and cellular phones. To ensure proper
operation, the latter (meaning, electricity transformer rooms, static
continuity units, two-way amateur radios and cellular phones) can be
used only at a minimum distance of 5 feet (1.5m) from any part of the
Sensor and USB Interface.

Schick USB Module and Sensors 100003870 Rev. 4
v
Any instrumentation or equipment for professional use located near
the Sensor and USB Interface must conform to Electromagnetic
Compatibility regulations, to which the EMC tables in this document’s
Appendix serve as guidance. Non-conforming equipment, with known
poor immunity to electromagnetic fields, may not operate properly
unless they are installed at a distance of at least 10 feet (3m) and
supplied by a dedicated electrical line.
ApplyRecommendedProceduresforCleaning
Safe and proper operation of the equipment requires following a
regular schedule of preventive maintenance. To help ensure proper
hygiene and to protect against infectious disease, refer to the Protective
Measures section on page 60 of this document and observe all device
cleaning and patient protection recommendations specified there.
Although water-resistant, the Sensor should never be soaked or
submerged in disinfecting solution during any cleaning
procedure. Failure to comply with this precaution may cause liquid to
enter the Sensor and can prevent it from operating properly.
DoNotConnectItemsthatareNotPartoftheSystem
Only items specified for use with the Sensor and USB Interface are to
be connected to it. The device should not be used adjacent to other
equipment that is not part of the system. If, however, use with adjacent
equipment is necessary, normal operation should be observed and
verified in that configuration.
InstallerstoEnsurethatSensorandUSBInterfaceOperateOptimally
Installers must ensure that the Sensor and USB Interface provide the
user with the optimal use of the equipment. This includes, but is not
limited to, ensuring that the system operates as described in this
document. To avoid unintentional contact with the USB Interface by
the patient, place the USB Interface in a location where accidental
contact is prevented. Similarly, connect the USB cable to the USB
Interface before the patient enters the operatory.
Installers must also ensure that the system presents no physical
obstacles or hazards during operation and when not in use. To verify
this requirement, installers shall confirm that the Sensor and USB
Interface are installed as described in this User Guide and shall
perform the appropriate procedures therein.

100003870 Rev. 4 Schick USB Module and Sensors
vi
EnsureProperSystemandPCWorkstationInstallationandOperation
The Sensor and USB Interface have been determined to be in
accordance with international safety standards and are deemed suitable
for use within the patient area, which extends from the patient for a
distance of 5 ft (1.5m). To comply with these standards, do not operate
non-medical equipment (such as a PC workstation) inside the patient
area. Outside the patient area, the presence of approved non-medical
grade equipment and Listed / Approved / IEC 60950-1 certified
Information Technology Equipment (ITE) computer equipment is
acceptable.
The host computer (PC workstation) should be CE-approved and
conform with the Low Voltage [73/23/EC] and EMC Directive
[89/336/ERC]. Also, to help ensure optimal performance, ensure that
all software programs residing on the workstation are virus-free
and have been adequately tested so they will not impact imaging
applications after installation.
OnlyDentistsorAuthorizedDesigneesArePermittedtoOperatetheSystem
To ensure the correct use of the Sensor and USB Interface in a clinical
environment, for purposes that correspond to its intended design and
application, only dentists, or their designees, are authorized to operate
the system.
ProtectSensorfromPotentialESDDamage
Like other electronic devices, your Sensor is susceptible to electrostatic
discharge (ESD), particularly when the device is used in or around
carpeted areas or low-humidity environments. During cable
replacement, when Sensor contacts are exposed, it is especially
important to protect the device from potential ESD damage. Touching
a metal surface prior to replacing the cable will reduce the risk of
damaging Sensor components by accidental static discharge. Using
anti-static floor mats or floor treatments (for example Staticide
2005/2002) will also help eliminate static build-up in your office.
WaitforAppropriatePromptsbeforeOperatingX-raySource
To avoid exposing the patient to unnecessary X-rays, ensure that the
CDR exam window viewbox is flashing green (default color) in

Schick USB Module and Sensors 100003870 Rev. 4
vii
AutoTake mode, or that the message, “Waiting to take X-ray,” is
displayed before triggering the X-ray Source.
AlwaysUseSheathswithSensors
Use Dentsply Sirona sheaths every time the Sensor is used. Never use
the Sensor without a protective sheath. Never use a damaged
sheath. Always dispose of the sheath after every patient.
Protective sheaths are single-use items and must not be reused under
any circumstance. Reuse of single-use items/instruments may cause
them to become contaminated, compromise their intended function,
and result in patient and user infection, injury and/or illness.
TakeAppropriatePrecautionsduringX-rayOperation
Always observe the safety guidelines and precautions supplied with
your X-ray generator and by local regulatory authorities.
FollowAllInstructionstoEnsureCableReplacementProceduresarePerformedCorrectly
Follow all instructions to ensure the successful replacement of your
Sensor cables. When performing the cable replacement procedure, it is
especially important to tighten the screws that attach the cable to the
Sensor by turning them at least one-quarter revolution clockwise after initial
resistance or until they cannot be turned any further. An improperly attached
cable may cause an intermittent connection and prevent the Sensor
from operating effectively. Refer to either the Schick 33 or the Schick
Elite sections for complete instructions.
ProductManualsfromDentsplySirona
The contents of this manual are subject to change without prior notice.
For the latest version of this user guide and other product information,
please visit our website: www.dentsplysironasupport.com.

100003870 Rev. 4 Schick USB Module and Sensors
viii
Explanation of Symbols
Dentsply Sirona products display markings to indicate compliance with
regulatory requirements and applicable technical standards.
SymbolsandDescriptions
SYMBOL
DESCRIPTION
Indicates Class II equipment in accordance with applicable medical
device safety standards (IEC/EN/UL 60601-1)
Indicates Type BF equipment in accordance with applicable
medical device safety standards (IEC/EN/UL 60601-1)
Indicates an attention to customers to consult accompanying
documents for information needed for proper use of device
Please refer to the manual first
Manufacturer’s address
Indicates an attention to users to consult accompanying documents
(this User Guide) for more information
Indicates that the USB Interface conforms to European Union
Medical Devices Directive (MDD) 93/42/EEC
Indicates that the Sensor conforms to European Union Medical
Devices Directive (MDD) 93/42/EEC
Indicates that this product meets North American safety standards.
The ETL mark is a Nationally Recognized Testing Lab (NRTL)
marking and indicates conformance with UL 60601-1 and
CAN/CSA STD C22.2 NO 601.1-M90
Indicates that in the European Union, at the end of product life
this device must be disposed of in accordance with the
requirements of the Waste Electrical and Electronic Equipment
(WEEE) directive 2002/96/EC
LabelLocations
Schick 33/Elite USB Interface
Sensor